RC5025J470CS Equivalent & Substitute Parts Reference

Part Overview

The RC5025J470CS is a 47 Ohm ±5% thick film chip resistor manufactured by Samsung Electro-Mechanics in the 2010 (5025 Metric) package format with 0.667W power rating. This component is classified as Active product status with full RoHS3 compliance and unlimited moisture sensitivity level (MSL 1). The RC5025J470CS serves as a standard general-purpose resistor for applications requiring moisture-resistant thick film construction across industrial and commercial temperature ranges (-55°C to 155°C). Equivalent and substitute parts are identified to address inventory availability, performance upgrades, or application-specific requirements such as automotive qualification or enhanced tolerance specifications.

Key Parameters

Parameter	Value	Significance for Substitution
Resistance Value	47 Ohms	Must match exactly for direct substitution
Tolerance	±5%	Determines accuracy class; tighter tolerance (±1%) is acceptable upgrade
Power Rating	0.667W (2/3W)	Minimum requirement; higher ratings provide design margin
Package / Case	2010 (5025 Metric)	Must match for PCB footprint compatibility
Composition	Thick Film	Determines electrical characteristics and temperature behavior
Temperature Coefficient	±100ppm/°C	Defines stability across operating temperature range
Operating Temperature	-55°C ~ 155°C	Must support application temperature requirements
RoHS Status	ROHS3 Compliant	Regulatory requirement for most applications
Moisture Sensitivity Level	MSL 1 (Unlimited)	Determines handling and storage requirements

Substitute Part Grouping Explanation

Substitute parts for the RC5025J470CS are classified into two categories based on electrical and mechanical compatibility:

Upgrade Substitutes provide enhanced specifications while maintaining full compatibility:

Tolerance improvement from ±5% to ±1% (tighter accuracy)
Power rating increase from 0.667W to 0.75W or 1W (higher dissipation capability)
Automotive AEC-Q200 qualification (enhanced reliability for automotive applications)
All upgrade substitutes maintain identical 47 Ohm resistance, 2010 package format, thick film composition, ±100ppm/°C temperature coefficient, and -55°C to 155°C operating range

Similar Substitutes maintain equivalent electrical performance with alternative feature sets:

Tolerance options at ±5% matching the original specification
Power ratings from 0.75W to 1W (exceeding minimum requirement)
Alternative feature implementations (Pulse Withstanding, Automotive AEC-Q200)
All similar substitutes maintain identical 47 Ohm resistance, 2010 package format, thick film composition, and temperature characteristics

Substitution is valid only when the substitute part meets or exceeds the original part's electrical and thermal requirements while maintaining identical package footprint and composition type.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (Watts)	Package	Composition	Temp Coeff	Operating Temp	Features	RoHS Status	MSL
RC5025J470CS	Samsung Electro-Mechanics	47 Ω	±5%	0.667W	2010	Thick Film	±100ppm/°C	-55°C ~ 155°C	Moisture Resistant	ROHS3	1
RC2010FK-0747RL	YAGEO	47 Ω	±1%	0.75W	2010	Thick Film	±100ppm/°C	-55°C ~ 155°C	Moisture Resistant	ROHS3	1
RMCF2010FT47R0	Stackpole Electronics Inc	47 Ω	±1%	0.75W	2010	Thick Film	±100ppm/°C	-55°C ~ 155°C	Automotive AEC-Q200	ROHS3	1
RMCP2010FT47R0	Stackpole Electronics Inc	47 Ω	±1%	1W	2010	Thick Film	±100ppm/°C	-55°C ~ 155°C	Automotive AEC-Q200	ROHS3	1
CRCW201047R0FKEF	Vishay Dale	47 Ω	±1%	0.75W	2010	Thick Film	±100ppm/°C	-55°C ~ 155°C	Automotive AEC-Q200	ROHS3	1
CRGS2010J47R	TE Connectivity AMP Connectors	47 Ω	±5%	0.75W	2010	Thick Film	±100ppm/°C	-55°C ~ 155°C	Pulse Withstanding	RoHS Compliant	N/A
RPC2010JT47R0	Stackpole Electronics Inc	47 Ω	±5%	0.75W	2010	Thick Film	±100ppm/°C	-55°C ~ 155°C	Automotive AEC-Q200, Pulse Withstanding	ROHS3	1

Engineering Selection Recommendations

For Direct Replacement (Equivalent Performance): Select CRGS2010J47R or RPC2010JT47R0 when maintaining the original ±5% tolerance specification is required. Both parts provide increased power dissipation (0.75W versus 0.667W) while preserving tolerance class. RPC2010JT47R0 adds Automotive AEC-Q200 qualification and ROHS3 compliance for enhanced reliability documentation.

