RC5025J224CS Equivalent & Substitute Parts Reference

Part Overview

The RC5025J224CS is a 220 kOhms ±5% 0.667W thick film chip resistor manufactured by Samsung Electro-Mechanics in the 2010 (5025 Metric) package. This component is classified as Active product status and is designed for general-purpose applications requiring moisture-resistant thick film construction. Equivalent and substitute parts are identified when circuit designs require alternative sourcing, inventory optimization, or enhanced performance specifications within compatible electrical and mechanical parameters.

Substiute Parts

RC5025J224CS

Samsung Electro-MechanicsIn Stock: 1049RC5025J224CS Datasheet

Current PartRFQ

RC2010FK-07220KL

YAGEOIn Stock: 8577RC2010FK-07220KL Datasheet

UpgradeRFQ

RC2010JK-07220KL

YAGEOIn Stock: 1787RC2010JK-07220KL Datasheet

UpgradeRFQ

CRCW2010220KFKEF

Vishay DaleIn Stock: 7443CRCW2010220KFKEF Datasheet

SimilarRFQ

RMCF2010FT220K

Stackpole Electronics IncIn Stock: 16492RMCF2010FT220K Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RC5025J224CS are qualified based on the following criteria:

Mandatory Compatibility Parameters:

• Resistance value: 220 kOhms (exact match required)
• Package / Case: 2010 (5025 Metric) (physical and electrical footprint compatibility)
• Temperature Coefficient: ±100ppm/°C (thermal stability equivalence)
• Operating Temperature Range: -55°C ~ 155°C (thermal envelope match)
• Composition: Thick Film (material consistency)
• RoHS3 Compliance: Required for regulatory alignment
• Moisture Sensitivity Level: 1 (Unlimited) (environmental robustness)

Allowable Variation Parameters:

• Tolerance: ±5% or tighter (±1% represents performance upgrade)
• Power Rating: 0.667W or higher (0.75W represents thermal margin upgrade)
• Manufacturer: Samsung Electro-Mechanics, YAGEO, Vishay Dale, Stackpole Electronics Inc
• Packaging Format: Tape & Reel acceptable for production environments

Substitutes are classified as Upgrade when tolerance improves to ±1% or power rating increases to 0.75W, or Similar when additional certifications (AEC-Q200 automotive qualification) are present.

Parameter Comparison

Engineering Selection Recommendations

RC2010JK-07220KL (YAGEO): This upgrade substitute maintains ±5% tolerance matching the original specification while increasing power rating to 0.75W and improving thermal margin. ROHS3 compliance and MSL 1 rating confirm regulatory and environmental equivalence. Suitable for direct replacement in applications where tolerance specification is non-critical.

RC2010FK-07220KL (YAGEO): This upgrade substitute improves tolerance to ±1% while increasing power rating to 0.75W. ROHS3 compliance and MSL 1 rating confirm full regulatory alignment. Appropriate for applications requiring enhanced accuracy and thermal performance within the same package footprint.

CRCW2010220KFKEF (Vishay Dale): This similar substitute provides ±1% tolerance and 0.75W power rating with AEC-Q200 automotive qualification. ROHS3 compliance and MSL 1 rating confirm regulatory status. Selection is appropriate for automotive-grade applications or when AEC-Q200 certification is a design requirement.

RMCF2010FT220K (Stackpole Electronics Inc): This similar substitute provides ±1% tolerance and 0.75W power rating with AEC-Q200 automotive qualification. ROHS3 compliance and MSL 1 rating confirm regulatory status. Selection is appropriate for automotive-grade applications or when AEC-Q200 certification is a design requirement.

Frequently Asked Questions (FAQ)

Q: Can RC2010JK-07220KL replace RC5025J224CS directly?

A: Yes. RC2010JK-07220KL maintains the ±5% tolerance specification of the original part while providing increased power rating (0.75W vs. 0.667W) and identical package dimensions (2010 / 5025 Metric). All thermal, environmental, and regulatory parameters are equivalent.

Q: What is the difference between upgrade and similar substitutes?

A: Upgrade substitutes (RC2010JK-07220KL, RC2010FK-07220KL) improve tolerance or power rating while maintaining the same base specifications. Similar substitutes (CRCW2010220KFKEF, RMCF2010FT220K) add automotive AEC-Q200 certification in addition to tolerance and power improvements.

Q: Are all substitutes physically compatible with the original PCB footprint?

A: Yes. All substitute parts use the 2010 (5025 Metric) package with identical dimensions (0.197" L x 0.098" W / 5.00mm x 2.50mm). Physical footprint compatibility is confirmed across all alternatives.

Q: Which substitute should be selected for automotive applications?

A: CRCW2010220KFKEF or RMCF2010FT220K are appropriate for automotive applications, as both carry AEC-Q200 qualification. These parts meet automotive-grade reliability and performance standards.

Q: Does tolerance improvement from ±5% to ±1% affect circuit performance?

A: Tolerance improvement reduces resistance value variation. In circuits where precise resistance values are critical for accuracy, ±1% tolerance (RC2010FK-07220KL, CRCW2010220KFKEF, RMCF2010FT220K) provides tighter control compared to ±5% tolerance.

Q: Are all substitutes RoHS3 compliant?

A: Yes. All substitute parts carry ROHS3 Compliant status, confirming regulatory alignment with environmental and hazardous substance restrictions.

Q: What is the significance of MSL 1 (Unlimited) rating?

A: MSL 1 (Unlimited) indicates the component has no moisture sensitivity limitations and requires no special storage or handling precautions. All parts in this comparison carry MSL 1 rating.

Q: Can substitutes be used interchangeably in production?

A: Yes, within the constraints of design specifications. If the original design specifies ±5% tolerance, any substitute with ±5% or tighter tolerance is acceptable. If AEC-Q200 certification is not required, non-automotive substitutes are functionally equivalent.