RC5025F562CS Equivalent & Substitute Parts Reference

Part Overview

The RC5025F562CS is a 5.6 kOhm ±1% thick film chip resistor manufactured by Samsung Electro-Mechanics, rated at 0.667W (2/3W) in a 2010 (5025 Metric) package. This component is classified as Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating (MSL 1). The RC5025F562CS serves applications requiring precision resistive elements with moisture resistance in compact surface-mount form factors. Equivalent and substitute parts are identified to support procurement flexibility, inventory optimization, and supply chain continuity when the primary component becomes unavailable.

Substiute Parts

RC5025F562CS

Samsung Electro-MechanicsIn Stock: 976RC5025F562CS Datasheet

Current PartRFQ

RMCF2010FT5K60

Stackpole Electronics IncIn Stock: 8399RMCF2010FT5K60 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RC5025F562CS are identified based on strict electrical and mechanical parameter matching. The substitution logic requires:

Critical Match Parameters (Non-Negotiable):

• Resistance value: 5.6 kOhms
• Tolerance: ±1%
• Package / Case: 2010 (5025 Metric)
• Composition: Thick Film
• Temperature Coefficient: ±100ppm/°C
• Operating Temperature Range: -55°C ~ 155°C minimum
• RoHS3 Compliance

Acceptable Variation Parameters:

• Power Rating: Substitutes with equal or higher power ratings (0.667W or greater) are acceptable, as higher ratings provide equal or superior thermal performance
• Moisture Sensitivity Level: MSL 1 is maintained across all substitutes
• Packaging Format: Original packaging format (-) may differ from substitute packaging (Tape & Reel) without affecting electrical performance

The RMCF2010FT5K60 qualifies as a direct substitute based on matching all critical parameters while providing a higher power rating (0.75W vs. 0.667W) and automotive-grade qualification (AEC-Q200).

Parameter Comparison

Engineering Selection Recommendations

Primary Component: RC5025F562CS

The RC5025F562CS remains the specified component for original design intent. Active product status and full inventory availability (960 Pcs) support standard procurement channels. RoHS3 compliance and unlimited moisture sensitivity rating (MSL 1) satisfy regulatory and environmental requirements across industrial and commercial applications.

Substitute Component: RMCF2010FT5K60

The RMCF2010FT5K60 qualifies as a direct electrical and mechanical substitute. Selection of this component is appropriate when:

• RC5025F562CS availability is constrained or discontinued
• Supply chain optimization requires alternative sourcing
• Design specifications permit automotive-grade components (AEC-Q200 certification provides enhanced reliability qualification)
• Higher power rating (0.75W vs. 0.667W) provides thermal margin without circuit modification
• Tape & Reel packaging format aligns with high-volume assembly processes

Both components maintain identical electrical performance across the specified operating temperature range (-55°C ~ 155°C) and frequency stability (±100ppm/°C). The 0.002" (0.04mm) height difference is negligible for standard PCB assembly and does not affect board-level clearance or component placement.

Frequently Asked Questions (FAQ)

Q: Can RMCF2010FT5K60 be used as a direct replacement for RC5025F562CS without circuit redesign?

A: Yes. Both components share identical resistance value (5.6 kOhms), tolerance (±1%), package footprint (2010 / 5025 Metric), and operating temperature range (-55°C ~ 155°C). The higher power rating of RMCF2010FT5K60 (0.75W vs. 0.667W) does not require circuit modification and provides additional thermal margin.

Q: What is the significance of the power rating difference between these components?

A: The RC5025F562CS is rated at 0.667W (2/3W), while RMCF2010FT5K60 is rated at 0.75W (3/4W). In substitution, the higher power rating of the RMCF2010FT5K60 is acceptable and advantageous. It indicates superior thermal dissipation capability under identical electrical stress, reducing junction temperature and extending component life. No circuit redesign is required.

Q: Are there packaging format differences between these components?

A: The RC5025F562CS is supplied in standard packaging format (-), while RMCF2010FT5K60 is supplied in Tape & Reel (TR) format. This difference affects procurement and assembly logistics but does not impact electrical performance or PCB-level compatibility. Tape & Reel format is standard for high-volume surface-mount assembly.

Q: Do both components meet the same regulatory and compliance standards?

A: Yes. Both RC5025F562CS and RMCF2010FT5K60 are RoHS3 compliant, REACH unaffected, and classified under ECCN EAR99. Both maintain MSL 1 (unlimited moisture sensitivity), requiring no special handling or storage conditions. Compliance profiles are equivalent.

Q: What is the physical dimension difference, and does it affect PCB layout?

A: The seated height difference is 0.002" (0.04mm): RC5025F562CS at 0.026" (0.66mm) and RMCF2010FT5K60 at 0.028" (0.70mm). This negligible difference does not affect standard PCB assembly, component clearance, or board-level routing. Both components are mechanically compatible with identical 2010 package footprints.

Q: What does AEC-Q200 certification on RMCF2010FT5K60 indicate?

A: AEC-Q200 is an automotive industry qualification standard for passive components. It certifies enhanced reliability through rigorous testing protocols. While RC5025F562CS does not carry this designation, RMCF2010FT5K60's AEC-Q200 rating provides additional qualification assurance for applications requiring automotive-grade component reliability.

Q: Can these components be intermixed in the same production batch?

A: From an electrical and mechanical standpoint, yes. Both components are functionally equivalent and physically compatible. However, procurement and assembly documentation should specify component selection to maintain traceability and supply chain records. Manufacturing processes may require separate handling based on supplier and packaging format.