For Tolerance Upgrade (±1% Accuracy): Select RC2010FK-0747RL, RMCF2010FT47R0, RMCP2010FT47R0, or CRCW201047R0FKEF when tighter tolerance specifications improve circuit performance. RC2010FK-0747RL provides standard industrial qualification. RMCF2010FT47R0 and CRCW201047R0FKEF offer 0.75W power with Automotive AEC-Q200 qualification. RMCP2010FT47R0 provides maximum power dissipation (1W) with Automotive AEC-Q200 qualification.

For Automotive Applications: Select RMCF2010FT47R0, RMCP2010FT47R0, CRCW201047R0FKEF, or RPC2010JT47R0 when AEC-Q200 automotive qualification is required. All four parts meet automotive reliability standards with ROHS3 compliance and MSL 1 rating.

For Pulse Withstanding Applications: Select CRGS2010J47R or RPC2010JT47R0 when pulse immunity is specified. Both parts feature pulse withstanding thick film construction with identical temperature characteristics and operating range.

All substitute parts maintain identical 2010 package footprint, thick film composition, ±100ppm/°C temperature coefficient, and -55°C to 155°C operating temperature range, ensuring direct PCB compatibility and thermal performance equivalence.

Frequently Asked Questions (FAQ)

Q: Can RC2010FK-0747RL replace RC5025J470CS directly on the PCB? A: Yes. Both parts use identical 2010 (5025 Metric) package format with matching footprint dimensions (5.00mm L × 2.50mm W). RC2010FK-0747RL provides improved ±1% tolerance and increased 0.75W power rating, making it a direct upgrade substitute.

Q: What is the difference between ±5% and ±1% tolerance specifications? A: Tolerance defines the maximum deviation from the nominal 47 Ohm resistance value. ±5% tolerance allows deviation from 44.65 Ohms to 49.35 Ohms. ±1% tolerance restricts deviation to 46.53 Ohms to 47.47 Ohms. Tighter tolerance (±1%) provides superior accuracy for precision circuits but may increase component cost.

Q: Why do some substitutes have higher power ratings (0.75W or 1W) than the original 0.667W? A: Higher power ratings provide thermal design margin and extended component life under sustained current conditions. A 0.75W or 1W rated resistor can safely dissipate the original 0.667W requirement with reduced junction temperature and improved reliability. This is a beneficial upgrade characteristic.

Q: Is RMCP2010FT47R0 compatible with non-automotive applications? A: Yes. RMCP2010FT47R0 meets Automotive AEC-Q200 qualification, which exceeds standard industrial requirements. Automotive-qualified components are fully compatible with general industrial and commercial applications and provide enhanced reliability documentation.

Q: What does Automotive AEC-Q200 qualification mean? A: AEC-Q200 is the automotive electronics council qualification standard for passive components. It certifies that the component meets automotive industry reliability, temperature cycling, and failure rate requirements. AEC-Q200 qualified parts are suitable for automotive, industrial, and commercial applications.

Q: Can I substitute a part with different MSL (Moisture Sensitivity Level)? A: MSL 1 (Unlimited) indicates no moisture sensitivity restrictions. CRGS2010J47R lists MSL as Not Applicable, indicating equivalent moisture handling. Parts with MSL 1 rating are preferred for standard manufacturing environments without special moisture control requirements.

Q: Are all substitute parts RoHS3 compliant? A: Most substitutes are ROHS3 compliant. CRGS2010J47R is listed as RoHS Compliant (standard RoHS). For applications requiring strict ROHS3 compliance, select RC2010FK-0747RL, RMCF2010FT47R0, RMCP2010FT47R0, CRCW201047R0FKEF, or RPC2010JT47R0.

Q: What is the temperature coefficient ±100ppm/°C specification? A: Temperature coefficient defines resistance change per degree Celsius across the operating range. ±100ppm/°C means the resistance value changes by maximum 0.01% per °C. All listed parts share identical ±100ppm/°C specification, ensuring equivalent temperature stability.

Q: Can I use RPC2010JT47R0 in pulse-sensitive circuits? A: Yes. RPC2010JT47R0 features both Automotive AEC-Q200 qualification and Pulse Withstanding construction, making it suitable for circuits experiencing voltage or current transients. Pulse withstanding thick film construction provides enhanced surge immunity.

Q: What is the maximum operating temperature for all substitute parts? A: All parts, including the original RC5025J470CS, support -55°C to 155°C operating temperature range. This specification is identical across all substitutes, ensuring equivalent thermal performance in temperature-variable applications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message