Request Quote
(Ships tomorrow)
RC4560ID Equivalent & Substitute Parts
Part Overview
The RC4560ID is a dual-channel audio amplifier integrated circuit manufactured by Texas Instruments in 8-SOIC surface mount packaging. This device is classified as a Last Time Buy product, indicating discontinued production with limited remaining inventory of 1,123 pieces. The RC4560ID operates across a wide supply voltage range of 4V to 32V and is designed for audio amplification applications requiring dual independent circuits. Identification of equivalent and substitute parts is necessary due to the Last Time Buy status, which restricts future availability and may impact long-term production planning for designs incorporating this component.
Substiute Parts
Key Parameters
| Parameter | RC4560ID Value | Unit |
|---|---|---|
| Amplifier Type | Audio | — |
| Number of Circuits | 2 | — |
| Slew Rate | 5.5 | V/µs |
| Gain Bandwidth Product | 15 | MHz |
| Current - Input Bias | 40 | nA |
| Voltage - Input Offset | 500 | µV |
| Current - Supply | 4.3 | mA |
| Current - Output / Channel | 50 | mA |
| Voltage - Supply Span (Min) | 4 | V |
| Voltage - Supply Span (Max) | 32 | V |
| Operating Temperature Range | -40 to 85 | °C |
| Package / Case | 8-SOIC (0.154", 3.90mm Width) | — |
| Mounting Type | Surface Mount | — |
| RoHS Status | ROHS3 Compliant | — |
| Moisture Sensitivity Level | 1 (Unlimited) | — |
Substitute Part Grouping Explanation
Substitution of the RC4560ID is determined by alignment across the following critical parameters: amplifier type classification, number of independent circuits, slew rate performance, gain bandwidth product, input bias current, input offset voltage, output current capability per channel, supply voltage operating range, temperature operating range, and physical package dimensions.
The RC4560ID is an audio amplifier with dual circuits. Substitute parts are grouped into three functional categories based on amplifier type and performance characteristics:
Category 1: Direct Audio Amplifier Substitutes — Parts maintaining audio amplifier classification with comparable slew rate (5V/µs or higher) and gain bandwidth product (15 MHz or higher). These include RC4560IDR and NJM8801E.
Category 2: General Purpose Amplifier Substitutes — Parts classified as general purpose amplifiers with dual circuits in 8-SOIC packaging. These include AS358MTR-E1, BA4560F-E1, BA4560F-E2, and BA4560RF-E2. These parts operate within the RC4560ID supply voltage range but may have different performance characteristics in slew rate and bandwidth.
Category 3: J-FET Amplifier Substitutes — Parts utilizing J-FET input architecture with dual circuits in 8-SOIC packaging. These include LF253DT, LF353DT, TL062CDT, and TL062IDT. These parts offer superior input bias current performance (20 pA to 30 pA) compared to the RC4560ID (40 nA) but operate within compatible supply voltage ranges.
All substitute parts maintain 8-SOIC surface mount packaging, ROHS3 compliance, and operating temperature ranges compatible with or exceeding the RC4560ID specification.
Parameter Comparison
| Part Number | Manufacturer | Amplifier Type | Circuits | Slew Rate (V/µs) | GBW (MHz) | Input Bias (nA/pA) | Input Offset (µV/mV) | Output Current/Ch (mA) | Supply Min (V) | Supply Max (V) | Temp Range (°C) | Package | Status |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| RC4560ID | Texas Instruments | Audio | 2 | 5.5 | 15 | 40 nA | 500 µV | 50 | 4 | 32 | -40 to 85 | 8-SOIC | Last Time Buy |
| RC4560IDR | Texas Instruments | Audio | 2 | 5.5 | 15 | 40 nA | 500 µV | 50 | 4 | 32 | -40 to 85 | 8-SOIC | Active |
| AS358MTR-E1 | Diodes Incorporated | General Purpose | 2 | — | — | 20 nA | 2 mV | 40 | 3 | 36 | -40 to 85 | 8-SOIC | Active |
| BA4560F-E1 | Rohm Semiconductor | General Purpose | 2 | 4 | 10 | 50 nA | 500 µV | 25 | 8 | 30 | -40 to 85 | 8-SOIC | Active |
| BA4560F-E2 | Rohm Semiconductor | General Purpose | 2 | 4 | 10 | 50 nA | 500 µV | 25 | 8 | 30 | -40 to 85 | 8-SOIC | Active |
| BA4560RF-E2 | Rohm Semiconductor | General Purpose | 2 | 4 | 4 | 50 nA | 500 µV | 25 | 8 | 30 | -40 to 105 | 8-SOIC | Active |
