RC5025J103CS Equivalent & Substitute Parts Reference

Part Overview

The RC5025J103CS is a 10 kOhms ±5% thick film chip resistor manufactured by Samsung Electro-Mechanics, rated at 0.667W (2/3W) in a 2010 (5025 Metric) package. This component is classified as Active product status with 815 pieces currently in stock. The part is ROHS3 compliant and features moisture-resistant construction suitable for industrial and commercial applications operating across -55°C to 155°C temperature range.

Equivalent and substitute parts are identified based on matching electrical specifications (resistance value, tolerance, power rating) and mechanical compatibility (package size, termination type, physical dimensions). Alternative components may offer enhanced performance characteristics such as improved tolerance, higher power ratings, or automotive-grade certifications while maintaining functional interchangeability within the same package footprint.

Key Parameters

Parameter	Value	Substitution Relevance
Resistance	10 kOhms	Critical - must match exactly
Tolerance	±5%	Critical - defines accuracy class
Power Rating	0.667W (2/3W)	Critical - minimum thermal requirement
Package / Case	2010 (5025 Metric)	Critical - physical and electrical compatibility
Composition	Thick Film	Important - determines performance characteristics
Temperature Coefficient	±100ppm/°C	Important - stability across temperature range
Operating Temperature	-55°C ~ 155°C	Important - environmental compatibility
Moisture Sensitivity Level	MSL 1 (Unlimited)	Important - handling and storage requirements
RoHS Status	ROHS3 Compliant	Important - regulatory compliance

Substitute Part Grouping Explanation

Substitute parts are categorized into two groups based on electrical and mechanical compatibility with the RC5025J103CS:

Upgrade Substitutes - Parts with enhanced specifications while maintaining core compatibility:

Same resistance value (10 kOhms) and package (2010)
Higher power rating (0.75W / 3/4W) providing thermal margin
Improved tolerance (±1%) or maintained tolerance (±5%)
Identical temperature coefficient and operating range
Same MSL rating and RoHS compliance status

Similar Substitutes - Parts with equivalent electrical performance and package compatibility:

Identical resistance, tolerance, power rating, and package specifications
May include automotive-grade certifications (AEC-Q200)
Functionally interchangeable with potential enhanced reliability features
Same thermal and environmental specifications

Substitution logic is based strictly on the following allowed parameters: resistance value, tolerance class, power rating, package type, physical dimensions, temperature coefficient, operating temperature range, and regulatory compliance status. All substitute parts maintain the 2010 (5025 Metric) package footprint and 2-termination configuration, ensuring direct PCB compatibility.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op. Temp (°C)	MSL	RoHS	Product Status
RC5025J103CS	Samsung Electro-Mechanics	10 kΩ	±5%	0.667	2010	±100ppm/°C	-55 ~ 155	1	ROHS3	Active
AC2010FK-0710KL	YAGEO	10 kΩ	±1%	0.75	2010	±100ppm/°C	-55 ~ 155	1	ROHS3	Active
AC2010JK-0710KL	YAGEO	10 kΩ	±5%	0.75	2010	±100ppm/°C	-55 ~ 155	1	ROHS3	Active
RC2010FK-0710KL	YAGEO	10 kΩ	±1%	0.75	2010	±100ppm/°C	-55 ~ 155	1	ROHS3	Active
RC2010JK-0710KL	YAGEO	10 kΩ	±5%	0.75	2010	±100ppm/°C	-55 ~ 155	1	ROHS3	Active
CRCW201010K0FKEF	Vishay Dale	10 kΩ	±1%	0.75	2010	±100ppm/°C	-55 ~ 155	1	ROHS3	Active
CRCW201010K0FKTF	Vishay Dale	10 kΩ	±1%	0.75	2010	±100ppm/°C	-55 ~ 155	1	RoHS NC	Active
ERJ-12SF1002U	Panasonic Electronic Components	10 kΩ	±1%	0.75	2010	±100ppm/°C	-55 ~ 155	1	ROHS3	Not For New Designs
RMCF2010FT10K0	Stackpole Electronics Inc	10 kΩ	±1%	0.75	2010	±100ppm/°C	-55 ~ 155	1	ROHS3	Active
RPC2010JT10K0	Stackpole Electronics Inc	10 kΩ	±5%	0.75	2010	±100ppm/°C	-55 ~ 155	1	ROHS3	Active

Engineering Selection Recommendations

Primary Substitutes for Direct Replacement:

AC2010JK-0710KL and RC2010JK-0710KL are functionally equivalent to RC5025J103CS with identical electrical specifications (10 kΩ ±5% tolerance) and improved power rating (0.75W vs. 0.667W). Both parts maintain ROHS3 compliance, MSL 1 rating, and identical operating temperature range. These parts provide thermal margin for applications operating near maximum power dissipation limits.

Substitutes with Enhanced Tolerance:

AC2010FK-0710KL, RC2010FK-0710KL, CRCW201010K0FKEF, RMCF2010FT10K0, and ERJ-12SF1002U offer ±1% tolerance with 0.75W power rating. These parts are suitable for applications requiring tighter resistance accuracy while maintaining package compatibility and thermal performance. All are ROHS3 compliant except CRCW201010K0FKTF.

