RC5025F201CS Equivalent & Substitute Parts

Part Overview

The RC5025F201CS is a 200 Ohms ±1% thick film chip resistor manufactured by Samsung Electro-Mechanics in the 2010 (5025 Metric) package format. This component is rated for 0.667W (2/3W) power dissipation and operates across the temperature range of -55°C to 155°C. The part is ROHS3 compliant, moisture resistant, and carries an MSL rating of 1 (Unlimited). The RC5025F201CS maintains active product status with 1065 units currently in stock.

Equivalent and substitute parts are identified to address supply chain requirements, inventory availability, or application-specific performance needs while maintaining electrical and mechanical compatibility within the 2010 package format.

Substiute Parts

RC5025F201CS

Samsung Electro-MechanicsIn Stock: 1079RC5025F201CS Datasheet

Current PartRFQ

AC2010FK-07200RL

YAGEOIn Stock: 5990AC2010FK-07200RL Datasheet

UpgradeRFQ

RC2010FK-07200RL

YAGEOIn Stock: 12215RC2010FK-07200RL Datasheet

UpgradeRFQ

CRCW2010200RFKEF

Vishay DaleIn Stock: 22462CRCW2010200RFKEF Datasheet

SimilarRFQ

RMCF2010FT200R

Stackpole Electronics IncIn Stock: 6648RMCF2010FT200R Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RC5025F201CS is determined by strict adherence to the following electrical and mechanical parameters:

Critical Matching Parameters:

• Resistance value: 200 Ohms
• Tolerance: ±1%
• Package format: 2010 (5025 Metric)
• Composition: Thick Film
• Operating temperature range: -55°C to 155°C
• Temperature coefficient: ±100ppm/°C
• Moisture sensitivity level: 1 (Unlimited)
• RoHS compliance: ROHS3

Allowable Variation:

• Power rating: Substitute parts rated at 0.75W (3/4W) or higher are acceptable for applications requiring the RC5025F201CS, as the higher power rating provides equivalent or superior thermal performance within the same package footprint.

All identified substitute parts meet these criteria and are classified as either upgrade substitutes (higher power rating) or similar substitutes (equivalent specifications with alternative manufacturer sourcing).

Parameter Comparison

Engineering Selection Recommendations

Upgrade Substitutes (Higher Power Rating):

The AC2010FK-07200RL (YAGEO) and RC2010FK-07200RL (YAGEO) are classified as upgrade substitutes. Both parts increase the power rating from 0.667W to 0.75W while maintaining all other electrical and mechanical specifications. These parts are suitable for direct replacement in applications where the RC5025F201CS is specified, with the benefit of improved thermal headroom. The AC2010FK-07200RL carries AEC-Q200 automotive qualification, while the RC2010FK-07200RL does not. Both maintain ROHS3 compliance and MSL 1 rating.

Similar Substitutes (Equivalent Specifications with Alternative Sourcing):

The CRCW2010200RFKEF (Vishay Dale) and RMCF2010FT200R (Stackpole Electronics Inc) are classified as similar substitutes. Both parts provide 0.75W power rating with AEC-Q200 automotive qualification. These components offer alternative manufacturer sourcing while maintaining full electrical and mechanical compatibility. Height specifications for these parts reach 0.028" (0.70mm) compared to 0.026" (0.66mm) for the original part; this difference remains within standard PCB assembly tolerances for the 2010 package format.

All substitute parts maintain active product status, ROHS3 compliance, and MSL 1 (Unlimited) moisture sensitivity rating, ensuring long-term availability and environmental compliance.

Frequently Asked Questions (FAQ)

Q: Can the AC2010FK-07200RL replace the RC5025F201CS in all applications?

A: The AC2010FK-07200RL is electrically and mechanically compatible with the RC5025F201CS. The upgrade from 0.667W to 0.75W power rating does not create incompatibility; it provides additional thermal margin. The AC2010FK-07200RL includes AEC-Q200 automotive qualification, which the original part does not specify. Both parts share identical resistance, tolerance, package format, operating temperature range, and compliance certifications.

Q: What is the difference between upgrade and similar substitutes?

A: Upgrade substitutes (AC2010FK-07200RL and RC2010FK-07200RL) feature increased power ratings (0.75W versus 0.667W) while maintaining all other specifications. Similar substitutes (CRCW2010200RFKEF and RMCF2010FT200R) provide equivalent electrical performance with alternative manufacturer sourcing and include AEC-Q200 automotive qualification. All four parts are functionally interchangeable with the RC5025F201CS.

Q: Are there height differences between the main part and substitutes?

A: The RC5025F201CS has a maximum seated height of 0.026" (0.66mm). The YAGEO substitutes (AC2010FK-07200RL and RC2010FK-07200RL) maintain 0.026" (0.65mm) height. The Vishay Dale CRCW2010200RFKEF and Stackpole RMCF2010FT200R reach 0.028" (0.70mm) maximum height. All height variations remain within standard PCB assembly tolerances for the 2010 package format and do not affect board-level compatibility.

Q: Do all substitute parts meet the same compliance requirements?

A: All substitute parts are ROHS3 compliant and carry MSL 1 (Unlimited) moisture sensitivity ratings, matching the RC5025F201CS. The AC2010FK-07200RL, CRCW2010200RFKEF, and RMCF2010FT200R include AEC-Q200 automotive qualification, which provides additional qualification for automotive applications. The RC2010FK-07200RL does not specify AEC-Q200 rating but maintains all other compliance certifications.

Q: What packaging formats are available for these substitute parts?

A: The RC5025F201CS is supplied in bulk packaging. All identified substitute parts are available in Tape & Reel (TR) format, which is standard for high-volume production and automated assembly processes. Packaging format differences do not affect electrical or mechanical compatibility.

Q: Can substitute parts be mixed within a single assembly?

A: All substitute parts meet identical electrical specifications (200 Ohms ±1%, ±100ppm/°C, -55°C to 155°C operating range) and mechanical requirements (2010 package format). Parts may be used interchangeably within a single assembly without functional impact. However, design documentation and bill of materials should reflect the specific part number used for traceability and future procurement.