RC3216J133CS 13kΩ 1/4W 1206 Chip Resistor Equivalent & Substitute Parts

Part Overview

The RC3216J133CS is a 13 kΩ ±5% 0.25W thick film chip resistor in 1206 (3216 metric) package manufactured by Samsung Electro-Mechanics. This component is classified as Active product status with 1004 units in current inventory. The RC3216J133CS serves as a general-purpose resistive element in consumer and industrial electronic circuits requiring moisture-resistant thick film construction.

Substitute parts are identified when equivalent electrical performance and mechanical compatibility are maintained within the allowed parameter tolerances for this resistor category. Alternatives exist across multiple manufacturers with varying tolerance grades and automotive certifications.

Key Parameters

Parameter	Value	Specification Basis
Resistance Value	13 kΩ	Core electrical specification
Tolerance	±5%	Defines acceptable resistance range
Power Rating	0.25W (1/4W)	Thermal dissipation capability
Package Type	1206 (3216 Metric)	Physical form factor and footprint
Composition	Thick Film	Manufacturing technology
Temperature Coefficient	±100ppm/°C	Resistance stability over temperature
Operating Temperature Range	-55°C to +155°C	Environmental operating limits
Moisture Sensitivity Level	MSL 1 (Unlimited)	Moisture handling classification
RoHS Status	ROHS3 Compliant	Environmental compliance

Substitute Part Grouping Explanation

Substitution logic for the RC3216J133CS is based on the following criteria:

Direct Electrical Equivalence (Same Tolerance Grade): Parts maintaining ±5% tolerance with identical 13 kΩ resistance, 0.25W power rating, and 1206 package form direct substitutes. These include RC1206JR-0713KL (YAGEO). Direct substitutes preserve the original tolerance specification and are interchangeable without circuit redesign.

Upgraded Tolerance Grade (±1% vs ±5%): Parts with ±1% tolerance represent performance upgrades while maintaining 13 kΩ resistance, 0.25W power rating, and 1206 package. These include RC1206FR-0713KL (YAGEO), AC1206FR-0713KL (YAGEO), and CR1206-FX-1302ELF (Bourns Inc.). Upgraded tolerance provides tighter resistance control suitable for precision applications.

Automotive-Qualified Variants (AEC-Q200): Parts certified to AEC-Q200 automotive standard include CRCW120613K0FKEA (Vishay Dale), AC1206FR-0713KL (YAGEO), and ERJ-8ENF1302V (Panasonic). These maintain electrical specifications while adding automotive reliability qualification.

Enhanced Power Rating (0.75W vs 0.25W): CRCW120613K0FKEAHP (Vishay Dale) provides 0.75W power rating in the same 1206 package, offering increased thermal headroom for higher dissipation applications while maintaining 13 kΩ resistance and ±1% tolerance.

Product Status Consideration: ERJ-8ENF1302V carries "Not For New Designs" status and is included for reference only in legacy system support scenarios.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op Temp Range	MSL	RoHS	Product Status
RC3216J133CS	Samsung Electro-Mechanics	13 kΩ	±5%	0.25	1206	±100ppm/°C	-55 to +155°C	1	ROHS3	Active
RC1206JR-0713KL	YAGEO	13 kΩ	±5%	0.25	1206	±100ppm/°C	-55 to +155°C	1	ROHS3	Active
RC1206FR-0713KL	YAGEO	13 kΩ	±1%	0.25	1206	±100ppm/°C	-55 to +155°C	1	ROHS3	Active
AC1206FR-0713KL	YAGEO	13 kΩ	±1%	0.25	1206	±100ppm/°C	-55 to +155°C	1	ROHS3	Active
CR1206-FX-1302ELF	Bourns Inc.	13 kΩ	±1%	0.25	1206	±100ppm/°C	-55 to +155°C	1	ROHS3	Active
CRCW120613K0FKEA	Vishay Dale	13 kΩ	±1%	0.25	1206	±100ppm/°C	-55 to +155°C	1	ROHS3	Active
CRCW120613K0FKEAHP	Vishay Dale	13 kΩ	±1%	0.75	1206	±100ppm/°C	-55 to +155°C	1	ROHS3	Active
ERJ-8ENF1302V	Panasonic Electronic Components	13 kΩ	±1%	0.25	1206	±100ppm/°C	-55 to +155°C	1	ROHS3	Not For New Designs

Engineering Selection Recommendations

For Direct Replacement (Identical Specifications): RC1206JR-0713KL (YAGEO) provides direct substitution with matching ±5% tolerance and 0.25W power rating. This part maintains functional equivalence with the RC3216J133CS and is suitable for applications where tolerance grade is not a limiting factor.

