RC5025J823CS Equivalent & Substitute Parts Reference

Part Overview

The RC5025J823CS is an 82 kOhms ±5% thick film chip resistor manufactured by Samsung Electro-Mechanics in the 2010 (5025 Metric) package format. This component is rated for 0.667W (2/3W) power dissipation and features moisture-resistant construction suitable for general-purpose electronic applications. The part maintains Active product status with 941 units currently in stock. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are required due to inventory constraints, supply chain considerations, or design flexibility needs.

Substiute Parts

RC5025J823CS

Samsung Electro-MechanicsIn Stock: 973RC5025J823CS Datasheet

Current PartRFQ

RC2010JK-0782KL

YAGEOIn Stock: 6947RC2010JK-0782KL Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RC5025J823CS is determined by strict alignment with the following critical parameters:

Electrical Compatibility Requirements:

• Resistance value: 82 kOhms (exact match required)
• Tolerance: ±5% (exact match required)
• Temperature coefficient: ±100ppm/°C (exact match required)
• Operating temperature range: -55°C ~ 155°C (exact match or superior range required)

Mechanical Compatibility Requirements:

• Package / Case: 2010 (5025 Metric) (exact match required)
• Composition: Thick Film (exact match required)
• Moisture resistance: Present (exact match required)

Compliance Requirements:

• RoHS Status: ROHS3 Compliant (exact match required)
• Moisture Sensitivity Level: 1 (Unlimited) (exact match required)

Power Rating Consideration: The substitute part RC2010JK-0782KL is rated at 0.75W (3/4W), which exceeds the main part's 0.667W (2/3W) specification. This represents an upgrade in power dissipation capability and is acceptable for direct substitution in applications where the original 0.667W rating is sufficient, as the higher-rated component will operate within safe thermal margins.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection (RC5025J823CS): The Samsung Electro-Mechanics RC5025J823CS is the specified component with Active product status and ROHS3 compliance. Selection of this part is appropriate when Samsung supply chain availability and the 0.667W power rating meet application requirements.

Substitute Selection (RC2010JK-0782KL): The YAGEO RC2010JK-0782KL is a direct electrical and mechanical substitute with identical resistance, tolerance, temperature coefficient, and operating temperature specifications. The elevated power rating of 0.75W (3/4W) versus 0.667W (2/3W) provides additional thermal margin without affecting circuit performance. This part maintains ROHS3 compliance and MSL 1 rating. Selection of this substitute is appropriate when YAGEO supply chain availability is preferred or when the enhanced power rating provides design flexibility. Both parts are suitable for PCB assembly in Tape & Reel packaging format.

Frequently Asked Questions (FAQ)

Q: Can RC2010JK-0782KL replace RC5025J823CS in existing designs?

A: Yes. The RC2010JK-0782KL is electrically and mechanically compatible. Both components share identical resistance (82 kOhms), tolerance (±5%), temperature coefficient (±100ppm/°C), operating temperature range (-55°C ~ 155°C), package format (2010 / 5025 Metric), and composition (thick film). The substitute's higher power rating (0.75W vs. 0.667W) does not create compatibility issues and operates within safe thermal parameters for applications designed for the original part.

Q: What is the significance of the power rating difference?

A: The RC2010JK-0782KL is rated at 0.75W (3/4W) compared to the RC5025J823CS at 0.667W (2/3W). This represents a 12.5% increase in power dissipation capability. For circuits designed around the 0.667W specification, the substitute will operate at lower thermal stress, extending component life and improving reliability margins. No circuit redesign is required.

Q: Are both parts RoHS compliant?

A: Yes. Both RC5025J823CS and RC2010JK-0782KL are ROHS3 Compliant, meeting environmental and regulatory requirements for electronic component manufacturing and assembly.

Q: What is the Moisture Sensitivity Level (MSL) for these parts?

A: Both parts carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions. These components do not require special moisture control during storage, handling, or assembly processes.

Q: Are the physical dimensions identical?

A: Yes. Both parts measure 0.197" L x 0.098" W (5.00mm x 2.50mm) with maximum seated heights of 0.026" (0.66mm for Samsung, 0.65mm for YAGEO). These dimensions are compatible with standard 2010 package footprints on PCBs.

Q: What packaging formats are available?

A: The RC5025J823CS is available in standard packaging. The RC2010JK-0782KL is supplied in Tape & Reel (TR) format, suitable for automated PCB assembly processes.

Q: Can these parts be used interchangeably in production?

A: Yes, provided that supply chain and inventory management systems are updated to reflect the substitution. Both parts meet identical electrical specifications and mechanical requirements for the 2010 package format.