RC5025J474CS Equivalent & Substitute Parts Reference

Part Overview

The RC5025J474CS is a 470 kOhms ±5% thick film chip resistor manufactured by Samsung Electro-Mechanics in the 2010 (5025 Metric) package format with 0.667W power rating. This component is classified as Active product status and is RoHS3 compliant with MSL Level 1 moisture sensitivity rating. Substitute parts are identified when equivalent resistance values, package dimensions, and operating temperature ranges align with application requirements while offering improved tolerance, power rating, or specialized certifications.

Substiute Parts

RC5025J474CS

Samsung Electro-MechanicsIn Stock: 1201RC5025J474CS Datasheet

Current PartRFQ

RC2010FK-07470KL

YAGEOIn Stock: 12439RC2010FK-07470KL Datasheet

UpgradeRFQ

RC2010JK-07470KL

YAGEOIn Stock: 6547RC2010JK-07470KL Datasheet

UpgradeRFQ

CRCW2010470KFKEF

Vishay DaleIn Stock: 7792CRCW2010470KFKEF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RC5025J474CS are qualified based on the following criteria:

Mandatory Matching Parameters:

• Resistance value: 470 kOhms (exact match required)
• Package / Case: 2010 (5025 Metric) (physical compatibility)
• Operating temperature range: -55°C ~ 155°C (minimum requirement)
• Composition: Thick Film (technology consistency)
• Temperature coefficient: ±100ppm/°C (stability requirement)

Allowable Variations:

• Tolerance: Can be equal or tighter (±5% or ±1%)
• Power rating: Can be equal or higher (0.667W or 0.75W)
• Manufacturer: Different manufacturers acceptable if all parameters align
• Certifications: Additional certifications (AEC-Q200) acceptable for automotive applications

Substitute Classification:

Upgrade Substitutes (RC2010FK-07470KL, RC2010JK-07470KL): YAGEO manufactured parts offering higher power rating (0.75W vs 0.667W) with identical or tighter tolerance specifications. Both maintain 2010 package format and full operating temperature range.

Similar Substitute (CRCW2010470KFKEF): Vishay Dale manufactured part with automotive AEC-Q200 qualification, ±1% tolerance, and 0.75W power rating. Suitable for applications requiring automotive-grade reliability.

Parameter Comparison

Engineering Selection Recommendations

RC2010FK-07470KL (YAGEO): Select this upgrade substitute when circuit design permits higher power dissipation capability and tighter tolerance (±1%) is required. The 0.75W rating provides 12.5% additional thermal margin compared to the original 0.667W specification. ROHS3 compliance and MSL 1 rating maintain environmental and handling compatibility. Tape & Reel packaging supports automated assembly processes.

RC2010JK-07470KL (YAGEO): Select this upgrade substitute when maintaining the original ±5% tolerance is acceptable while benefiting from increased power rating (0.75W). This option provides direct tolerance matching with the main part while offering thermal design margin. Suitable for cost-optimized designs where tolerance relaxation is not a constraint.

CRCW2010470KFKEF (Vishay Dale): Select this substitute exclusively for automotive applications requiring AEC-Q200 qualification. The ±1% tolerance and 0.75W power rating exceed the original specifications. ROHS3 compliance and MSL 1 rating are maintained. Height specification (0.028" maximum) is marginally higher than the main part (0.026" maximum) but remains within 2010 package class tolerances.

All substitute parts maintain Active product status and full compliance with RoHS3 and REACH requirements.

Frequently Asked Questions (FAQ)

Q: Can RC2010FK-07470KL directly replace RC5025J474CS in existing designs?

A: Yes. Both parts share identical resistance value (470 kOhms), package format (2010/5025 Metric), operating temperature range (-55°C ~ 155°C), and composition (thick film). The substitute offers improved tolerance (±1% vs ±5%) and higher power rating (0.75W vs 0.667W), making it functionally compatible and thermally superior.

Q: What is the difference between the two YAGEO upgrade options?

A: RC2010FK-07470KL provides ±1% tolerance with 0.75W power rating. RC2010JK-07470KL provides ±5% tolerance (matching the original) with 0.75W power rating. Select RC2010FK-07470KL for applications requiring tighter accuracy; select RC2010JK-07470KL for cost optimization when tolerance matching is preferred.

Q: Is CRCW2010470KFKEF suitable for non-automotive applications?

A: Yes. CRCW2010470KFKEF meets all electrical and environmental requirements for general industrial applications. The AEC-Q200 automotive certification is an additional qualification that does not restrict use in non-automotive circuits. The ±1% tolerance and 0.75W power rating make it suitable for precision applications.

Q: Are there packaging differences between the main part and substitutes?

A: The main part (RC5025J474CS) is supplied in standard packaging. RC2010FK-07470KL and RC2010JK-07470KL are supplied in Tape & Reel (TR) format, which is standard for automated assembly. Physical dimensions remain within 2010 package class specifications. Height variation (0.026" to 0.028" maximum) is within tolerance for PCB assembly.

Q: Do all parts meet moisture sensitivity requirements?

A: Yes. All parts including the main part and all substitutes carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions. Storage and handling requirements are identical across all options.

Q: Can substitutes be mixed in the same production batch?

A: Yes, provided circuit design tolerates the tolerance and power rating variations. For designs sensitive to tolerance stack-up, maintain single-source parts. For thermal margin applications, any substitute offers equivalent or improved performance.