RC3216F9532CS Equivalent & Substitute Parts Reference

Part Overview

The RC3216F9532CS is a 95.3 kOhms ±1% 0.25W chip resistor manufactured by Samsung Electro-Mechanics in 1206 (3216 Metric) package configuration. This thick film, moisture-resistant component operates across -55°C to 155°C with a temperature coefficient of ±100ppm/°C. The part is currently in active production status with 687 units in stock inventory. Equivalent and substitute parts are identified when manufacturers discontinue production lines, supply constraints occur, or design flexibility permits component sourcing from alternative qualified manufacturers while maintaining electrical and mechanical compatibility.

Key Parameters

Parameter	Value	Specification Basis
Resistance Value	95.3 kOhms	Primary electrical specification
Tolerance	±1%	Accuracy requirement for circuit function
Power Rating	0.25W (1/4W)	Thermal dissipation capability
Package Type	1206 (3216 Metric)	PCB footprint and assembly compatibility
Composition	Thick Film	Manufacturing technology and performance characteristics
Temperature Coefficient	±100ppm/°C	Resistance stability over operating range
Operating Temperature Range	-55°C to 155°C	Environmental operating limits
Moisture Resistance	Yes	Environmental protection feature
RoHS Compliance	ROHS3 Compliant	Regulatory requirement
Moisture Sensitivity Level	MSL 1 (Unlimited)	Handling and storage requirements

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict equivalence across all critical parameters. The RC3216F9532CS establishes the baseline specification: 95.3 kOhms resistance, ±1% tolerance, 0.25W power rating, 1206 package, thick film composition, ±100ppm/°C temperature coefficient, -55°C to 155°C operating range, moisture resistance, ROHS3 compliance, and MSL 1 rating.

Substitute parts are classified into two categories:

Direct Substitutes maintain identical electrical specifications and mechanical dimensions within acceptable tolerances. These parts are interchangeable without circuit redesign or PCB modification.

Similar Substitutes meet all core electrical and thermal requirements but may include additional features (such as automotive AEC-Q200 qualification) or minor dimensional variations within the 1206 package envelope. These parts function equivalently in the specified application.

All identified substitutes comply with ROHS3 regulations, maintain MSL 1 rating, and operate within the -55°C to 155°C temperature range with ±100ppm/°C temperature coefficient.

Parameter Comparison

Manufacturer	Part Number	Resistance	Tolerance	Power	Package	Composition	Temp Coeff	Op. Temp Range	Height Max	RoHS	MSL	Product Status
Samsung Electro-Mechanics	RC3216F9532CS	95.3 kΩ	±1%	0.25W	1206	Thick Film	±100ppm/°C	-55°C ~ 155°C	0.66mm	ROHS3	1	Active
Bourns Inc.	CR1206-FX-9532ELF	95.3 kΩ	±1%	0.25W	1206	Thick Film	±100ppm/°C	-55°C ~ 155°C	0.75mm	ROHS3	1	Active
YAGEO	RC1206FR-0795K3L	95.3 kΩ	±1%	0.25W	1206	Thick Film	±100ppm/°C	-55°C ~ 155°C	0.65mm	ROHS3	1	Active
Vishay Dale	CRCW120695K3FKEA	95.3 kΩ	±1%	0.25W	1206	Thick Film	±100ppm/°C	-55°C ~ 155°C	0.60mm	ROHS3	1	Active
Panasonic Electronic Components	ERJ-8ENF9532V	95.3 kΩ	±1%	0.25W	1206	Thick Film	±100ppm/°C	-55°C ~ 155°C	0.70mm	ROHS3	1	Not For New Designs

Engineering Selection Recommendations

CR1206-FX-9532ELF (Bourns Inc.) is a direct substitute with active product status. All electrical parameters match the RC3216F9532CS specification. The maximum seated height of 0.75mm remains within standard 1206 package tolerance and presents no PCB assembly conflict. This part is recommended for applications requiring immediate substitution with equivalent performance characteristics.

RC1206FR-0795K3L (YAGEO) is a direct substitute with active product status. Electrical specifications are identical to the main part. The maximum seated height of 0.65mm is the lowest among all alternatives, providing additional clearance margin in space-constrained PCB layouts. This part is suitable for direct replacement in all applications.

CRCW120695K3FKEA (Vishay Dale) is a similar substitute with active product status and automotive AEC-Q200 qualification. All core electrical parameters match the RC3216F9532CS. The AEC-Q200 rating indicates enhanced reliability testing and qualification for automotive applications. The maximum seated height of 0.60mm provides optimal clearance. This part is appropriate for applications requiring automotive-grade components or enhanced reliability assurance.

ERJ-8ENF9532V (Panasonic Electronic Components) is a similar substitute with "Not For New Designs" product status. While all electrical specifications match the RC3216F9532CS and AEC-Q200 qualification is present, the discontinued design status indicates this part should not be selected for new product development. This part is suitable only for legacy system maintenance or repair applications where existing inventory exists.

Frequently Asked Questions (FAQ)

Q: Can I use CRCW120695K3FKEA in place of RC3216F9532CS in a new design?

A: Yes. The CRCW120695K3FKEA meets all electrical specifications of the RC3216F9532CS (95.3 kΩ, ±1%, 0.25W, 1206 package, ±100ppm/°C, -55°C to 155°C). The additional AEC-Q200 automotive qualification does not create incompatibility; it represents enhanced qualification testing. The part is electrically and mechanically interchangeable.

Q: What is the difference between "Direct Substitute" and "Similar Substitute" classifications?

A: Direct substitutes maintain identical electrical and mechanical specifications without additional features. Similar substitutes meet all core electrical and thermal requirements but include supplementary qualifications (such as automotive AEC-Q200) or minor dimensional variations. Both categories are functionally equivalent for the specified application.

Q: Does the height difference between substitute parts affect PCB assembly?

A: The maximum seated heights range from 0.60mm to 0.75mm across all parts. These variations fall within standard 1206 package tolerance and do not create assembly conflicts. All parts are compatible with standard 1206 PCB footprints and reflow soldering processes.

Q: Why is ERJ-8ENF9532V marked "Not For New Designs"?

A: This designation indicates the manufacturer has discontinued active development and production planning for this part. While the part remains functionally equivalent and available in inventory, it should not be selected for new product development. Use this part only for legacy system maintenance or repair where existing supply exists.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All identified substitute parts carry ROHS3 compliance certification, matching the RC3216F9532CS regulatory status. All parts are also REACH unaffected and classified as EAR99 for export control purposes.

Q: Can I mix different substitute parts within the same PCB assembly?

A: Yes. All substitute parts meet identical electrical specifications and are mechanically compatible with the same 1206 PCB footprint. Mixing different manufacturers' parts within a single assembly does not create functional or reliability issues, provided all parts maintain the specified tolerance, power rating, and temperature coefficient.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message