Equivalent & Substitute Parts for RC3216J561CS

Part Overview

The RC3216J561CS is a 560 Ohm ±5% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Samsung Electro-Mechanics. This component is classified as Active product status with ROHS3 compliance and unlimited moisture sensitivity level (MSL 1). The part is moisture resistant and suitable for general-purpose applications across the operating temperature range of -55°C to 155°C.

Equivalent and substitute parts are identified to address inventory availability, supply chain continuity, design upgrades for improved tolerance specifications, or application-specific requirements such as automotive qualification (AEC-Q200) or enhanced performance characteristics.

Key Parameters

Parameter	Value	Criticality for Substitution
Resistance Value	560 Ohms	Critical - Must Match Exactly
Tolerance	±5%	Critical - Defines Acceptable Variance
Power Rating	0.25W (1/4W)	Critical - Minimum Requirement
Package / Case	1206 (3216 Metric)	Critical - Physical Compatibility
Composition	Thick Film	Critical - Technology Type
Temperature Coefficient	±100ppm/°C	Important - Performance Stability
Operating Temperature Range	-55°C to 155°C	Important - Environmental Compatibility
RoHS Status	ROHS3 Compliant	Important - Regulatory Requirement
Moisture Sensitivity Level	MSL 1 (Unlimited)	Important - Handling and Storage

Substitute Part Grouping Explanation

Substitute parts are categorized based on the following substitution logic:

Direct Substitutes (Equivalent Tolerance - ±5%): Parts that maintain the original ±5% tolerance specification while meeting all critical parameters (560 Ohms, 0.25W, 1206 package, thick film composition, ROHS3 compliance). These parts are electrically and mechanically interchangeable with the RC3216J561CS.

Upgrade Substitutes (Improved Tolerance - ±1%): Parts that exceed the original specification by providing tighter ±1% tolerance while maintaining all other critical parameters. These parts offer superior accuracy and are suitable for applications requiring higher precision. Power rating remains 0.25W, package remains 1206, and composition remains thick film.

Similar Parts (Tolerance Match with Feature Variations): Parts that match the tolerance specification (±5%) and core parameters but include additional features such as automotive AEC-Q200 qualification or enhanced power ratings (0.75W). These parts are compatible for applications where the additional features do not conflict with design requirements.

Key Parameters Determining Substitutability:

Resistance value: 560 Ohms (exact match required)
Package: 1206 (3216 Metric) (exact match required)
Power rating: Minimum 0.25W (equal or higher acceptable)
Tolerance: ±5% or better (tighter tolerance acceptable)
Composition: Thick film (exact match required)
Temperature coefficient: ±100ppm/°C (standard across all parts)
Operating temperature: -55°C to 155°C (standard across all parts)

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Composition	Features	Product Status	RoHS
RC3216J561CS	Samsung Electro-Mechanics	560 Ω	±5%	0.25	1206	Thick Film	Moisture Resistant	Active	ROHS3
RC1206JR-07560RL	YAGEO	560 Ω	±5%	0.25	1206	Thick Film	Moisture Resistant	Active	ROHS3
RMCF1206FT560R	Stackpole Electronics Inc	560 Ω	±1%	0.25	1206	Thick Film	Automotive AEC-Q200	Active	ROHS3
AC1206FR-07560RL	YAGEO	560 Ω	±1%	0.25	1206	Thick Film	Automotive AEC-Q200, Moisture Resistant	Active	ROHS3
CR1206-FX-5600ELF	Bourns Inc.	560 Ω	±1%	0.25	1206	Thick Film	Moisture Resistant	Active	ROHS3
ERJ-8ENF5600V	Panasonic Electronic Components	560 Ω	±1%	0.25	1206	Thick Film	Automotive AEC-Q200	Not For New Designs	ROHS3
KTR18EZPF5600	Rohm Semiconductor	560 Ω	±1%	0.25	1206	Thick Film	Automotive AEC-Q200, High Voltage	Active	ROHS3
RC1206FR-07560RL	YAGEO	560 Ω	±1%	0.25	1206	Thick Film	Moisture Resistant	Active	ROHS3
AC1206JR-07560RL	YAGEO	560 Ω	±5%	0.25	1206	Thick Film	Automotive AEC-Q200, Moisture Resistant	Active	ROHS3
CRCW1206560RFKEA	Vishay Dale	560 Ω	±1%	0.25	1206	Thick Film	Automotive AEC-Q200	Active	ROHS3
CRCW1206560RFKEAHP	Vishay Dale	560 Ω	±1%	0.75	1206	Thick Film	Automotive AEC-Q200, Pulse Withstanding	Active	ROHS3

Engineering Selection Recommendations

For Direct Replacement (Equivalent Tolerance):

RC1206JR-07560RL (YAGEO) is the primary direct substitute. It maintains the ±5% tolerance specification, 0.25W power rating, 1206 package, and thick film composition. Both parts are Active status with ROHS3 compliance and MSL 1 rating. This part provides the highest inventory availability (254,900 pcs) and is suitable for applications where the original tolerance specification is required.

