RC6432F103CS Equivalent & Substitute Parts Reference

Part Overview

The RC6432F103CS is a 10 kOhms ±1% 1W chip resistor manufactured by Samsung Electro-Mechanics in the 2512 (6432 Metric) package. This thick film, moisture-resistant component operates across -55°C to 155°C and is ROHS3 compliant. The part is currently active in production with 1163 units in stock. Equivalent and substitute parts are identified based on matching electrical specifications (resistance value, tolerance, power rating) and mechanical compatibility (package size, termination count, operating temperature range).

Key Parameters

Parameter	RC6432F103CS Value
Resistance	10 kOhms
Tolerance	±1%
Power Rating	1W
Package / Case	2512 (6432 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Number of Terminations	2
Moisture Sensitivity Level	1 (Unlimited)
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

Resistance value: 10 kOhms
Tolerance: ±1%
Package / Case: 2512 (6432 Metric)
Number of Terminations: 2
Temperature Coefficient: ±100ppm/°C
Operating Temperature Range: -55°C ~ 155°C
Composition: Thick Film
Moisture Sensitivity Level: 1 (Unlimited)

Allowable Variation Parameters:

Power Rating: 1W (main part) to 2W (substitute parts with higher power ratings are acceptable for direct substitution as they provide equal or greater capability)
Packaging format: Cut Tape (CT), Digi-Reel®, or Tape & Reel (TR) are interchangeable based on procurement requirements
Manufacturer: Multiple qualified manufacturers (Samsung Electro-Mechanics, YAGEO, Stackpole Electronics Inc, Vishay Dale, Bourns Inc., Panasonic Electronic Components)
RoHS and REACH compliance: ROHS3 compliant parts are preferred; non-compliant parts noted separately
Certifications: AEC-Q200 automotive qualification is an enhancement, not a requirement for substitution

Parts are grouped into three categories:

Direct Substitutes: Identical electrical and mechanical specifications with 1W power rating Upgrade Substitutes: Enhanced specifications (higher power rating, automotive qualification) maintaining full backward compatibility Similar Substitutes: Equivalent core specifications with variations in power rating or specialized features (current sense, pulse withstanding)

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op Temp Range	RoHS Status	Product Status
RC6432F103CS	Samsung Electro-Mechanics	10 kOhms	±1%	1	2512	±100ppm/°C	-55°C ~ 155°C	ROHS3 Compliant	Active
RC2512FK-0710KL	YAGEO	10 kOhms	±1%	1	2512	±100ppm/°C	-55°C ~ 155°C	ROHS3 Compliant	Active
AC2512FK-0710KL	YAGEO	10 kOhms	±1%	1	2512	±100ppm/°C	-55°C ~ 155°C	ROHS3 Compliant	Active
RHC2512FT10K0	Stackpole Electronics Inc	10 kOhms	±1%	2	2512	±100ppm/°C	-55°C ~ 155°C	ROHS3 Compliant	Active
CRCW251210K0FKEG	Vishay Dale	10 kOhms	±1%	1	2512	±100ppm/°C	-55°C ~ 155°C	ROHS3 Compliant	Active
CRCW251210K0FKEGHP	Vishay Dale	10 kOhms	±1%	1.5	2512	±100ppm/°C	-55°C ~ 155°C	ROHS3 Compliant	Active
CRCW251210K0FKTG	Vishay Dale	10 kOhms	±1%	1	2512	±100ppm/°C	-55°C ~ 155°C	RoHS non-compliant	Active
CRM2512-FX-1002ELF	Bourns Inc.	10 kOhms	±1%	2	2512	±100ppm/°C	-55°C ~ 155°C	ROHS3 Compliant	Active
ERJ-1TNF1002U	Panasonic Electronic Components	10 kOhms	±1%	1	2512	±100ppm/°C	-55°C ~ 155°C	ROHS3 Compliant	Not For New Designs

Engineering Selection Recommendations

Direct Substitutes (Preferred for 1:1 Replacement):

RC2512FK-0710KL (YAGEO) and CRCW251210K0FKEG (Vishay Dale) are direct electrical and mechanical equivalents to RC6432F103CS. Both maintain 1W power rating, ±1% tolerance, and ROHS3 compliance. RC2512FK-0710KL offers 5400 units in stock; CRCW251210K0FKEG provides 33050 units. Both are suitable for applications requiring no design modification.

