RC6432F104CS Equivalent & Substitute Parts Reference

Part Overview

The RC6432F104CS is a 100 kOhms ±1% 1W thick film chip resistor manufactured by Samsung Electro-Mechanics in the 2512 (6432 Metric) package. This component is classified as Active product status with full RoHS3 compliance and unlimited moisture sensitivity level (MSL 1). The part is suitable for general-purpose applications requiring precision resistive elements with moisture resistance in compact surface-mount form factors. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, and environmental ratings to ensure direct circuit board compatibility.

Key Parameters

Parameter	Value	Specification Basis
Resistance Value	100 kOhms	Primary electrical specification
Tolerance	±1%	Precision requirement
Power Rating	1W	Thermal dissipation capability
Package / Case	2512 (6432 Metric)	Physical footprint and mounting
Composition	Thick Film	Manufacturing technology
Temperature Coefficient	±100ppm/°C	Stability over temperature range
Operating Temperature Range	-55°C ~ 155°C	Environmental operating limits
RoHS Status	ROHS3 Compliant	Regulatory compliance
Moisture Sensitivity Level	1 (Unlimited)	Handling and storage requirements

Substitute Part Grouping Explanation

Substitute parts for the RC6432F104CS are categorized based on strict adherence to the following matching criteria:

Direct Substitutes (Electrical and Mechanical Equivalence): Parts that match all key parameters including 100 kOhms resistance, ±1% tolerance, 1W power rating, 2512 package, ±100ppm/°C temperature coefficient, -55°C to 155°C operating range, and thick film composition. These parts are interchangeable without circuit redesign.

Upgrade Substitutes (Enhanced Specifications): Parts that exceed the base specifications in power rating (2W instead of 1W) or include automotive-grade certifications (AEC-Q200) while maintaining all other electrical and mechanical parameters. These provide additional design margin or reliability assurance for demanding applications.

Similar Substitutes (Minor Dimensional Variations): Parts that maintain all electrical specifications and package designation but exhibit minor variations in physical dimensions (length, width, or height within manufacturing tolerances) or feature enhancements such as pulse withstanding capability. These are compatible with standard 2512 footprints.

Legacy/Restricted Substitutes (Product Status Considerations): Parts marked "Not For New Designs" that retain full electrical and mechanical compatibility but are subject to availability constraints and design phase restrictions.

The substitution logic is based exclusively on: resistance value, tolerance, power rating, package type, temperature coefficient, operating temperature range, composition type, and regulatory compliance status.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op Temp Range	Features	Product Status	RoHS Status
RC6432F104CS	Samsung Electro-Mechanics	100 kΩ	±1%	1W	2512	±100ppm/°C	-55°C ~ 155°C	Moisture Resistant	Active	ROHS3 Compliant
RC2512FK-07100KL	YAGEO	100 kΩ	±1%	1W	2512	±100ppm/°C	-55°C ~ 155°C	Moisture Resistant	Active	ROHS3 Compliant
AC2512FK-07100KL	YAGEO	100 kΩ	±1%	1W	2512	±100ppm/°C	-55°C ~ 155°C	Automotive AEC-Q200, Moisture Resistant	Active	ROHS3 Compliant
RHC2512FT100K	Stackpole Electronics Inc	100 kΩ	±1%	2W	2512	±100ppm/°C	-55°C ~ 155°C	Moisture Resistant	Active	ROHS3 Compliant
CRCW2512100KFKEG	Vishay Dale	100 kΩ	±1%	1W	2512	±100ppm/°C	-55°C ~ 155°C	Automotive AEC-Q200	Active	ROHS3 Compliant
CRCW2512100KFKEGHP	Vishay Dale	100 kΩ	±1%	1.5W	2512	±100ppm/°C	-55°C ~ 155°C	Automotive AEC-Q200, Pulse Withstanding	Active	ROHS3 Compliant
CRCW2512100KFKTG	Vishay Dale	100 kΩ	±1%	1W	2512	±100ppm/°C	-55°C ~ 155°C	Automotive AEC-Q200	Active	RoHS non-compliant
ERJ-1TNF1003U	Panasonic Electronic Components	100 kΩ	±1%	1W	2512	±100ppm/°C	-55°C ~ 155°C	Automotive AEC-Q200	Not For New Designs	ROHS3 Compliant
RMCF2512FT100K	Stackpole Electronics Inc	100 kΩ	±1%	1W	2512	±100ppm/°C	-55°C ~ 155°C	Automotive AEC-Q200	Active	ROHS3 Compliant

Engineering Selection Recommendations

Primary Direct Substitute: RC2512FK-07100KL (YAGEO) provides complete electrical and mechanical equivalence to the RC6432F104CS with identical 1W power rating, ±1% tolerance, and moisture resistance. Both parts maintain Active product status and ROHS3 compliance. This part is suitable for direct replacement in existing designs without modification.