| LF253DT | STMicroelectronics | J-FET | 2 | 16 | 4 | 20 pA | 3 mV | 40 | 6 | 36 | -40 to 105 | 8-SOIC | Active |
| LF353DT | STMicroelectronics | J-FET | 2 | 16 | 4 | 20 pA | 3 mV | 40 | 6 | 36 | 0 to 70 | 8-SOIC | Active |
| NJM8801E | Nisshinbo Micro Devices Inc. | Audio | 2 | 5 | 15 | 100 nA | 300 µV | — | 4 | 36 | -40 to 85 | 8-SOIC | Active |
| TL062CDT | STMicroelectronics | J-FET | 2 | 3.5 | 1 | 30 pA | 3 mV | 20 | 6 | 36 | 0 to 70 | 8-SOIC | Active |
| TL062IDT | STMicroelectronics | J-FET | 2 | 3.5 | 1 | 30 pA | 3 mV | 20 | 6 | 36 | -40 to 105 | 8-SOIC | Active |
Engineering Selection Recommendations
RC4560IDR is the primary recommended substitute for RC4560ID. Both parts are manufactured by Texas Instruments with identical electrical specifications, including 5.5V/µs slew rate, 15 MHz gain bandwidth product, 40 nA input bias current, and 50 mA output current per channel. RC4560IDR maintains the same 4V to 32V supply voltage range and -40°C to 85°C operating temperature range. The distinction is packaging format: RC4560IDR is supplied in Cut Tape and Digi-Reel format with 6,205 pieces in stock, compared to RC4560ID in Tube format with 1,123 pieces. RC4560IDR carries Active product status, ensuring continued availability and manufacturing support.
NJM8801E is an alternative audio amplifier substitute manufactured by Nisshinbo Micro Devices Inc. This part maintains audio amplifier classification with 5V/µs slew rate and 15 MHz gain bandwidth product, matching the RC4560ID performance envelope. NJM8801E operates across 4V to 36V supply range, exceeding the RC4560ID maximum of 32V. Input offset voltage is superior at 300 µV compared to 500 µV. NJM8801E carries Active product status with 2,997 pieces in inventory. Moisture sensitivity level is MSL 2 (1 Year) compared to RC4560ID MSL 1 (Unlimited).
BA4560RF-E2 is a general purpose amplifier substitute from Rohm Semiconductor with extended operating temperature range of -40°C to 105°C, exceeding RC4560ID specification. This part maintains 50 nA input bias current and 500 µV input offset voltage matching the RC4560ID. Supply voltage range is 8V to 30V, which is narrower than RC4560ID (4V to 32V). Slew rate is 4V/µs and gain bandwidth product is 4 MHz, both lower than RC4560ID. Output current per channel is 25 mA, lower than RC4560ID 50 mA. BA4560RF-E2 carries Active product status with 330,900 pieces in inventory.
LF253DT and LF253DT are J-FET amplifier substitutes from STMicroelectronics offering superior input bias current performance (20 pA) compared to RC4560ID (40 nA). These parts provide 16V/µs slew rate, exceeding RC4560ID. Supply voltage range is 6V to 36V. LF253DT operates across -40°C to 105°C, while LF353DT is limited to 0°C to 70°C. Gain bandwidth product is 4 MHz, lower than RC4560ID 15 MHz. Both carry Active product status and ROHS3 compliance.
TL062CDT and TL062IDT are low-power J-FET amplifier substitutes from STMicroelectronics with 30 pA input bias current and 200 µA supply current per dual channel. These parts are suitable for low-power applications but offer reduced slew rate (3.5V/µs) and gain bandwidth product (1 MHz) compared to RC4560ID. TL062CDT operates 0°C to 70°C, while TL062IDT extends to -40°C to 105°C. Both carry Active product status.
AS358MTR-E1 is a general purpose amplifier from Diodes Incorporated with 20 nA input bias current and extended supply voltage range of 3V to 36V. This part offers lower supply current (700 µA for dual channels) compared to RC4560ID. Slew rate and gain bandwidth product are not specified. AS358MTR-E1 carries Active product status with 264,200 pieces in inventory.
BA4560F-E1 and BA4560F-E2 are general purpose amplifier variants from Rohm Semiconductor with identical electrical specifications. Both operate 8V to 30V supply range with 4V/µs slew rate and 10 MHz gain bandwidth product. Output current per channel is 25 mA. BA4560F-E1 and BA4560F-E2 carry Active product status with 2,212 and 156,523 pieces in inventory respectively.
All recommended substitutes maintain ROHS3 compliance and 8-SOIC surface mount packaging compatible with RC4560ID PCB layouts.
