RC3216J330CS Equivalent & Substitute Parts Reference

Part Overview

The RC3216J330CS is a 33 Ohm ±5% 0.25W thick film chip resistor manufactured by Samsung Electro-Mechanics in 1206 (3216 Metric) package format. This component is classified as Active product status with ROHS3 compliance and unlimited moisture sensitivity level (MSL 1). The part is suitable for general-purpose applications requiring moisture-resistant thick film construction across the operating temperature range of -55°C to 155°C.

Equivalent and substitute parts are necessary when the original manufacturer part becomes unavailable, when design requirements demand enhanced specifications such as tighter tolerance or automotive qualification, or when supply chain optimization requires alternative sourcing from qualified manufacturers.

Key Parameters

Parameter	Value	Significance for Substitution
Resistance Value	33 Ohms	Must match exactly for direct substitution
Tolerance	±5%	Determines acceptable resistance variance; tighter tolerance (±1%) represents upgrade
Power Rating	0.25W (1/4W)	Must match or exceed for thermal performance
Package / Case	1206 (3216 Metric)	Physical footprint; must match for PCB compatibility
Composition	Thick Film	Determines electrical characteristics and temperature coefficient
Temperature Coefficient	±100ppm/°C	Resistance stability across operating temperature range
Operating Temperature Range	-55°C to 155°C	Must support application environment
RoHS Status	ROHS3 Compliant	Environmental and regulatory compliance requirement
Moisture Sensitivity Level	MSL 1 (Unlimited)	Handling and storage requirements

Substitute Part Grouping Explanation

Substitute parts for the RC3216J330CS are categorized based on the following substitution logic:

Direct Equivalents (Same Tolerance ±5%): Parts maintaining identical electrical specifications (33 Ohms ±5%, 0.25W) with 1206 package compatibility. These provide one-to-one replacement capability without circuit performance impact.

Upgrade Substitutes (Tighter Tolerance ±1%): Parts with enhanced tolerance specification (±1% versus ±5%) while maintaining all other critical parameters. These represent performance upgrades suitable when circuit design requires improved resistance accuracy. Upgrade parts may include additional certifications such as Automotive AEC-Q200 qualification.

Similar Parts (Same Tolerance ±5% with Enhanced Features): Parts matching the original ±5% tolerance but incorporating additional qualifications or features such as automotive AEC-Q200 rating. These maintain electrical equivalence while offering enhanced reliability for specific application environments.

Key Parameters Determining Substitution Eligibility:

Resistance value: 33 Ohms (exact match required)
Power rating: 0.25W minimum (equal or greater acceptable)
Package: 1206 (3216 Metric) (exact match required for PCB compatibility)
Composition: Thick Film (required for temperature coefficient consistency)
Temperature coefficient: ±100ppm/°C (standard for this category)
Operating temperature: -55°C to 155°C minimum (equal or greater range acceptable)
RoHS compliance: ROHS3 (required for regulatory compliance)

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op Temp Range	Features	Product Status
RC3216J330CS	Samsung Electro-Mechanics	33 Ω	±5%	0.25W	1206	±100ppm/°C	-55°C ~ 155°C	Moisture Resistant	Active
RC1206JR-0733RL	YAGEO	33 Ω	±5%	0.25W	1206	±100ppm/°C	-55°C ~ 155°C	Moisture Resistant	Active
AC1206JR-0733RL	YAGEO	33 Ω	±5%	0.25W	1206	±100ppm/°C	-55°C ~ 155°C	Automotive AEC-Q200, Moisture Resistant	Active
AC1206FR-0733RL	YAGEO	33 Ω	±1%	0.25W	1206	±100ppm/°C	-55°C ~ 155°C	Automotive AEC-Q200, Moisture Resistant	Active
CR1206-FX-33R0ELF	Bourns Inc.	33 Ω	±1%	0.25W	1206	±100ppm/°C	-55°C ~ 155°C	Moisture Resistant	Active
ERJ-8ENF33R0V	Panasonic Electronic Components	33 Ω	±1%	0.25W	1206	±100ppm/°C	-55°C ~ 155°C	Automotive AEC-Q200	Not For New Designs
KTR18EZPF33R0	Rohm Semiconductor	33 Ω	±1%	0.25W	1206	±100ppm/°C	-55°C ~ 155°C	Automotive AEC-Q200, High Voltage	Active
MCR18ERTF33R0	Rohm Semiconductor	33 Ω	±1%	0.25W	1206	±100ppm/°C	-55°C ~ 155°C	—	Discontinued at DiGi Electronics
RC1206FR-0733RL	YAGEO	33 Ω	±1%	0.25W	1206	±100ppm/°C	-55°C ~ 155°C	Moisture Resistant	Active
RMCF1206FT33R0	Stackpole Electronics Inc	33 Ω	±1%	0.25W	1206	±100ppm/°C	-55°C ~ 155°C	Automotive AEC-Q200	Active
CRCW120633R0FKEA	Vishay Dale	33 Ω	±1%	0.25W	1206	±100ppm/°C	-55°C ~ 155°C	Automotive AEC-Q200	Active

Engineering Selection Recommendations

For Direct Replacement (No Design Changes Required):

RC1206JR-0733RL (YAGEO) serves as the primary direct equivalent, maintaining ±5% tolerance specification identical to the RC3216J330CS. This part is Active status with full inventory availability and identical electrical performance characteristics.