Compliance Considerations:

CRCW201010K0FKTF is RoHS non-compliant and REACH affected; use only in applications where legacy component specifications are explicitly required. ERJ-12SF1002U carries "Not For New Designs" status; avoid for new product development and use only for legacy system maintenance or repair.

Automotive Applications:

AC2010FK-0710KL, AC2010JK-0710KL, CRCW201010K0FKEF, CRCW201010K0FKTF, ERJ-12SF1002U, RMCF2010FT10K0, and RPC2010JT10K0 include AEC-Q200 automotive qualification. RPC2010JT10K0 additionally features pulse withstanding capability for automotive transient protection circuits.

Inventory and Availability:

RC2010JK-0710KL offers highest inventory availability (50,689 pieces) among ±5% tolerance substitutes. RMCF2010FT10K0 provides maximum stock (105,925 pieces) for ±1% tolerance applications. CRCW201010K0FKEF maintains substantial inventory (33,300 pieces) with automotive certification.

Frequently Asked Questions (FAQ)

Q: Can RC2010JK-0710KL directly replace RC5025J103CS on existing PCBs?

A: Yes. Both parts share identical 2010 (5025 Metric) package dimensions (5.00mm × 2.50mm length and width), 2-termination configuration, and maximum seated height of 0.026" to 0.065". Physical footprint compatibility is confirmed. Electrical specifications match: 10 kΩ ±5% resistance and identical temperature coefficient (±100ppm/°C) and operating range (-55°C to 155°C). The higher power rating (0.75W vs. 0.667W) provides additional thermal margin without affecting circuit operation.

Q: What is the difference between ±5% and ±1% tolerance substitutes?

A: Tolerance defines the maximum deviation of actual resistance from the nominal 10 kΩ value. RC5025J103CS with ±5% tolerance allows actual resistance between 9.5 kΩ and 10.5 kΩ. Substitutes with ±1% tolerance (AC2010FK-0710KL, RC2010FK-0710KL, CRCW201010K0FKEF, RMCF2010FT10K0, ERJ-12SF1002U) restrict actual resistance to 9.9 kΩ to 10.1 kΩ. Select ±1% parts for precision analog circuits, signal conditioning, or applications with tight gain specifications. Use ±5% parts for general-purpose biasing, pull-up/pull-down networks, and non-critical impedance matching.

Q: Are all substitute parts ROHS3 compliant?

A: Nine of ten substitute parts are ROHS3 compliant. CRCW201010K0FKTF is RoHS non-compliant and REACH affected. For new designs and applications subject to environmental regulations, select from ROHS3-compliant alternatives: AC2010FK-0710KL, AC2010JK-0710KL, RC2010FK-0710KL, RC2010JK-0710KL, CRCW201010K0FKEF, ERJ-12SF1002U, RMCF2010FT10K0, or RPC2010JT10K0.

Q: What does "Not For New Designs" status mean for ERJ-12SF1002U?

A: This designation indicates the part is in mature/legacy phase and the manufacturer does not recommend its use in new product development. ERJ-12SF1002U remains available for existing product support, maintenance, and repair applications. For new designs, select from Active-status alternatives such as RMCF2010FT10K0, CRCW201010K0FKEF, or YAGEO RC/AC series parts.

Q: Which substitute offers the best thermal performance?

A: All substitute parts share identical 0.75W power rating, providing 12.5% higher thermal capacity than the original RC5025J103CS (0.667W). Thermal performance is equivalent across all substitutes. Selection should be based on tolerance requirements, automotive certification needs, and product status rather than thermal characteristics.

Q: Can I use automotive-grade (AEC-Q200) parts in non-automotive applications?

A: Yes. AEC-Q200 certification indicates enhanced reliability testing and qualification for automotive environments. These parts exceed standard industrial specifications and are fully compatible with non-automotive applications. AC2010FK-0710KL, AC2010JK-0710KL, CRCW201010K0FKEF, CRCW201010K0FKTF, ERJ-12SF1002U, RMCF2010FT10K0, and RPC2010JT10K0 all carry AEC-Q200 ratings and provide superior reliability margins for demanding industrial, medical, or aerospace applications.

Q: What is the significance of MSL 1 (Unlimited) rating?

A: MSL (Moisture Sensitivity Level) 1 indicates the component has unlimited shelf life and requires no special moisture-control handling during storage or assembly. All listed parts maintain MSL 1 rating, eliminating the need for dry-pack storage, baking procedures, or time-limited floor-life management. This simplifies inventory management and reduces assembly process complexity.

Q: Are there packaging format differences between substitutes?

A: Yes. RC5025J103CS is supplied in cut tape format. Substitutes are available in multiple packaging options: Tape & Reel (TR) for high-volume automated assembly (AC2010FK-0710KL, AC2010JK-0710KL, RC2010JK-0710KL, CRCW201010K0FKEF, CRCW201010K0FKTF, ERJ-12SF1002U, RMCF2010FT10K0, RPC2010JT10K0) and Cut Tape with Digi-Reel option (RC2010FK-0710KL). Select Tape & Reel format for production runs exceeding 1,000 units; use Cut Tape for prototyping, low-volume builds, or mixed-component kits.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message