RC3216J220CS Equivalent & Substitute Parts

Part Overview

The RC3216J220CS is a 22 Ohm ±5% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Samsung Electro-Mechanics. This component is classified as Active product status with 1013 units currently in stock. The part is ROHS3 compliant and features moisture-resistant construction suitable for general industrial and commercial applications.

Equivalent and substitute parts are necessary when the original manufacturer part becomes unavailable, when design requirements shift toward higher tolerance specifications, or when automotive-grade certifications are required for specific applications.

Key Parameters

Parameter	Value
Resistance	22 Ohms
Tolerance	±5%
Power Rating	0.25W (1/4W)
Package / Case	1206 (3216 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C to 155°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution logic for the RC3216J220CS is based on the following allowed parameters:

Direct Equivalents (Same Tolerance ±5%):

Resistance value: 22 Ohms
Tolerance: ±5%
Power rating: 0.25W minimum
Package: 1206 (3216 Metric)
Temperature coefficient: ±100ppm/°C
Operating temperature range: -55°C to 155°C
RoHS3 compliance required

Upgrade Options (Higher Tolerance ±1%):

Resistance value: 22 Ohms
Tolerance: ±1% (tighter tolerance than original)
Power rating: 0.25W minimum
Package: 1206 (3216 Metric)
Temperature coefficient: ±100ppm/°C
Operating temperature range: -55°C to 155°C
RoHS3 compliance required
May include automotive AEC-Q200 certification

Similar Parts (Same Tolerance ±5% with Enhanced Features):

Resistance value: 22 Ohms
Tolerance: ±5%
Power rating: 0.25W or higher
Package: 1206 (3216 Metric)
May include automotive AEC-Q200 certification or higher power ratings

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op Temp Range	RoHS3	MSL	Product Status
RC3216J220CS	Samsung Electro-Mechanics	22Ω	±5%	0.25	1206	±100ppm/°C	-55 to 155°C	Yes	1	Active
RC1206JR-0722RL	YAGEO	22Ω	±5%	0.25	1206	±100ppm/°C	-55 to 155°C	Yes	1	Active
AC1206FR-0722RL	YAGEO	22Ω	±1%	0.25	1206	±100ppm/°C	-55 to 155°C	Yes	1	Active
CR1206-FX-22R0ELF	Bourns Inc.	22Ω	±1%	0.25	1206	±100ppm/°C	-55 to 155°C	Yes	1	Active
ERJ-8ENF22R0V	Panasonic Electronic Components	22Ω	±1%	0.25	1206	±100ppm/°C	-55 to 155°C	Yes	1	Not For New Designs
KTR18EZPF22R0	Rohm Semiconductor	22Ω	±1%	0.25	1206	±100ppm/°C	-55 to 155°C	Yes	1	Active
RC1206FR-0722RL	YAGEO	22Ω	±1%	0.25	1206	±100ppm/°C	-55 to 155°C	Yes	1	Active
RMCF1206FT22R0	Stackpole Electronics Inc	22Ω	±1%	0.25	1206	±100ppm/°C	-55 to 155°C	Yes	1	Active
AC1206JR-0722RL	YAGEO	22Ω	±5%	0.25	1206	±100ppm/°C	-55 to 155°C	Yes	1	Active
CRCW120622R0FKEA	Vishay Dale	22Ω	±1%	0.25	1206	±100ppm/°C	-55 to 155°C	Yes	1	Active
CRCW120622R0FKEAHP	Vishay Dale	22Ω	±1%	0.75	1206	±100ppm/°C	-55 to 155°C	Yes	1	Active

Engineering Selection Recommendations

For Direct Replacement (Same Specifications): RC1206JR-0722RL from YAGEO is the primary direct equivalent, offering identical electrical specifications and package dimensions with Active product status and high inventory availability (30,326 units).

For Upgraded Tolerance Applications: When circuit design requires tighter tolerance specifications, the following Active-status parts provide ±1% tolerance while maintaining all other parameters:

RC1206FR-0722RL (YAGEO) — 138,158 units in stock
RMCF1206FT22R0 (Stackpole Electronics Inc) — 140,599 units in stock
CRCW120622R0FKEA (Vishay Dale) — 31,241 units in stock
AC1206FR-0722RL (YAGEO) — 45,863 units in stock

For Automotive Applications: Parts with AEC-Q200 certification are available as upgrades:

AC1206FR-0722RL (YAGEO, ±1%, AEC-Q200)
KTR18EZPF22R0 (Rohm Semiconductor, ±1%, AEC-Q200, High Voltage)
RMCF1206FT22R0 (Stackpole Electronics Inc, ±1%, AEC-Q200)

Parts to Avoid for New Designs: ERJ-8ENF22R0V (Panasonic) carries "Not For New Designs" status and should not be selected for new circuit implementations.

For Enhanced Power Handling: CRCW120622R0FKEAHP (Vishay Dale) provides 0.75W power rating with pulse withstanding capability while maintaining the 1206 package footprint, suitable for applications requiring higher transient energy absorption.

Frequently Asked Questions (FAQ)

Q: Can RC1206JR-0722RL directly replace RC3216J220CS? A: Yes. RC1206JR-0722RL from YAGEO is a direct equivalent with identical resistance (22Ω), tolerance (±5%), power rating (0.25W), package (1206), temperature coefficient (±100ppm/°C), operating range (-55°C to 155°C), and RoHS3 compliance.

Q: What is the difference between ±5% and ±1% tolerance parts? A: Tolerance defines the maximum deviation from the nominal resistance value. ±5% tolerance allows deviation up to ±1.1Ω from 22Ω, while ±1% tolerance restricts deviation to ±0.22Ω. Applications requiring precise resistance values should use ±1% parts.

Q: Are automotive-grade parts (AEC-Q200) compatible with standard applications? A: Yes. AEC-Q200 certified parts meet automotive reliability standards and are fully compatible with standard industrial and commercial applications. They provide enhanced reliability margins without functional incompatibility.

Q: Does package dimension variation affect PCB compatibility? A: The 1206 (3216 Metric) package is standardized. Minor dimensional variations (e.g., 0.122" vs 0.126" length) do not affect PCB footprint compatibility, as all parts fit within standard 1206 land patterns.

Q: Can CRCW120622R0FKEAHP (0.75W) replace the 0.25W original part? A: Yes. Higher power-rated components are functionally compatible with lower power applications. The 0.75W part provides additional thermal margin and pulse withstanding capability without affecting circuit operation.

Q: What does MSL 1 (Unlimited) mean? A: Moisture Sensitivity Level 1 indicates the component requires no special moisture control during storage or handling. Standard warehouse conditions are acceptable without desiccant packs or controlled humidity environments.

Q: Why is ERJ-8ENF22R0V marked "Not For New Designs"? A: This designation indicates the manufacturer has discontinued active development and recommends alternative parts for new circuit designs. Existing inventory may still be available, but long-term supply cannot be guaranteed.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message