AC1206JR-0733RL (YAGEO) provides direct electrical equivalence with added Automotive AEC-Q200 qualification. Selection of this part is appropriate when the application environment or customer requirements mandate automotive-grade component certification, while maintaining the original ±5% tolerance specification.

For Upgraded Performance (Tighter Tolerance Applications):

RC1206FR-0733RL (YAGEO) offers ±1% tolerance upgrade with moisture-resistant thick film construction. This part maintains Active product status and is suitable for applications requiring improved resistance accuracy without automotive qualification requirements.

AC1206FR-0733RL (YAGEO) combines ±1% tolerance with Automotive AEC-Q200 qualification and moisture-resistant construction. This part is recommended for automotive or high-reliability applications demanding both enhanced tolerance and industry certification.

CR1206-FX-33R0ELF (Bourns Inc.) provides ±1% tolerance with moisture-resistant thick film composition and Active product status. This part offers an alternative upgrade path from a different manufacturer with established supply chain presence.

RMCF1206FT33R0 (Stackpole Electronics Inc) delivers ±1% tolerance with Automotive AEC-Q200 qualification and Active product status. This part is suitable for automotive applications requiring tighter tolerance specifications.

CRCW120633R0FKEA (Vishay Dale) offers ±1% tolerance with Automotive AEC-Q200 qualification. This part provides high inventory availability (148,256 Pcs) and represents a robust upgrade option for automotive-grade applications.

Parts Not Recommended for New Designs:

ERJ-8ENF33R0V (Panasonic Electronic Components) carries "Not For New Designs" product status designation. While this part meets electrical specifications with ±1% tolerance and Automotive AEC-Q200 qualification, its obsolescence trajectory makes it unsuitable for new product development.

MCR18ERTF33R0 (Rohm Semiconductor) is listed as "Discontinued at DiGi Electronics" and should not be selected for new designs or long-term production requirements.

Frequently Asked Questions (FAQ)

Q: Can RC1206JR-0733RL directly replace RC3216J330CS without circuit modification?

A: Yes. RC1206JR-0733RL maintains identical electrical specifications (33 Ohms ±5%, 0.25W) and 1206 package format. No circuit design changes are required for direct substitution.

Q: What is the difference between ±5% and ±1% tolerance parts, and when should I upgrade?

A: Tolerance specifies the acceptable resistance variance from the nominal 33 Ohm value. ±5% tolerance allows 31.35 to 34.65 Ohms; ±1% tolerance allows 32.67 to 33.33 Ohms. Upgrade to ±1% parts when circuit performance depends on precise resistance values, such as in precision analog circuits, current-limiting applications, or impedance-critical networks. Standard digital circuits typically function adequately with ±5% tolerance.

Q: Are Automotive AEC-Q200 qualified parts suitable for non-automotive applications?

A: Yes. Automotive AEC-Q200 qualification represents enhanced reliability testing and quality assurance standards. These parts are fully compatible with non-automotive applications and provide superior reliability margins. Selection of AEC-Q200 parts for non-automotive use is acceptable and often beneficial for high-reliability requirements.

Q: Does the 1206 package dimension vary between manufacturers?

A: The 1206 (3216 Metric) package standard specifies nominal dimensions of 3.20mm length × 1.60mm width. Manufacturer data shows minor variations in seated height (0.024" to 0.030" maximum) and length tolerances (0.120" to 0.126"). These variations remain within PCB design tolerances and do not affect electrical performance or mechanical compatibility. All listed parts are PCB-compatible within standard 1206 footprint designs.

Q: What is Moisture Sensitivity Level (MSL) 1, and why is it important?

A: MSL 1 (Unlimited) indicates the component requires no special moisture protection during storage or handling. The component can be stored in standard warehouse conditions without desiccant packaging or humidity control. All listed substitute parts carry MSL 1 rating, ensuring identical handling requirements to the original RC3216J330CS.

Q: Can I use parts with higher power ratings as substitutes?

A: The RC3216J330CS is rated 0.25W (1/4W). All listed substitute parts maintain 0.25W rating. Using higher power-rated parts (such as 0.5W or 1W) in the same 1206 package is not recommended because it may alter PCB thermal characteristics and component placement density. Maintain 0.25W specification for design consistency.

Q: Why is ERJ-8ENF33R0V marked "Not For New Designs"?

A: "Not For New Designs" designation indicates the manufacturer has discontinued active development and production planning for this part. While existing inventory may be available, the part faces obsolescence risk. New product designs should select from Active status parts such as AC1206FR-0733RL, CR1206-FX-33R0ELF, or RMCF1206FT33R0 to ensure long-term supply availability.

Q: What RoHS compliance level do these parts meet?

A: All listed parts meet ROHS3 compliance, which restricts hazardous substances (lead, cadmium, mercury, hexavalent chromium, PBBs, PBDEs) in accordance with EU Directive 2011/65/EU. ROHS3 compliance is mandatory for most commercial and industrial applications and is maintained across all substitute options.

Q: Are there any electrical performance differences between the substitute parts?

A: All substitute parts maintain identical electrical specifications: 33 Ohms nominal resistance, ±100ppm/°C temperature coefficient, and -55°C to 155°C operating range. The primary differences are tolerance grade (±5% versus ±1%), manufacturer-specific certifications (Automotive AEC-Q200, High Voltage), and product status (Active versus discontinued). Electrical performance in circuit operation is functionally equivalent across all Active status parts.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message