RC3225F8060CS Equivalent & Substitute Parts Reference

Part Overview

The RC3225F8060CS is a 806 Ohm ±1% thick film chip resistor manufactured by Samsung Electro-Mechanics, rated at 0.333W (1/3W) power dissipation in a 1210 (3225 Metric) surface mount package. This component is classified as Active product status with full ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1).

Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are maintained across the 1210 package format, resistance value, and tolerance class. Alternative sources become necessary due to supply chain considerations, inventory availability, or specific application requirements such as automotive qualification or enhanced pulse withstanding capabilities.

Substiute Parts

RC3225F8060CS

Samsung Electro-MechanicsIn Stock: 1009RC3225F8060CS Datasheet

Current PartRFQ

ERJ-14NF8060U

Panasonic Electronic ComponentsIn Stock: 16357ERJ-14NF8060U Datasheet

SimilarRFQ

ERJ-P14F8060U

Panasonic Electronic ComponentsIn Stock: 4413ERJ-P14F8060U Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RC3225F8060CS is determined by strict adherence to the following criteria:

Mandatory Matching Parameters:

• Resistance value: 806 Ohms
• Tolerance: ±1%
• Package format: 1210 (3225 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Number of terminations: 2
• RoHS3 compliance status
• MSL rating: 1 (Unlimited)

Allowable Variation:

• Power rating: Substitute parts rated at 0.5W (1/2W) or higher are acceptable, as they provide equal or greater power dissipation capability within the same package footprint and thermal characteristics.

Identified Substitute Parts:

1. ERJ-14NF8060U (Panasonic Electronic Components) – 0.5W rated, automotive AEC-Q200 qualified, thick film composition, identical dimensional and electrical specifications except power rating elevation.

2. ERJ-P14F8060U (Panasonic Electronic Components) – 0.5W rated, automotive AEC-Q200 qualified with pulse withstanding capability, thick film composition, identical dimensional and electrical specifications except power rating elevation and enhanced transient performance.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection – RC3225F8060CS: Select the original Samsung Electro-Mechanics RC3225F8060CS when the application does not require automotive qualification and the specified 0.333W power rating is sufficient for the circuit design. This part maintains Active product status with full manufacturing support and standard industrial compliance certifications.

Secondary Selection – ERJ-P14F8060U: Select the Panasonic ERJ-P14F8060U when the application requires automotive-grade components with AEC-Q200 qualification or when enhanced pulse withstanding capability is necessary for transient protection. This part is Active status with elevated power rating (0.5W) providing additional thermal margin. The pulse withstanding feature addresses applications subject to voltage spikes or current surges.

Tertiary Selection – ERJ-14NF8060U: The Panasonic ERJ-14NF8060U is electrically and mechanically equivalent to ERJ-P14F8060U with identical AEC-Q200 automotive qualification and 0.5W power rating. However, this part is classified as Not For New Designs, limiting its suitability for new product development. Use only when existing inventory or legacy system requirements mandate this specific part number.

Dimensional Compatibility Note: Substitute parts ERJ-14NF8060U and ERJ-P14F8060U exhibit minor dimensional variations in width (0.098" vs. 0.100") and seated height (0.028" vs. 0.026"). These variations remain within standard PCB layout tolerances for 1210 package footprints and do not affect electrical performance or mechanical fit in standard 1210 land patterns.

Frequently Asked Questions (FAQ)

Q1: Can ERJ-14NF8060U or ERJ-P14F8060U be used as direct replacements for RC3225F8060CS?

A: Yes, both Panasonic parts are direct electrical and mechanical substitutes. All three components share identical resistance (806 Ohms), tolerance (±1%), package format (1210), composition (thick film), temperature coefficient (±100ppm/°C), and operating temperature range (-55°C ~ 155°C). The substitute parts feature elevated power ratings (0.5W vs. 0.333W), which provides additional thermal capability without affecting circuit performance. Minor dimensional variations (width and height) are within standard 1210 package tolerances and do not impact PCB compatibility.

Q2: What is the difference between ERJ-14NF8060U and ERJ-P14F8060U?

A: Both parts are manufactured by Panasonic with identical electrical specifications, package format, and AEC-Q200 automotive qualification. The primary distinction is product status: ERJ-P14F8060U is Active, while ERJ-14NF8060U is Not For New Designs. Additionally, ERJ-P14F8060U includes pulse withstanding capability for enhanced transient protection. For new designs, ERJ-P14F8060U is the preferred Panasonic option.

Q3: Why do the substitute parts have higher power ratings (0.5W vs. 0.333W)?

A: Higher power ratings in the same package footprint indicate improved thermal design or material composition. A 0.5W rated resistor in a 1210 package can safely dissipate more power than a 0.333W rated resistor in the same package. This does not create compatibility issues; the circuit will operate identically, with the substitute part providing additional thermal margin and reliability headroom.

Q4: Are there compliance or certification differences between these parts?

A: All three parts are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating. The Panasonic substitutes (ERJ-14NF8060U and ERJ-P14F8060U) carry AEC-Q200 automotive qualification, which the Samsung part does not specify. If automotive qualification is required, select a Panasonic substitute. If automotive qualification is not required, the Samsung part is fully compliant for industrial and commercial applications.

Q5: Can I use these parts interchangeably in existing designs?

A: Yes, for existing designs currently using RC3225F8060CS, both Panasonic substitutes are compatible. The identical electrical parameters, package footprint, and thermal characteristics ensure drop-in compatibility. The elevated power rating and automotive qualification of the Panasonic parts provide equal or enhanced performance. No circuit redesign or PCB layout modification is required.

Q6: What is the significance of "Not For New Designs" status for ERJ-14NF8060U?

A: This designation indicates that Panasonic is not actively promoting this part for new product development. While the part remains available and functional, ERJ-P14F8060U is the recommended Panasonic alternative for new designs. Use ERJ-14NF8060U only when legacy system support or existing inventory constraints require this specific part number.

Q7: How do dimensional variations affect PCB layout?

A: The substitute parts exhibit minor width (0.098" vs. 0.100") and height (0.028" vs. 0.026") differences. These variations are within the standard tolerance envelope for 1210 package land patterns and do not require PCB layout modification. Standard 1210 footprints accommodate all three parts without design changes.