RC3216J361CS 360 Ohm 1/4W 1206 Chip Resistor Equivalent & Substitute Parts

Part Overview

The RC3216J361CS is a 360 Ohm ±5% thick film chip resistor manufactured by Samsung Electro-Mechanics in 1206 (3216 Metric) package format. This component is rated for 0.25W (1/4W) power dissipation with moisture-resistant construction and operates across the temperature range of -55°C to 155°C. The part is ROHS3 compliant and carries MSL Level 1 (unlimited moisture sensitivity rating).

The RC3216J361CS maintains Active product status with 965 pieces currently in stock. Equivalent and substitute parts are identified based on matching electrical specifications (360 Ohm resistance, 0.25W power rating, 1206 package), mechanical compatibility, and environmental compliance certifications.

Key Parameters

Parameter	Value
Resistance	360 Ohms
Tolerance	±5%
Power Rating	0.25W (1/4W)
Package / Case	1206 (3216 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C to 155°C
Moisture Resistance	Yes
RoHS Status	ROHS3 Compliant
MSL Rating	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts for the RC3216J361CS are classified into two categories based on electrical parameter compatibility:

Direct Substitutes (Equivalent Tolerance ±5%)

Direct substitutes maintain the same ±5% tolerance specification as the main part. These parts are electrically and mechanically interchangeable without circuit performance impact:

RC1206JR-07360RL (YAGEO) – Identical 360 Ohm ±5% specification, 1206 package, moisture resistant

Upgrade Substitutes (Tighter Tolerance ±1%)

Upgrade substitutes feature improved tolerance of ±1%, providing enhanced precision compared to the original ±5% specification. These parts are pin-compatible and mechanically identical but deliver superior electrical performance:

AC1206FR-07360RL (YAGEO) – 360 Ohm ±1%, AEC-Q200 automotive rated
CR1206-FX-3600ELF (Bourns Inc.) – 360 Ohm ±1%, moisture resistant
ERJ-8ENF3600V (Panasonic) – 360 Ohm ±1%, AEC-Q200 automotive rated
KTR18EZPF3600 (Rohm Semiconductor) – 360 Ohm ±1%, AEC-Q200, high voltage
MCR18ERTF3600 (Rohm Semiconductor) – 360 Ohm ±1%, discontinued at DiGi Electronics
RC1206FR-07360RL (YAGEO) – 360 Ohm ±1%, moisture resistant
RMCF1206FT360R (Stackpole Electronics) – 360 Ohm ±1%, AEC-Q200 automotive rated

Similar Parts (Same Tolerance, Different Features)

Similar parts maintain ±5% tolerance but introduce additional certifications or feature enhancements:

AC1206JR-07360RL (YAGEO) – 360 Ohm ±5%, AEC-Q200 automotive rated, moisture resistant
CRCW1206360RFKEA (Vishay Dale) – 360 Ohm ±1%, AEC-Q200 automotive rated

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op. Temp Range	Composition	RoHS	MSL	Product Status
RC3216J361CS	Samsung Electro-Mechanics	360 Ω	±5%	0.25	1206	±100ppm/°C	-55 to 155°C	Thick Film	ROHS3	1	Active
RC1206JR-07360RL	YAGEO	360 Ω	±5%	0.25	1206	±100ppm/°C	-55 to 155°C	Thick Film	ROHS3	1	Active
AC1206FR-07360RL	YAGEO	360 Ω	±1%	0.25	1206	±100ppm/°C	-55 to 155°C	Thick Film	ROHS3	1	Active
CR1206-FX-3600ELF	Bourns Inc.	360 Ω	±1%	0.25	1206	±100ppm/°C	-55 to 155°C	Thick Film	ROHS3	1	Active
ERJ-8ENF3600V	Panasonic Electronic Components	360 Ω	±1%	0.25	1206	±100ppm/°C	-55 to 155°C	Thick Film	ROHS3	1	Not For New Designs
KTR18EZPF3600	Rohm Semiconductor	360 Ω	±1%	0.25	1206	±100ppm/°C	-55 to 155°C	Thick Film	ROHS3	1	Active
MCR18ERTF3600	Rohm Semiconductor	360 Ω	±1%	0.25	1206	±100ppm/°C	-55 to 155°C	Thick Film	ROHS3	1	Discontinued at DiGi Electronics
RC1206FR-07360RL	YAGEO	360 Ω	±1%	0.25	1206	±100ppm/°C	-55 to 155°C	Thick Film	ROHS3	1	Active
RMCF1206FT360R	Stackpole Electronics Inc	360 Ω	±1%	0.25	1206	±100ppm/°C	-55 to 155°C	Thick Film	ROHS3	1	Active
AC1206JR-07360RL	YAGEO	360 Ω	±5%	0.25	1206	±100ppm/°C	-55 to 155°C	Thick Film	ROHS3	1	Active
CRCW1206360RFKEA	Vishay Dale	360 Ω	±1%	0.25	1206	±100ppm/°C	-55 to 155°C	Thick Film	ROHS3	1	Active

Engineering Selection Recommendations

For Direct Replacement (Equivalent Performance)

RC1206JR-07360RL (YAGEO) is the primary direct substitute, maintaining identical ±5% tolerance and moisture-resistant thick film construction. Both parts are Active status with unlimited MSL rating and ROHS3 compliance. This part is suitable for applications where the original ±5% tolerance specification is required.

