RC3216J164CS Equivalent & Substitute Parts Reference

Part Overview

The RC3216J164CS is a 160 kOhms ±5% 0.25W thick film chip resistor manufactured by Samsung Electro-Mechanics in 1206 (3216 Metric) package format. This component is classified as Active product status with moisture-resistant construction and unlimited moisture sensitivity level (MSL 1). The part is ROHS3 compliant and REACH unaffected, suitable for general-purpose resistive applications across industrial and commercial electronics.

Substitute parts are necessary when the original manufacturer part becomes unavailable, when design requirements demand improved tolerance specifications, or when automotive-grade qualification is required for specific applications.

Substiute Parts

RC3216J164CS

Samsung Electro-MechanicsIn Stock: 670RC3216J164CS Datasheet

Current PartRFQ

RC1206JR-07160KL

YAGEOIn Stock: 5746RC1206JR-07160KL Datasheet

DirectRFQ

RC1206FR-07160KL

YAGEOIn Stock: 137091RC1206FR-07160KL Datasheet

UpgradeRFQ

CRCW1206160KFKEA

Vishay DaleIn Stock: 27285CRCW1206160KFKEA Datasheet

SimilarRFQ

ERJ-8ENF1603V

Panasonic Electronic ComponentsIn Stock: 54595ERJ-8ENF1603V Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution logic for the RC3216J164CS is based on the following allowed parameters:

Primary Substitution Criteria:

• Resistance value must equal 160 kOhms
• Package / Case must be 1206 (3216 Metric)
• Power rating must be 0.25W (1/4W) minimum
• Composition must be Thick Film
• Operating temperature range must encompass -55°C ~ 155°C
• Temperature coefficient must be ±100ppm/°C
• RoHS3 compliance is mandatory
• MSL rating must be 1 (Unlimited)

Tolerance Consideration: The main part specifies ±5% tolerance. Direct substitutes maintain ±5% tolerance for drop-in replacement without circuit redesign. Upgrade substitutes offer ±1% tolerance, providing improved accuracy for precision applications while maintaining all other electrical and mechanical parameters.

Automotive Qualification: Similar parts with AEC-Q200 automotive qualification are listed as alternatives for applications requiring automotive-grade reliability, though this is an enhancement rather than a requirement for general substitution.

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement (Same Tolerance): RC1206JR-07160KL (YAGEO) is the primary direct substitute for RC3216J164CS. Both parts maintain ±5% tolerance specification, identical power rating, package format, and operating temperature range. This part is Active status with full ROHS3 compliance and unlimited MSL rating. Selection of this substitute requires no circuit redesign or tolerance re-evaluation.

For Tolerance Upgrade: RC1206FR-07160KL (YAGEO) provides improved ±1% tolerance while maintaining all other electrical and mechanical specifications identical to the main part. This upgrade substitute is recommended when circuit design requires tighter tolerance control. Product status is Active with full compliance certifications.

For Automotive Applications: CRCW1206160KFKEA (Vishay Dale) and ERJ-8ENF1603V (Panasonic Electronic Components) both provide AEC-Q200 automotive qualification with ±1% tolerance. CRCW1206160KFKEA maintains Active product status. ERJ-8ENF1603V carries "Not For New Designs" status, limiting its use to legacy system support or existing inventory management only.

Compliance Verification: All listed substitutes maintain ROHS3 compliance, REACH unaffected status, and MSL 1 (Unlimited) rating. No additional handling or storage procedures are required when transitioning between these parts.

Frequently Asked Questions (FAQ)

Q: Can RC1206JR-07160KL directly replace RC3216J164CS without circuit modification?

A: Yes. RC1206JR-07160KL is a direct substitute with identical tolerance (±5%), power rating (0.25W), package format (1206), operating temperature range (-55°C ~ 155°C), and temperature coefficient (±100ppm/°C). No circuit redesign is required.

Q: What is the difference between the direct substitute and upgrade substitute?

A: RC1206JR-07160KL (direct) maintains ±5% tolerance matching the original part. RC1206FR-07160KL (upgrade) improves tolerance to ±1% while keeping all other specifications identical. The upgrade is suitable for applications requiring higher accuracy.

Q: Are CRCW1206160KFKEA and ERJ-8ENF1603V suitable for new designs?

A: CRCW1206160KFKEA is suitable for new designs with Active product status. ERJ-8ENF1603V carries "Not For New Designs" status and should only be used for legacy system support or existing inventory applications.

Q: Do all substitute parts have the same physical dimensions?

A: All parts use 1206 (3216 Metric) package format. Minor dimensional variations exist: RC3216J164CS and CRCW1206160KFKEA measure 0.126" L x 0.063" W, while RC1206JR-07160KL and RC1206FR-07160KL measure 0.122" L x 0.063" W. These variations are within standard 1206 package tolerance and do not affect PCB footprint compatibility.

Q: What is the significance of AEC-Q200 qualification on CRCW1206160KFKEA and ERJ-8ENF1603V?

A: AEC-Q200 is an automotive industry qualification standard. These parts are qualified for automotive applications requiring enhanced reliability testing. This qualification is not required for general industrial or commercial applications but is mandatory for automotive system integration.

Q: Are moisture sensitivity considerations different between these parts?

A: No. All listed parts maintain MSL 1 (Unlimited) rating, indicating unlimited shelf life without moisture baking requirements. Handling and storage procedures are identical across all substitutes.

Q: Can I use ERJ-8ENF1603V in a new product design?

A: No. ERJ-8ENF1603V is marked "Not For New Designs." This designation indicates the manufacturer is discontinuing this product line. Use RC1206JR-07160KL, RC1206FR-07160KL, or CRCW1206160KFKEA for new designs.

Q: What packaging formats are available for these substitutes?

A: All substitute parts are supplied in Tape & Reel (TR) format, suitable for automated assembly processes. The main part RC3216J164CS is supplied in standard packaging format.