AC1206JR-07560RL (YAGEO) is an alternative direct substitute with identical electrical specifications but includes automotive AEC-Q200 qualification and moisture resistance features. This part is appropriate for automotive or harsh environment applications where the additional qualification is beneficial.

For Design Upgrades (Improved Tolerance):

RC1206FR-07560RL (YAGEO) provides ±1% tolerance with the same 0.25W power rating and 1206 package. This part is Active status with extensive inventory (500,300 pcs) and is suitable for applications requiring higher precision without changing the physical footprint or power characteristics.

AC1206FR-07560RL (YAGEO) combines ±1% tolerance with automotive AEC-Q200 qualification and moisture resistance. This part is recommended for automotive applications requiring improved accuracy.

RMCF1206FT560R (Stackpole Electronics Inc) offers ±1% tolerance with automotive AEC-Q200 qualification. This part is suitable for automotive applications where tighter tolerance is required.

CRCW1206560RFKEA (Vishay Dale) provides ±1% tolerance with automotive AEC-Q200 qualification and is available in high volume (5,200 pcs).

For Enhanced Power Requirements:

CRCW1206560RFKEAHP (Vishay Dale) provides 0.75W power rating (three times the original specification) while maintaining ±1% tolerance, 1206 package, and automotive AEC-Q200 qualification. This part is suitable for applications requiring higher power dissipation capability.

For Automotive Applications:

Parts with AEC-Q200 qualification (RMCF1206FT560R, AC1206FR-07560RL, KTR18EZPF5600, CRCW1206560RFKEA, CRCW1206560RFKEAHP) are suitable for automotive applications. Among these, parts with Active product status are preferred for new designs.

Parts to Avoid for New Designs:

ERJ-8ENF5600V (Panasonic Electronic Components) is marked as "Not For New Designs" and should not be selected for new product development, despite meeting all electrical and mechanical specifications.

Frequently Asked Questions (FAQ)

Q1: Can I use a ±1% tolerance part as a substitute for the ±5% RC3216J561CS?

A: Yes. Tighter tolerance specifications are acceptable substitutes. A ±1% part will perform within the ±5% requirement and provides superior accuracy. All ±1% alternatives listed maintain the same 560 Ohm resistance value, 0.25W power rating, 1206 package, and thick film composition.

Q2: What is the difference between Direct Substitutes and Upgrade Substitutes?

A: Direct Substitutes (RC1206JR-07560RL, AC1206JR-07560RL) maintain the original ±5% tolerance specification and are electrically identical to the RC3216J561CS. Upgrade Substitutes provide ±1% tolerance, offering improved accuracy for applications requiring tighter resistance control. Both categories are physically and mechanically compatible.

Q3: Can I use CRCW1206560RFKEAHP (0.75W) in place of RC3216J561CS (0.25W)?

A: Yes. The CRCW1206560RFKEAHP has a higher power rating (0.75W versus 0.25W), which means it can safely handle the same or greater power dissipation. The 1206 package dimensions remain identical. This part is suitable if your application requires higher power capability or if you are upgrading the design for enhanced thermal performance.

Q4: Are all substitute parts ROHS3 compliant?

A: Yes. All substitute parts listed in this reference are ROHS3 compliant, matching the regulatory status of the original RC3216J561CS.

Q5: Which substitute part has the highest inventory availability?

A: RC1206FR-07560RL (YAGEO) has the highest inventory with 500,300 pcs in stock. This part offers ±1% tolerance, making it suitable for both direct replacement and design upgrades.

Q6: Can I use automotive-qualified parts (AEC-Q200) in non-automotive applications?

A: Yes. Automotive-qualified parts exceed the requirements for general-purpose applications. Parts with AEC-Q200 qualification can be used in any application where the original part is suitable. The additional qualification does not create incompatibility with non-automotive designs.

Q7: What is the significance of MSL 1 (Unlimited) rating?

A: MSL 1 indicates unlimited shelf life and no moisture sensitivity restrictions. All parts in this reference have MSL 1 rating, meaning they do not require special moisture-controlled storage or handling procedures. This simplifies inventory management and reduces supply chain complexity.

Q8: Why is ERJ-8ENF5600V marked as "Not For New Designs"?

A: The "Not For New Designs" status indicates that the manufacturer (Panasonic Electronic Components) has discontinued active development and support for this product line. While the part meets all electrical and mechanical specifications, it should not be selected for new product development. Use active-status alternatives instead.

Q9: What is the difference between Cut Tape (CT) & Digi-Reel® and Tape & Reel (TR) packaging?

A: Both are reel-based packaging formats suitable for automated assembly. Cut Tape & Digi-Reel® allows for smaller order quantities and flexibility in tape cutting. Tape & Reel (TR) is standard for high-volume production. Both formats are compatible with standard pick-and-place equipment. Packaging choice depends on production volume and assembly line requirements.

Q10: Can I mix different manufacturers' parts in the same circuit board assembly?

A: Yes. All substitute parts listed maintain identical electrical specifications (560 Ohms, ±5% or better tolerance, 0.25W or higher power rating) and physical dimensions (1206 package). They are functionally interchangeable. Mixing manufacturers is acceptable from an engineering perspective, though some organizations may have procurement or quality policies that restrict supplier diversity.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message