Frequently Asked Questions (FAQ)
Q: Can RC4560IDR be used as a direct replacement for RC4560ID?
A: Yes. RC4560IDR is electrically and functionally identical to RC4560ID. Both are manufactured by Texas Instruments with identical specifications for slew rate (5.5V/µs), gain bandwidth product (15 MHz), input bias current (40 nA), input offset voltage (500 µV), output current per channel (50 mA), and supply voltage range (4V to 32V). The only difference is packaging format: RC4560IDR is supplied in Cut Tape and Digi-Reel format, while RC4560ID is supplied in Tube format. RC4560IDR carries Active product status with significantly higher inventory availability.
Q: What is the primary difference between audio amplifier and general purpose amplifier substitutes?
A: Audio amplifiers are optimized for audio frequency applications with specifications emphasizing slew rate and gain bandwidth product performance. The RC4560ID is classified as an audio amplifier with 5.5V/µs slew rate and 15 MHz gain bandwidth product. General purpose amplifiers such as AS358MTR-E1 and BA4560 series are designed for broader application ranges and may have different performance characteristics. General purpose substitutes typically have lower slew rates and gain bandwidth products but may offer advantages in supply voltage range or input bias current.
Q: Are J-FET amplifier substitutes compatible with RC4560ID applications?
A: J-FET amplifier substitutes such as LF253DT, LF353DT, TL062CDT, and TL062IDT offer superior input bias current performance (20 to 30 pA) compared to RC4560ID (40 nA). These parts maintain dual-circuit configuration and 8-SOIC packaging. However, J-FET substitutes have lower gain bandwidth products (1 to 4 MHz) compared to RC4560ID (15 MHz). J-FET substitutes are suitable for applications prioritizing low input bias current and high input impedance. Applications requiring high-frequency performance or high slew rate should use audio amplifier substitutes such as RC4560IDR or NJM8801E.
Q: What supply voltage range considerations apply to substitute selection?
A: RC4560ID operates across 4V to 32V supply range. Substitute parts have varying supply voltage specifications. RC4560IDR maintains identical 4V to 32V range. NJM8801E extends to 4V to 36V. BA4560 series parts operate 8V to 30V, which is narrower than RC4560ID. AS358MTR-E1 operates 3V to 36V, extending below RC4560ID minimum. LF253DT and LF353DT operate 6V to 36V. TL062 series parts operate 6V to 36V. Applications requiring operation below 6V must use RC4560IDR, NJM8801E, or AS358MTR-E1. Applications requiring operation above 32V must use NJM8801E or AS358MTR-E1.
Q: What are the temperature operating range considerations?
A: RC4560ID operates -40°C to 85°C. Most substitute parts maintain this range or extend it. RC4560IDR is identical at -40°C to 85°C. NJM8801E matches at -40°C to 85°C. BA4560RF-E2 extends to -40°C to 105°C. LF253DT extends to -40°C to 105°C. LF353DT is limited to 0°C to 70°C. TL062CDT is limited to 0°C to 70°C. TL062IDT extends to -40°C to 105°C. Applications requiring operation above 85°C should use BA4560RF-E2, LF253DT, or TL062IDT. Applications requiring operation below 0°C should avoid LF353DT and TL062CDT.
Q: How does output current capability affect substitute selection?
A: RC4560ID provides 50 mA output current per channel. RC4560IDR maintains 50 mA per channel. NJM8801E does not specify output current. AS358MTR-E1 provides 40 mA per channel. BA4560 series parts provide 25 mA per channel. LF253DT and LF353DT provide 40 mA per channel. TL062 series parts provide 20 mA per channel. Applications requiring 50 mA output current per channel must use RC4560IDR. Applications with lower output current requirements can use BA4560 series or TL062 series parts.
Q: What is the significance of moisture sensitivity level (MSL) in substitute selection?
A: RC4560ID carries MSL 1 (Unlimited), indicating no moisture sensitivity restrictions. RC4560IDR maintains MSL 1. Most substitute parts carry MSL 1 except AS358MTR-E1, which carries MSL 3 (168 Hours). MSL 3 requires baking before reflow soldering if the component has been exposed to moisture for more than 168 hours. Applications with strict manufacturing timelines should prioritize MSL 1 parts.
Q: Can multiple substitute parts be used interchangeably in the same design?
A: No. Each substitute part has distinct electrical specifications. Designs must be validated for the specific substitute part selected. RC4560IDR is the only true drop-in replacement with identical specifications. Other substitutes require circuit analysis to confirm compatibility with application requirements for slew rate, gain bandwidth product, input bias current, output current, and supply voltage range.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts