RC3216J565CS Equivalent & Substitute Parts Reference

Part Overview

The RC3216J565CS is a 5.6 MOhms ±5% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Samsung Electro-Mechanics. This component is classified as Active product status with 1,111 pieces currently in stock. The part is designed for general-purpose applications requiring high-value resistive elements with moisture resistance and standard industrial tolerance specifications. Substitute parts are identified based on matching electrical characteristics, mechanical compatibility, and compliance certifications.

Substiute Parts

RC3216J565CS

Samsung Electro-MechanicsIn Stock: 1147RC3216J565CS Datasheet

Current PartRFQ

RC1206JR-075M6L

YAGEOIn Stock: 9388RC1206JR-075M6L Datasheet

DirectRFQ

AC1206FR-075M6L

YAGEOIn Stock: 11126AC1206FR-075M6L Datasheet

UpgradeRFQ

RC1206FR-075M6L

YAGEOIn Stock: 2189RC1206FR-075M6L Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RC3216J565CS are classified into two categories based on tolerance specifications:

Direct Equivalent (Same Tolerance ±5%):

• RC1206JR-075M6L (YAGEO) maintains identical electrical specifications with ±5% tolerance, matching the original part's precision class.

Upgraded Tolerance (±1%):

• RC1206FR-075M6L (YAGEO) and AC1206FR-075M6L (YAGEO) provide tighter tolerance at ±1%, suitable for applications requiring improved accuracy.

All substitute parts share the following critical parameters with the main part:

• Resistance value: 5.6 MOhms
• Power rating: 0.25W (1/4W)
• Package: 1206 (3216 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Moisture resistance: Yes
• MSL rating: 1 (Unlimited)
• RoHS3 compliance: Yes

Physical dimensions vary slightly between manufacturers but remain within acceptable tolerances for 1206 package specifications.

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement (Equivalent Performance): RC1206JR-075M6L is the appropriate selection when maintaining identical tolerance specifications (±5%) is required. This part is manufactured by YAGEO and carries Active product status with 9,367 pieces in stock. It is supplied in Tape & Reel packaging and meets all RoHS3 and REACH compliance requirements.

For Upgraded Tolerance Applications: RC1206FR-075M6L and AC1206FR-075M6L both provide ±1% tolerance, representing improved accuracy over the original ±5% specification. RC1206FR-075M6L is supplied in Cut Tape & Digi-Reel® packaging with 2,100 pieces available. AC1206FR-075M6L includes AEC-Q200 automotive qualification and is supplied in Tape & Reel packaging with 11,067 pieces in stock.

Selection between RC1206FR-075M6L and AC1206FR-075M6L depends on application requirements. AC1206FR-075M6L is specified for automotive applications requiring AEC-Q200 compliance. RC1206FR-075M6L is suitable for general industrial applications where automotive qualification is not required.

All substitute parts maintain compliance with RoHS3, REACH Unaffected status, and EAR99 export classification matching the original part.

Frequently Asked Questions (FAQ)

Q: Can RC1206JR-075M6L be used as a direct replacement for RC3216J565CS? A: Yes. RC1206JR-075M6L is a direct equivalent with matching resistance value (5.6 MOhms), tolerance (±5%), power rating (0.25W), package (1206), and all environmental specifications. Both parts are thick film composition with identical temperature coefficients and operating ranges.

Q: What is the difference between the ±5% and ±1% tolerance parts? A: The main part and RC1206JR-075M6L are specified at ±5% tolerance. RC1206FR-075M6L and AC1206FR-075M6L are specified at ±1% tolerance, providing tighter resistance value accuracy. Selection depends on circuit requirements for precision. All other electrical and mechanical parameters remain identical.

Q: Is AC1206FR-075M6L suitable for non-automotive applications? A: AC1206FR-075M6L meets all general industrial specifications and can be used in non-automotive applications. The AEC-Q200 automotive qualification is an additional certification that does not restrict use in other applications. This part offers ±1% tolerance with automotive-grade reliability.

Q: Are there packaging differences between substitute parts? A: Yes. RC1206JR-075M6L is supplied in Tape & Reel (TR) packaging. RC1206FR-075M6L is supplied in Cut Tape (CT) & Digi-Reel® packaging. AC1206FR-075M6L is supplied in Tape & Reel (TR) packaging. Packaging selection depends on assembly process requirements and volume specifications.

Q: Do all parts meet moisture resistance requirements? A: Yes. The main part RC3216J565CS and all substitute parts (RC1206JR-075M6L, RC1206FR-075M6L, AC1206FR-075M6L) are specified as moisture resistant with MSL rating 1 (Unlimited), indicating no moisture sensitivity limitations.

Q: Are all parts RoHS3 compliant? A: Yes. RC3216J565CS, RC1206JR-075M6L, RC1206FR-075M6L, and AC1206FR-075M6L are all ROHS3 Compliant with REACH Unaffected status.

Q: What is the physical size difference between parts? A: RC3216J565CS dimensions are 0.126" L x 0.063" W (3.20mm x 1.60mm) with height 0.026" (0.66mm). YAGEO substitute parts are 0.122" L x 0.063" W (3.10mm x 1.60mm) with height 0.026" (0.65mm). Both conform to 1206 package specifications with minor dimensional variations within acceptable tolerances.