Recommended Upgrade Substitute for Enhanced Reliability: AC2512FK-07100KL (YAGEO) or RMCF2512FT100K (Stackpole Electronics Inc) are recommended when automotive-grade qualification (AEC-Q200) is required or when design margin improvement is beneficial. Both maintain 1W power rating and full electrical compatibility while adding automotive certification. RMCF2512FT100K is preferred for active production due to higher inventory availability (34,615 pcs).

High-Power Margin Substitute: RHC2512FT100K (Stackpole Electronics Inc) provides 2W power rating while maintaining all other specifications. This upgrade is applicable when thermal stress reduction or extended component life is a design objective. The increased power rating does not affect electrical performance in 1W-rated circuits.

Pulse-Withstanding Variant: CRCW2512100KFKEGHP (Vishay Dale) at 1.5W with pulse withstanding capability is suitable for circuits experiencing transient overvoltage conditions while maintaining standard electrical specifications.

Compliance Consideration: CRCW2512100KFKTG (Vishay Dale) is marked RoHS non-compliant and REACH Affected. This part is not recommended for new designs or applications requiring regulatory compliance documentation.

Legacy Component Status: ERJ-1TNF1003U (Panasonic Electronic Components) is marked "Not For New Designs" despite full electrical and mechanical compatibility. This designation restricts its use to existing production support or legacy system maintenance only.

Frequently Asked Questions (FAQ)

Q: Can RC2512FK-07100KL be used as a direct replacement for RC6432F104CS without circuit modification?

A: Yes. RC2512FK-07100KL matches all critical electrical parameters (100 kΩ, ±1%, 1W, ±100ppm/°C, -55°C to 155°C) and package specification (2512). Both parts are Active status with ROHS3 compliance and MSL 1. No circuit redesign is required.

Q: What is the difference between the 1W and 2W power-rated substitutes?

A: Power rating indicates maximum continuous thermal dissipation capability. RHC2512FT100K (2W) can dissipate twice the thermal energy compared to the 1W base specification. In circuits designed for 1W operation, the 2W variant provides additional thermal margin and extended component life but does not change electrical performance. Selection depends on thermal design requirements.

Q: Are automotive-grade parts (AEC-Q200) required for non-automotive applications?

A: No. AEC-Q200 certification is an upgrade specification providing enhanced reliability testing and qualification. For general-purpose applications, standard industrial-grade parts such as RC2512FK-07100KL are sufficient. Automotive-grade variants (AC2512FK-07100KL, RMCF2512FT100K, CRCW2512100KFKEG) are recommended only when automotive reliability standards or customer specifications mandate this certification.

Q: Why is ERJ-1TNF1003U marked "Not For New Designs"?

A: This designation indicates the manufacturer has discontinued active development and recommends alternative parts for new product designs. ERJ-1TNF1003U remains available for existing production support but should not be selected for new circuit designs. RMCF2512FT100K or CRCW2512100KFKEG are recommended alternatives.

Q: What is the significance of minor dimensional variations (length, width, height) between substitute parts?

A: All listed substitutes conform to the 2512 (6432 Metric) package standard. Minor dimensional variations within manufacturing tolerances (typically ±0.05mm) do not affect PCB footprint compatibility or mounting. Standard 2512 land patterns accommodate all listed parts without modification.

Q: Is CRCW2512100KFKTG suitable for new designs despite RoHS non-compliance?

A: No. CRCW2512100KFKTG is marked RoHS non-compliant and REACH Affected. This part does not meet current regulatory requirements for most markets and should not be selected for new designs. Use CRCW2512100KFKEG (RoHS3 compliant variant) or alternative compliant parts instead.

Q: What does Moisture Sensitivity Level (MSL) 1 mean for component handling?

A: MSL 1 indicates unlimited shelf life without moisture-related degradation. Components rated MSL 1 do not require special dry-pack storage, desiccant handling, or bake-out procedures before soldering. All listed substitutes maintain MSL 1 rating, ensuring consistent handling requirements across the product family.

Q: Can CRCW2512100KFKEGHP (1.5W, pulse withstanding) be used in standard 1W circuits?

A: Yes. The 1.5W power rating and pulse withstanding feature are enhancements that do not degrade performance in standard 1W applications. This variant is suitable when circuits experience transient voltage spikes or when additional thermal margin is desired. Electrical characteristics (resistance, tolerance, temperature coefficient) remain identical to the base specification.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message