RC3225J202CS Equivalent & Substitute Parts Reference

Part Overview

The RC3225J202CS is a 2 kOhms ±5% thick film chip resistor manufactured by Samsung Electro-Mechanics in the 1210 (3225 Metric) package format. This component delivers 0.333W (1/3W) power dissipation with moisture-resistant construction and operates across the temperature range of -55°C to 155°C. The part maintains Active product status with ROHS3 compliance and unlimited moisture sensitivity level (MSL 1).

Equivalent and substitute parts are necessary when the original RC3225J202CS becomes unavailable, when design requirements demand enhanced specifications such as improved tolerance or higher power ratings, or when supply chain optimization requires alternative qualified sources from different manufacturers.

Key Parameters

Parameter	Value
Resistance	2 kOhms
Tolerance	±5%
Power Rating	0.333W (1/3W)
Package / Case	1210 (3225 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C to 155°C
Moisture Sensitivity Level	1 (Unlimited)
RoHS Status	ROHS3 Compliant
Number of Terminations	2

Substitute Part Grouping Explanation

Substitution compatibility for the RC3225J202CS is determined by strict adherence to the following electrical and mechanical parameters:

Primary Substitution Criteria:

Resistance value: 2 kOhms (exact match required)
Package format: 1210 (3225 Metric) (exact match required)
Composition: Thick Film (exact match required)
Temperature range: -55°C to 155°C minimum (equal or superior)
Moisture Sensitivity Level: 1 (Unlimited) minimum
RoHS3 compliance (required for regulatory alignment)

Secondary Compatibility Parameters:

Tolerance: ±5% or better (tighter tolerance acceptable)
Power rating: 0.333W minimum (higher ratings acceptable with dimensional verification)
Temperature coefficient: ±100ppm/°C or better

Substitute parts are grouped into two categories:

Upgrade Substitutes provide enhanced specifications while maintaining full mechanical and electrical compatibility. These parts exceed or match all primary criteria and offer improvements in tolerance, power rating, or automotive qualification (AEC-Q200).

Similar Substitutes maintain identical core specifications with minor variations in power rating or specialized features. These parts are functionally equivalent for standard applications.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (Watts)	Package	Temp Coeff	Operating Temp	AEC-Q200	Product Status
RC3225J202CS	Samsung Electro-Mechanics	2 kOhms	±5%	0.333W	1210	±100ppm/°C	-55°C ~ 155°C	No	Active
AC1210FR-072KL	YAGEO	2 kOhms	±1%	0.5W	1210	±100ppm/°C	-55°C ~ 155°C	Yes	Active
AC1210JR-072KL	YAGEO	2 kOhms	±5%	0.5W	1210	±100ppm/°C	-55°C ~ 155°C	Yes	Active
ERJ-14NF2001U	Panasonic Electronic Components	2 kOhms	±1%	0.5W	1210	±100ppm/°C	-55°C ~ 155°C	Yes	Not For New Designs
KTR25JZPF2001	Rohm Semiconductor	2 kOhms	±1%	0.333W	1210	±100ppm/°C	-55°C ~ 155°C	Yes	Active
RC1210FR-072KL	YAGEO	2 kOhms	±1%	0.5W	1210	±100ppm/°C	-55°C ~ 155°C	No	Active
RC1210JR-072KL	YAGEO	2 kOhms	±5%	0.5W	1210	±100ppm/°C	-55°C ~ 155°C	No	Active
RMCF1210FT2K00	Stackpole Electronics Inc	2 kOhms	±1%	0.5W	1210	±100ppm/°C	-55°C ~ 155°C	Yes	Active
CRCW12102K00FKEA	Vishay Dale	2 kOhms	±1%	0.5W	1210	±100ppm/°C	-55°C ~ 155°C	Yes	Active
CRCW12102K00FKEAHP	Vishay Dale	2 kOhms	±1%	0.75W	1210	±100ppm/°C	-55°C ~ 155°C	Yes	Active

Engineering Selection Recommendations

For Direct Replacement (Identical Specifications):

RC1210JR-072KL from YAGEO provides direct functional equivalence with identical 2 kOhms ±5% tolerance and 0.333W power rating in the 1210 package. This part maintains Active product status and ROHS3 compliance. Selection of this part requires no circuit re-evaluation.

For Improved Tolerance Applications:

AC1210JR-072KL (YAGEO), RC1210FR-072KL (YAGEO), KTR25JZPF2001 (Rohm Semiconductor), RMCF1210FT2K00 (Stackpole Electronics), CRCW12102K00FKEA (Vishay Dale), and AC1210FR-072KL (YAGEO) all provide ±1% tolerance improvement over the original ±5% specification. These parts maintain 2 kOhms resistance and 1210 package compatibility. KTR25JZPF2001 preserves the original 0.333W power rating while others provide 0.5W capability.

