RC3216F95R3CS Equivalent & Substitute Parts Reference

Part Overview

The RC3216F95R3CS is a 95.3 Ohms ±1% 0.25W thick film chip resistor manufactured by Samsung Electro-Mechanics in 1206 (3216 Metric) package configuration. This component is classified as Active product status with moisture-resistant characteristics and operates across the temperature range of -55°C to 155°C. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and compliance certifications align with the original component, enabling direct replacement in circuit applications without functional degradation.

Substiute Parts

RC3216F95R3CS

Samsung Electro-MechanicsIn Stock: 730RC3216F95R3CS Datasheet

Current PartRFQ

CR1206-FX-95R3ELF

Bourns Inc.In Stock: 19671CR1206-FX-95R3ELF Datasheet

DirectRFQ

ERJ-8ENF95R3V

Panasonic Electronic ComponentsIn Stock: 21044ERJ-8ENF95R3V Datasheet

DirectRFQ

RC1206FR-0795R3L

YAGEOIn Stock: 19847RC1206FR-0795R3L Datasheet

DirectRFQ

RMCF1206FT95R3

Stackpole Electronics IncIn Stock: 1451RMCF1206FT95R3 Datasheet

DirectRFQ

MCR18ERTF95R3

Rohm SemiconductorIn Stock: 10122MCR18ERTF95R3 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RC3216F95R3CS are qualified based on the following criteria:

Electrical Parameters (Must Match Exactly):

• Resistance value: 95.3 Ohms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C to 155°C

Mechanical Parameters (Must Match Exactly):

• Package type: 1206 (3216 Metric)
• Number of terminations: 2
• Composition: Thick Film

Compliance Parameters (Must Match or Exceed):

• RoHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)
• REACH Unaffected status

All identified substitute parts meet these criteria. Variations in physical dimensions (length, width, height) within the 1206 package specification and differences in product status or special features (such as automotive AEC-Q200 qualification) do not disqualify substitution eligibility when core electrical and mechanical parameters align.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitutes (Active Product Status):

CR1206-FX-95R3ELF (Bourns Inc.), RC1206FR-0795R3L (YAGEO), and RMCF1206FT95R3 (Stackpole Electronics Inc) are recommended as primary substitutes. All three maintain Active product status, ensuring continued availability and manufacturer support. These parts are supplied in Tape & Reel packaging, which is standard for automated assembly operations.

Secondary Substitute (Automotive-Qualified):

RMCF1206FT95R3 carries AEC-Q200 automotive qualification. This part is suitable for applications requiring automotive-grade reliability standards while maintaining all electrical and mechanical equivalence to the RC3216F95R3CS.

Alternative Substitute (Legacy Status):

ERJ-8ENF95R3V (Panasonic Electronic Components) is classified as "Not For New Designs" and carries AEC-Q200 automotive qualification. This part remains electrically and mechanically equivalent but should be reserved for legacy system maintenance or replacement applications where new design qualification is not required.

Discontinued Part (Inventory Consideration):

MCR18ERTF95R3 (Rohm Semiconductor) is discontinued at DiGi Electronics. While electrically and mechanically equivalent, this part should be selected only when existing inventory is available and long-term supply is not a requirement.

Frequently Asked Questions (FAQ)

Q: Can CR1206-FX-95R3ELF replace RC3216F95R3CS in production assembly?

A: Yes. CR1206-FX-95R3ELF meets all electrical specifications (95.3 Ohms ±1%, 0.25W), operates across the identical temperature range (-55°C to 155°C), and is packaged in the same 1206 (3216 Metric) configuration. Both components are ROHS3 compliant with MSL 1 rating. The primary difference is packaging format (Tape & Reel versus Bulk) and manufacturer.

Q: What is the difference between moisture-resistant and automotive AEC-Q200 qualified parts?

A: Moisture-resistant designation indicates the component meets moisture resistance requirements. AEC-Q200 qualification indicates the part meets automotive industry reliability and qualification standards established by the Automotive Electronics Council. RMCF1206FT95R3 and ERJ-8ENF95R3V carry AEC-Q200 qualification, while CR1206-FX-95R3ELF and RC1206FR-0795R3L carry moisture-resistant designation. Both feature sets are compatible with the RC3216F95R3CS electrical function.

Q: Are there dimensional differences between substitute parts?

A: Minor dimensional variations exist within the 1206 package specification. RC3216F95R3CS measures 0.126" L × 0.063" W (3.20mm × 1.60mm) with 0.026" maximum seated height. RC1206FR-0795R3L measures 0.122" L × 0.063" W (3.10mm × 1.60mm) with 0.026" maximum seated height. MCR18ERTF95R3 measures 0.120" L × 0.061" W (3.05mm × 1.55mm) with 0.026" maximum seated height. These variations remain within 1206 package tolerance and do not affect PCB footprint compatibility or circuit function.

Q: Why is ERJ-8ENF95R3V marked "Not For New Designs"?

A: "Not For New Designs" status indicates the manufacturer (Panasonic) has designated this part for legacy applications only. New product development should prioritize parts with Active status. However, ERJ-8ENF95R3V remains electrically and mechanically equivalent and is suitable for replacement in existing systems.

Q: What is MSL 1 rating and why does it matter?

A: Moisture Sensitivity Level (MSL) 1 indicates unlimited shelf life without moisture exposure controls. All identified substitute parts carry MSL 1 rating, meaning they do not require special moisture-barrier packaging or baking procedures prior to soldering. This simplifies inventory management and assembly logistics.