RC4559D Equivalent & Substitute Parts

Part Overview

The RC4559D is a general-purpose operational amplifier manufactured by Texas Instruments, configured as a dual-circuit (2-channel) device in an 8-SOIC surface-mount package. This component is classified as a Last Time Buy product, indicating discontinued production with limited inventory availability. The RC4559D operates across a supply voltage range of 10V to 30V and is suitable for general-purpose amplification applications requiring moderate bandwidth and slew rate performance. Due to its Last Time Buy status, identifying equivalent and substitute parts with compatible electrical and mechanical specifications is essential for design continuity and long-term component sourcing.

Key Parameters

Parameter	Value
Manufacturer	Texas Instruments
Part Number	RC4559D
Category	Linear, Amplifiers
Amplifier Type	General Purpose
Number of Circuits	2
Package / Case	8-SOIC (0.154", 3.90mm Width)
Mounting Type	Surface Mount
Slew Rate	2V/µs
Gain Bandwidth Product	4 MHz
Current - Input Bias	40 nA
Voltage - Input Offset	2 mV
Current - Supply	3.3mA (x2 Channels)
Current - Output / Channel	10 mA
Voltage - Supply Span (Min)	10 V
Voltage - Supply Span (Max)	30 V
Operating Temperature	0°C ~ 70°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Product Status	Last Time Buy

Substitute Part Grouping Explanation

Substitute parts for the RC4559D are grouped based on strict compatibility criteria derived from the provided electrical and mechanical parameters. The primary substitution logic is based on the following key parameters:

Mechanical Compatibility: All substitute parts maintain the 8-SOIC (0.154", 3.90mm Width) surface-mount package, ensuring direct pin-compatible replacement without PCB redesign.

Electrical Compatibility: Substitute parts are selected based on matching or exceeding the following electrical specifications:

Number of Circuits: 2 (dual-channel configuration)
Supply Voltage Range: Minimum 10V, Maximum 30V or greater
Operating Temperature Range: 0°C to 70°C or extended range
Current Output per Channel: 10 mA or greater
Input Bias Current: 40 nA or lower
Input Offset Voltage: 2 mV or lower

Compliance and Status: All substitute parts maintain ROHS3 compliance and MSL 1 rating. Active product status substitutes are prioritized over Last Time Buy components to ensure long-term availability.

Substitutes are further categorized by amplifier type (General Purpose vs. J-FET) and packaging format (Tube, Tape & Reel, Cut Tape & Digi-Reel), allowing selection based on procurement and assembly requirements.

Parameter Comparison

Part Number	Manufacturer	Amplifier Type	Slew Rate (V/µs)	Gain Bandwidth Product (MHz)	Input Bias Current (nA/pA)	Input Offset Voltage	Supply Current (mA)	Output Current / Channel (mA)	Supply Voltage Min (V)	Supply Voltage Max (V)	Operating Temperature	Packaging	Product Status
RC4559D	Texas Instruments	General Purpose	2	4	40 nA	2 mV	3.3	10	10	30	0°C ~ 70°C	Tube	Last Time Buy
RC4559DR	Texas Instruments	General Purpose	2	4	40 nA	2 mV	3.3	10	10	30	0°C ~ 70°C	Tape & Reel	Active
AD712JRZ-REEL	Analog Devices Inc.	J-FET	20	4	25 pA	300 µV	5	25	9	36	0°C ~ 70°C	Cut Tape & Digi-Reel	Active
AD712KRZ	Analog Devices Inc.	J-FET	20	4	25 pA	300 µV	5	25	9	36	0°C ~ 70°C	Tube	Active
AD712KRZ-REEL	Analog Devices Inc.	J-FET	20	4	25 pA	300 µV	5	25	9	36	0°C ~ 70°C	Tape & Reel	Active
AD712KRZ-REEL7	Analog Devices Inc.	J-FET	20	4	25 pA	300 µV	5	25	9	36	0°C ~ 70°C	Cut Tape & Digi-Reel	Active
AD712TRZ-EP	Analog Devices Inc.	J-FET	20	3	25 pA	300 µV	5	25	9	36	-55°C ~ 125°C	Tube	Active
AD712TRZ-EP-R7	Analog Devices Inc.	J-FET	20	3	25 pA	300 µV	5	25	9	36	-55°C ~ 125°C	Tape & Reel	Active
AD8672ARZ	Analog Devices Inc.	General Purpose	4	10	3 nA	20 µV	3	20	10	36	-40°C ~ 125°C	Tube	Active
AD8672ARZ-REEL	Analog Devices Inc.	General Purpose	4	10	3 nA	20 µV	3	20	10	36	-40°C ~ 125°C	Cut Tape & Digi-Reel	Active
AD8672ARZ-REEL7	Analog Devices Inc.	General Purpose	4	10	3 nA	20 µV	3	20	10	36	-40°C ~ 125°C	Cut Tape & Digi-Reel	Active

Engineering Selection Recommendations

Direct Replacement (Identical Electrical Specifications): The RC4559DR is the primary direct substitute for RC4559D. Both components are manufactured by Texas Instruments with identical electrical specifications, including 2V/µs slew rate, 4 MHz gain bandwidth product, 40 nA input bias current, and 2 mV input offset voltage. The RC4559DR differs only in packaging format (Tape & Reel vs. Tube) and product status (Active vs. Last Time Buy). The RC4559DR is recommended for applications requiring identical performance characteristics with assured long-term availability.