For Automotive-Qualified Applications:

AC1210FR-072KL, AC1210JR-072KL, ERJ-14NF2001U, KTR25JZPF2001, RMCF1210FT2K00, CRCW12102K00FKEA, and CRCW12102K00FKEAHP all carry AEC-Q200 automotive qualification. Selection depends on tolerance and power requirements.

For Active Product Status Priority:

ERJ-14NF2001U carries "Not For New Designs" status and should be avoided in new circuit development. All other listed substitutes maintain Active product status.

For Enhanced Power Dissipation:

CRCW12102K00FKEAHP provides 0.75W (3/4W) power rating with pulse-withstanding capability, suitable for applications requiring higher transient energy absorption while maintaining 2 kOhms ±1% specification in the 1210 package.

Frequently Asked Questions (FAQ)

Q: Can I use a substitute part with higher power rating than the original RC3225J202CS?

A: Yes. The RC3225J202CS operates at 0.333W. Substitute parts rated at 0.5W or 0.75W are mechanically and electrically compatible within the 1210 package format. Higher power ratings do not degrade circuit performance and provide additional thermal margin. Verify that PCB layout and thermal management accommodate the substitute part's physical dimensions.

Q: What is the difference between ±5% and ±1% tolerance, and does it affect substitution?

A: Tolerance specifies the maximum deviation from the nominal 2 kOhms resistance value. ±5% allows deviation between 1.9 kOhms and 2.1 kOhms. ±1% allows deviation between 1.98 kOhms and 2.02 kOhms. Substituting a ±1% part for a ±5% specification improves circuit accuracy and is fully compatible. Substituting a ±5% part for a ±1% specification is not recommended without circuit re-evaluation.

Q: Are YAGEO RC series parts (RC1210FR-072KL, RC1210JR-072KL) equivalent to Samsung RC3225J202CS?

A: Yes. Both YAGEO RC series parts maintain identical 2 kOhms resistance, 1210 package format, thick film composition, and -55°C to 155°C operating range. RC1210JR-072KL matches the original ±5% tolerance exactly. RC1210FR-072KL provides improved ±1% tolerance. Both are ROHS3 compliant and carry unlimited moisture sensitivity level.

Q: What does AEC-Q200 qualification mean for resistor substitution?

A: AEC-Q200 is an automotive industry standard qualification demonstrating that the component meets stringent reliability, temperature cycling, and performance requirements for automotive applications. Parts carrying AEC-Q200 (AC1210FR-072KL, AC1210JR-072KL, ERJ-14NF2001U, KTR25JZPF2001, RMCF1210FT2K00, CRCW12102K00FKEA, CRCW12102K00FKEAHP) are suitable for automotive circuits. The original RC3225J202CS does not carry this qualification.

Q: Why is ERJ-14NF2001U marked "Not For New Designs"?

A: This status indicates that Panasonic has discontinued active development and recommends against using this part in new circuit designs. While the part remains functionally compatible and is in stock, alternative active-status parts should be prioritized for new projects to ensure long-term supply availability and manufacturer support.

Q: Can I substitute CRCW12102K00FKEAHP (0.75W) for RC3225J202CS (0.333W) without circuit modification?

A: Yes. The CRCW12102K00FKEAHP maintains identical 2 kOhms resistance, ±1% tolerance, and 1210 package format. The higher 0.75W power rating provides additional thermal capability and does not require circuit modification. Verify that the substitute part's physical dimensions (0.126" L x 0.098" W x 0.028" H maximum) fit within the PCB layout constraints of the original 0.333W part.

Q: What packaging formats are available for these 2 kOhms 1210 resistors?

A: Substitute parts are available in Tape & Reel (TR) and Cut Tape (CT) & Digi-Reel® formats. Tape & Reel packaging is standard for automated assembly processes. Cut Tape & Digi-Reel® format is suitable for manual assembly or lower-volume applications. Verify packaging compatibility with your procurement and assembly processes before part selection.

Q: Are all listed substitute parts ROHS3 compliant?

A: Yes. All substitute parts listed (AC1210FR-072KL, AC1210JR-072KL, ERJ-14NF2001U, KTR25JZPF2001, RC1210FR-072KL, RC1210JR-072KL, RMCF1210FT2K00, CRCW12102K00FKEA, CRCW12102K00FKEAHP) maintain ROHS3 compliance, matching the original RC3225J202CS specification. All parts carry unlimited moisture sensitivity level (MSL 1).

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message