Upgrade Substitutes (Enhanced Capability):

AC2512FK-0710KL (YAGEO) adds automotive AEC-Q200 qualification while maintaining electrical equivalence. RHC2512FT10K0 (Stackpole Electronics Inc) and CRM2512-FX-1002ELF (Bourns Inc.) provide 2W power rating, offering thermal margin above the 1W requirement. These upgrades are backward compatible and introduce no compatibility risk.

Conditional Substitutes:

CRCW251210K0FKEGHP (Vishay Dale) provides 1.5W power rating with pulse withstanding capability. ERJ-1TNF1002U (Panasonic Electronic Components) is electrically equivalent but marked "Not For New Designs," limiting its use to legacy system support or existing inventory management.

Non-Compliant Substitute:

CRCW251210K0FKTG (Vishay Dale) is RoHS non-compliant and REACH affected. Use only in applications where regulatory compliance is not required.

Frequently Asked Questions (FAQ)

Q: Can I substitute RC2512FK-0710KL for RC6432F103CS without circuit modification?

A: Yes. RC2512FK-0710KL is a direct substitute with identical resistance (10 kOhms), tolerance (±1%), power rating (1W), package (2512), and operating temperature range (-55°C ~ 155°C). Both are ROHS3 compliant and moisture resistant. No circuit redesign is required.

Q: What is the difference between 1W and 2W rated substitutes?

A: The 2W-rated parts (RHC2512FT10K0, CRM2512-FX-1002ELF) provide higher power dissipation capability. They are fully backward compatible with 1W applications, as they can safely handle the same or lower power levels. Use 2W parts when thermal margin or future design headroom is desired.

Q: Are automotive-qualified parts (AEC-Q200) required for this application?

A: AEC-Q200 qualification is not mandatory for substitution. AC2512FK-0710KL and CRCW251210K0FKEG include this certification as an enhancement. Use automotive-qualified parts only if your application or procurement specification explicitly requires AEC-Q200 compliance.

Q: Why is ERJ-1TNF1002U marked "Not For New Designs"?

A: This designation indicates the part is in mature/legacy status. It remains electrically and mechanically equivalent but is not recommended for new product development. Use only for sustaining existing designs or when legacy inventory must be consumed.

Q: Can I use CRCW251210K0FKTG in a RoHS-regulated application?

A: No. CRCW251210K0FKTG is RoHS non-compliant and REACH affected. Use only in applications where regulatory compliance is not required. For RoHS-compliant designs, select CRCW251210K0FKEG or CRCW251210K0FKEGHP instead.

Q: What is the difference between Cut Tape (CT) and Tape & Reel (TR) packaging?

A: Both are standard SMD packaging formats. Cut Tape is suitable for small-quantity manual assembly; Tape & Reel is optimized for high-volume automated pick-and-place operations. Electrical and mechanical specifications are identical. Select based on procurement volume and assembly process requirements.

Q: Are all substitute parts available in the same inventory quantities?

A: No. Inventory levels vary by manufacturer and distributor. RC6432F103CS has 1163 units; RC2512FK-0710KL has 5400 units; CRCW251210K0FKEG has 33050 units. Verify current stock before finalizing procurement decisions.

Q: Can I mix different manufacturers' parts in the same assembly?

A: Yes. All listed substitutes meet identical electrical and mechanical specifications. Mixing manufacturers is acceptable from a functional standpoint. However, verify procurement, quality, and traceability requirements with your supply chain and quality departments.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message