For Precision Applications (Tighter Tolerance Required): RC1206FR-0713KL (YAGEO) or CR1206-FX-1302ELF (Bourns Inc.) are selected when circuit design requires ±1% tolerance control. Both parts maintain 0.25W power rating and 1206 package compatibility. RC1206FR-0713KL offers higher inventory availability (68,398 units) compared to CR1206-FX-1302ELF (23,457 units).

For Automotive Applications (AEC-Q200 Certification Required): AC1206FR-0713KL (YAGEO), CRCW120613K0FKEA (Vishay Dale), or ERJ-8ENF1302V (Panasonic) are specified when automotive reliability qualification is mandated. AC1206FR-0713KL and CRCW120613K0FKEA are Active status products suitable for new designs. ERJ-8ENF1302V carries "Not For New Designs" status and is restricted to legacy system support only.

For Elevated Power Dissipation (Higher Thermal Margin): CRCW120613K0FKEAHP (Vishay Dale) provides 0.75W power rating in the same 1206 package footprint, offering three times the power dissipation capability of the original 0.25W specification. This part includes AEC-Q200 automotive certification and pulse withstanding capability.

Compliance Verification: All substitute parts maintain ROHS3 compliance, MSL 1 moisture sensitivity level, and identical operating temperature range (-55°C to +155°C). No additional environmental qualification is required for substitution.

Frequently Asked Questions (FAQ)

Q: Can RC1206JR-0713KL replace RC3216J133CS in all applications?

A: RC1206JR-0713KL provides direct electrical and mechanical substitution. Both parts share identical 13 kΩ resistance, ±5% tolerance, 0.25W power rating, and 1206 package. Substitution is valid for applications where ±5% tolerance specification is acceptable. If circuit design requires tighter tolerance control, upgraded ±1% parts must be evaluated.

Q: What is the difference between direct substitutes and upgraded tolerance parts?

A: Direct substitutes (RC1206JR-0713KL) maintain the original ±5% tolerance specification. Upgraded tolerance parts (RC1206FR-0713KL, AC1206FR-0713KL, CR1206-FX-1302ELF) provide ±1% tolerance, reducing resistance variation by a factor of five. Upgraded parts are interchangeable from a mechanical and thermal perspective but provide enhanced precision for applications requiring tighter component matching.

Q: Are automotive-qualified parts (AEC-Q200) interchangeable with standard industrial parts?

A: Automotive-qualified parts (AC1206FR-0713KL, CRCW120613K0FKEA, ERJ-8ENF1302V) maintain identical electrical specifications and 1206 package compatibility with standard industrial parts. AEC-Q200 certification adds reliability qualification for automotive temperature cycling and vibration environments. Substitution from standard to automotive-qualified parts is valid; reverse substitution (automotive to standard) is not recommended for automotive applications.

Q: What is the significance of the CRCW120613K0FKEAHP 0.75W power rating?

A: CRCW120613K0FKEAHP provides 0.75W power dissipation capability compared to 0.25W in the original RC3216J133CS. This higher power rating allows the resistor to operate at elevated current levels without thermal stress. The 1206 package dimensions remain identical, enabling direct footprint compatibility. Selection of higher power rating is appropriate when circuit analysis indicates power dissipation exceeding 0.25W at the 13 kΩ resistance value.

Q: Why is ERJ-8ENF1302V marked "Not For New Designs"?

A: ERJ-8ENF1302V carries "Not For New Designs" product status, indicating the manufacturer has discontinued active development and recommends alternative parts for new circuit designs. This part is included in the substitute list for reference in legacy system maintenance and repair scenarios only. For new product development, select from Active status alternatives: RC1206FR-0713KL, AC1206FR-0713KL, CR1206-FX-1302ELF, or CRCW120613K0FKEA.

Q: Are there physical dimension differences between substitute parts?

A: Physical dimensions vary slightly across manufacturers. RC3216J133CS and CR1206-FX-1302ELF measure 0.126" L × 0.063" W (3.20mm × 1.60mm). RC1206JR-0713KL, AC1206FR-0713KL, RC1206FR-0713KL, and CRCW120613K0FKEAHP measure 0.122" L × 0.063" W (3.10mm × 1.60mm). Height variations range from 0.024" to 0.030" (0.60mm to 0.75mm). These dimensional differences are within standard 1206 package tolerance and do not affect PCB footprint compatibility or circuit performance.

Q: What packaging formats are available for substitute parts?

A: RC1206JR-0713KL is supplied in Cut Tape (CT) and Digi-Reel format. All other substitute parts are supplied in Tape & Reel (TR) format. Packaging selection depends on assembly process requirements and volume specifications. Both formats maintain identical component specifications and are interchangeable from an electrical perspective.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message