For Precision Applications (Upgraded Tolerance)

When circuit design permits tighter tolerance specifications, the following Active-status parts provide ±1% tolerance with full ROHS3 compliance:

RC1206FR-07360RL (YAGEO) – 192,120 units in stock, moisture resistant, Active status
AC1206FR-07360RL (YAGEO) – 5,707 units in stock, AEC-Q200 automotive rated, Active status
CR1206-FX-3600ELF (Bourns Inc.) – 54,606 units in stock, moisture resistant, Active status
RMCF1206FT360R (Stackpole Electronics) – 18,373 units in stock, AEC-Q200 automotive rated, Active status
KTR18EZPF3600 (Rohm Semiconductor) – 11,675 units in stock, AEC-Q200 automotive rated, high voltage, Active status

For Automotive Applications (AEC-Q200 Rated)

Applications requiring automotive qualification should select from AEC-Q200 certified parts:

AC1206FR-07360RL (YAGEO) – ±1% tolerance, Active status
RMCF1206FT360R (Stackpole Electronics) – ±1% tolerance, Active status
KTR18EZPF3600 (Rohm Semiconductor) – ±1% tolerance, high voltage, Active status
AC1206JR-07360RL (YAGEO) – ±5% tolerance, Active status
CRCW1206360RFKEA (Vishay Dale) – ±1% tolerance, Active status

Parts to Avoid for New Designs

ERJ-8ENF3600V (Panasonic) – Marked "Not For New Designs"
MCR18ERTF3600 (Rohm Semiconductor) – Discontinued at DiGi Electronics

Frequently Asked Questions (FAQ)

Q: Can RC1206JR-07360RL replace RC3216J361CS directly?

A: Yes. RC1206JR-07360RL is a direct substitute with identical electrical specifications (360 Ohm ±5%, 0.25W), same 1206 package, moisture-resistant thick film construction, and equivalent environmental compliance (ROHS3, MSL 1). No circuit modifications are required.

Q: What is the difference between the main part and upgrade substitutes?

A: The main part RC3216J361CS specifies ±5% tolerance. Upgrade substitutes such as RC1206FR-07360RL, AC1206FR-07360RL, and CR1206-FX-3600ELF provide ±1% tolerance, delivering improved precision. All other electrical and mechanical parameters remain identical. Upgrade substitutes are pin-compatible and mechanically interchangeable.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts carry ROHS3 compliance status, matching the environmental certification of the main part RC3216J361CS.

Q: Which substitute has the highest inventory availability?

A: RC1206FR-07360RL (YAGEO) has the highest inventory with 192,120 units in stock. This part offers ±1% tolerance, moisture resistance, and Active product status.

Q: Can I use an AEC-Q200 rated part in a non-automotive application?

A: Yes. AEC-Q200 certification indicates automotive-grade reliability and is suitable for any application. Parts such as AC1206FR-07360RL, RMCF1206FT360R, and KTR18EZPF3600 meet automotive standards and can be used in general industrial and consumer applications without restriction.

Q: What is the physical size difference between substitute parts?

A: All parts use the 1206 (3216 Metric) package with length ranging from 0.120" to 0.126" (3.05mm to 3.20mm) and width of 0.061" to 0.063" (1.55mm to 1.60mm). Height varies from 0.024" to 0.030" (0.60mm to 0.75mm). These dimensional variations are within standard 1206 package tolerances and do not affect PCB footprint compatibility.

Q: Should I select a part marked "Not For New Designs"?

A: No. ERJ-8ENF3600V carries "Not For New Designs" status. For new circuit designs, select from Active-status parts such as RC1206FR-07360RL, AC1206FR-07360RL, CR1206-FX-3600ELF, RMCF1206FT360R, or KTR18EZPF3600.

Q: Is MCR18ERTF3600 available for new projects?

A: MCR18ERTF3600 is discontinued at DiGi Electronics with only 1,760 units remaining in stock. For new designs, select from Active-status alternatives with higher inventory levels.

Q: What does MSL Level 1 mean for this component?

A: MSL (Moisture Sensitivity Level) 1 indicates unlimited shelf life without moisture bake-out requirements. The component can be stored indefinitely without special moisture control measures. All listed parts carry MSL 1 rating.

Q: Can I substitute a ±1% tolerance part for a ±5% tolerance requirement?

A: Yes. A ±1% tolerance part exceeds the ±5% specification and is fully compatible. The tighter tolerance provides improved circuit performance without introducing compatibility issues.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message