RC5025F113CS Equivalent & Substitute Parts Reference

Part Overview

The RC5025F113CS is an 11 kOhms ±1% thick film chip resistor manufactured by Samsung Electro-Mechanics, rated at 0.667W (2/3W) in a 2010 (5025 Metric) package. This component is classified as Active product status with moisture-resistant construction and operates across the temperature range of -55°C to 155°C. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are maintained across the same package footprint and performance envelope.

Substiute Parts

RC5025F113CS

Samsung Electro-MechanicsIn Stock: 962RC5025F113CS Datasheet

Current PartRFQ

CRCW201011K0FKEF

Vishay DaleIn Stock: 8039CRCW201011K0FKEF Datasheet

SimilarRFQ

ERJ-12SF1102U

Panasonic Electronic ComponentsIn Stock: 10816ERJ-12SF1102U Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RC5025F113CS are qualified based on the following criteria:

Electrical Parameters (Must Match):

• Resistance value: 11 kOhms
• Tolerance: ±1%
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C

Mechanical Parameters (Must Match):

• Package / Case: 2010 (5025 Metric)
• Physical dimensions: 0.197" L x 0.098" W (5.00mm x 2.50mm)
• Composition: Thick Film
• Number of terminations: 2

Compliance Parameters (Must Match):

• RoHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Allowable Variation:

• Power rating may exceed the original specification (0.667W minimum required)
• Packaging format may differ (Tape & Reel acceptable for equivalent through-hole or surface-mount applications)
• Product status may vary (Active or Not For New Designs)
• Additional features (such as Automotive AEC-Q200 qualification) are acceptable enhancements

Parameter Comparison

Engineering Selection Recommendations

CRCW201011K0FKEF (Vishay Dale) is the primary substitute for the RC5025F113CS. This part maintains all critical electrical and mechanical parameters while offering a higher power rating of 0.75W. The component is Active product status and carries Automotive AEC-Q200 qualification, providing enhanced reliability documentation. The increased power rating provides additional thermal margin without affecting circuit performance. Packaging is supplied in Tape & Reel format, standard for automated assembly processes.

ERJ-12SF1102U (Panasonic Electronic Components) is a secondary substitute option. This part meets all electrical and mechanical compatibility requirements with identical resistance, tolerance, temperature coefficient, and operating temperature range. The power rating is 0.75W, matching the Vishay alternative. However, this component carries a "Not For New Designs" product status designation, indicating it is in mature or declining production phase. This part is suitable for replacement or legacy system applications where existing inventory or design continuity is required. Automotive AEC-Q200 qualification is included.

Selection Criteria:

• For new designs: CRCW201011K0FKEF is preferred due to Active product status
• For legacy or replacement applications: ERJ-12SF1102U is acceptable
• Both substitutes provide higher power ratings, improving thermal performance
• All three parts are ROHS3 compliant and MSL 1 rated
• Mechanical compatibility is confirmed across all three options

Frequently Asked Questions (FAQ)

Q: Can CRCW201011K0FKEF or ERJ-12SF1102U be used as direct replacements for RC5025F113CS?

A: Yes. Both substitute parts maintain identical resistance (11 kOhms), tolerance (±1%), temperature coefficient (±100ppm/°C), operating temperature range (-55°C ~ 155°C), and package footprint (2010 / 5025 Metric). The higher power ratings (0.75W vs. 0.667W) are compatible with circuit designs specified for the original part.

Q: What is the difference in physical height between the main part and substitutes?

A: The RC5025F113CS has a maximum seated height of 0.026" (0.66mm), while both CRCW201011K0FKEF and ERJ-12SF1102U have a maximum seated height of 0.028" (0.70mm). This 0.002" (0.04mm) difference is within standard PCB assembly tolerances and does not affect board-level compatibility.

Q: Why do the substitute parts have higher power ratings?

A: The substitute parts (CRCW201011K0FKEF and ERJ-12SF1102U) are rated at 0.75W compared to the original 0.667W specification. This higher rating reflects manufacturing process improvements and does not alter electrical performance. The increased power rating provides additional thermal margin and is fully compatible with circuits designed for the original part.

Q: Is ERJ-12SF1102U suitable for new product designs?

A: ERJ-12SF1102U carries a "Not For New Designs" product status. This designation indicates the part is in mature production phase. For new designs, CRCW201011K0FKEF is the recommended choice due to its Active product status. ERJ-12SF1102U is appropriate for replacement, repair, or legacy system applications.

Q: Are all three parts RoHS compliant?

A: Yes. RC5025F113CS, CRCW201011K0FKEF, and ERJ-12SF1102U are all ROHS3 compliant. All three parts have Moisture Sensitivity Level 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.

Q: What is the packaging difference between the main part and substitutes?

A: The RC5025F113CS is specified with a "-" packaging designation. CRCW201011K0FKEF and ERJ-12SF1102U are supplied in Tape & Reel (TR) format, which is standard for automated surface-mount assembly. This packaging format is compatible with modern manufacturing processes and does not affect component performance or compatibility.

Q: Do the substitute parts have automotive qualification?

A: Yes. Both CRCW201011K0FKEF and ERJ-12SF1102U carry Automotive AEC-Q200 qualification, indicating compliance with automotive industry reliability and quality standards. This qualification is an enhancement over the original part specification and is suitable for automotive and high-reliability applications.