General Purpose Amplifier Substitutes with Enhanced Performance: The AD8672ARZ, AD8672ARZ-REEL, and AD8672ARZ-REEL7 are general-purpose amplifiers from Analog Devices Inc. that exceed RC4559D specifications in multiple parameters: 4V/µs slew rate (vs. 2V/µs), 10 MHz gain bandwidth product (vs. 4 MHz), 3 nA input bias current (vs. 40 nA), and 20 µV input offset voltage (vs. 2 mV). These devices maintain the same 8-SOIC package and support extended operating temperature ranges (-40°C to 125°C). The AD8672 series is suitable for applications where improved performance margins and wider temperature operation are beneficial.

J-FET Amplifier Substitutes: The AD712 series (AD712JRZ-REEL, AD712KRZ, AD712KRZ-REEL, AD712KRZ-REEL7, AD712TRZ-EP, AD712TRZ-EP-R7) from Analog Devices Inc. are J-FET input amplifiers with significantly lower input bias current (25 pA vs. 40 nA) and superior slew rate (20V/µs vs. 2V/µs). These devices support extended supply voltage ranges (9V to 36V) and are available in multiple packaging formats. The AD712TRZ-EP and AD712TRZ-EP-R7 variants support extended operating temperature ranges (-55°C to 125°C). J-FET substitutes are appropriate for applications requiring ultra-low input bias current or high-speed signal processing.

Packaging and Procurement Considerations: All substitute parts maintain the 8-SOIC surface-mount package, ensuring mechanical compatibility. Selection between Tube, Tape & Reel, and Cut Tape & Digi-Reel packaging depends on assembly process requirements and procurement volume. Active product status substitutes ensure continued availability and supply chain stability compared to the Last Time Buy RC4559D.

Compliance and Regulatory: All substitute parts maintain ROHS3 compliance and MSL 1 (Unlimited) moisture sensitivity rating, matching the RC4559D specifications. REACH compliance status is consistent across all listed substitutes.

Frequently Asked Questions (FAQ)

Q: Can RC4559DR be used as a direct replacement for RC4559D? A: Yes. RC4559DR is electrically and mechanically identical to RC4559D. The only differences are packaging format (Tape & Reel vs. Tube) and product status (Active vs. Last Time Buy). Both components share identical electrical specifications and the same 8-SOIC package footprint.

Q: What is the primary advantage of AD712 series substitutes over RC4559D? A: The AD712 series offers significantly lower input bias current (25 pA vs. 40 nA) and higher slew rate (20V/µs vs. 2V/µs). These characteristics make AD712 devices suitable for applications requiring ultra-low input current or faster signal response. However, AD712 devices are J-FET input amplifiers, which may exhibit different noise characteristics compared to the general-purpose RC4559D.

Q: Are AD8672 devices suitable replacements for RC4559D? A: AD8672 devices are mechanically compatible and exceed RC4559D electrical specifications in slew rate (4V/µs vs. 2V/µs), gain bandwidth product (10 MHz vs. 4 MHz), and input bias current (3 nA vs. 40 nA). AD8672 devices support extended operating temperature ranges (-40°C to 125°C vs. 0°C to 70°C). These devices are suitable for applications where improved performance and wider temperature operation are required.

Q: What packaging options are available for RC4559D substitutes? A: Substitute parts are available in three packaging formats: Tube, Tape & Reel (TR), and Cut Tape & Digi-Reel. All maintain the 8-SOIC (0.154", 3.90mm Width) surface-mount package. Packaging selection depends on assembly process requirements and procurement volume.

Q: Do all substitute parts support the same supply voltage range as RC4559D? A: RC4559D supports 10V to 30V supply range. Most AD712 and AD8672 substitutes support 9V to 36V range, providing extended voltage operation capability. Verify specific supply voltage requirements for your application before selection.

Q: What is the operating temperature range difference between RC4559D and its substitutes? A: RC4559D operates from 0°C to 70°C. AD712 standard variants (AD712JRZ-REEL, AD712KRZ, AD712KRZ-REEL, AD712KRZ-REEL7) maintain the same 0°C to 70°C range. AD712TRZ-EP and AD712TRZ-EP-R7 variants support extended range (-55°C to 125°C). AD8672 series supports -40°C to 125°C. Select based on your application's temperature requirements.

Q: Are all substitute parts ROHS3 compliant? A: Yes. All listed substitute parts maintain ROHS3 compliance and MSL 1 (Unlimited) moisture sensitivity rating, matching RC4559D specifications.

Q: Why is RC4559D classified as Last Time Buy? A: Last Time Buy status indicates that Texas Instruments has discontinued production of this component. Existing inventory is available, but no future production is planned. This classification makes identifying active substitute parts essential for long-term design continuity.

Q: Can I mix different substitute parts in the same design? A: All substitute parts are pin-compatible within the 8-SOIC package. However, electrical performance differences between general-purpose (RC4559D, RC4559DR, AD8672) and J-FET (AD712) amplifiers may affect circuit behavior. Maintain consistency within a single design unless performance differences are intentional and verified.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message