RC5025J334CS Equivalent & Substitute Parts Reference

Part Overview

The RC5025J334CS is a 330 kOhms ±5% thick film chip resistor manufactured by Samsung Electro-Mechanics in the 2010 (5025 Metric) package format with 0.667W power rating. This component is classified as Active product status and is RoHS3 compliant with MSL Level 1 moisture sensitivity rating. Substitute parts are identified to address application requirements for enhanced tolerance specifications or increased power dissipation capacity while maintaining electrical and mechanical compatibility within the 2010 package footprint.

Substiute Parts

RC5025J334CS

Samsung Electro-MechanicsIn Stock: 961RC5025J334CS Datasheet

Current PartRFQ

RC2010FK-07330KL

YAGEOIn Stock: 8897RC2010FK-07330KL Datasheet

UpgradeRFQ

RC2010JK-07330KL

YAGEOIn Stock: 8140RC2010JK-07330KL Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RC5025J334CS are qualified based on the following criteria:

Electrical Compatibility: Resistance value must be 330 kOhms. Tolerance and power rating may be upgraded to meet enhanced circuit requirements.

Mechanical Compatibility: Package format must remain 2010 (5025 Metric) to ensure PCB footprint compatibility and assembly process alignment.

Environmental & Compliance: Operating temperature range, composition (thick film), moisture resistance, RoHS3 compliance, and MSL Level 1 rating must be maintained or exceeded.

Substitution Logic: The RC2010JK-07330KL and RC2010FK-07330KL are qualified substitutes because they maintain identical resistance value, package format, and environmental specifications while offering increased power dissipation (0.75W vs. 0.667W). The RC2010FK-07330KL additionally provides tighter tolerance (±1% vs. ±5%), enabling use in precision applications.

Parameter Comparison

Engineering Selection Recommendations

Direct Substitution (RC2010JK-07330KL): This YAGEO component maintains identical tolerance specification (±5%) while providing 12.5% increased power dissipation capacity (0.75W vs. 0.667W). Both components are Active status with full RoHS3 and REACH compliance. Selection is appropriate for applications requiring higher thermal margin within the same tolerance class.

Precision Upgrade (RC2010FK-07330KL): This YAGEO component offers tighter tolerance (±1% vs. ±5%) with equivalent power rating increase (0.75W). Both components maintain Active product status and full regulatory compliance. Selection is appropriate for precision analog circuits or applications with stringent resistance value requirements.

Compliance Verification: All three components maintain ROHS3 compliance, MSL Level 1 rating, and REACH Unaffected status, ensuring regulatory alignment across substitution options.

Frequently Asked Questions (FAQ)

Q: Can RC2010JK-07330KL replace RC5025J334CS in any application?

A: Yes, within the constraints of tolerance and power rating. The RC2010JK-07330KL maintains ±5% tolerance identical to the main part while providing higher power dissipation (0.75W vs. 0.667W). The identical package format (2010), resistance value (330 kOhms), and environmental specifications ensure PCB compatibility and functional equivalence.

Q: What is the primary difference between RC2010JK-07330KL and RC2010FK-07330KL?

A: Both are YAGEO 2010 package resistors with 330 kOhms resistance and 0.75W power rating. The RC2010FK-07330KL provides ±1% tolerance compared to ±5% for the RC2010JK-07330KL. Selection depends on circuit tolerance requirements.

Q: Are there any height or footprint differences between the main part and substitutes?

A: No. All three components use the 2010 (5025 Metric) package with identical length (0.197" / 5.00mm) and width (0.098" / 2.50mm). Maximum seated height is 0.026" (0.66mm for main part, 0.65mm for substitutes), representing negligible variation within PCB assembly tolerances.

Q: Do the substitute parts maintain the same moisture sensitivity rating?

A: Yes. All three components carry MSL Level 1 (Unlimited) rating, indicating no moisture sensitivity restrictions for storage, handling, or reflow processing.

Q: What is the temperature coefficient specification across all three parts?

A: All components specify ±100ppm/°C temperature coefficient with operating range -55°C ~ 155°C, ensuring thermal stability equivalence across substitution options.