RC3216F8060CS Equivalent & Substitute Parts Reference

Part Overview

The RC3216F8060CS is a 806 Ohms ±1% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Samsung Electro-Mechanics. This component is classified as Active product status with 869 pieces currently in stock. The part is ROHS3 compliant, moisture resistant, and rated for operating temperatures from -55°C to 155°C with unlimited moisture sensitivity level (MSL 1).

Equivalent and substitute parts are necessary when the primary part becomes unavailable, when supply chain optimization is required, or when design flexibility across multiple qualified manufacturers is needed while maintaining identical electrical and mechanical performance specifications.

Key Parameters

Parameter	Value
Resistance	806 Ohms
Tolerance	±1%
Power Rating	0.25W (1/4W)
Package / Case	1206 (3216 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C to 155°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)
Number of Terminations	2

Substitute Part Grouping Explanation

Substitution eligibility for the RC3216F8060CS is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

Resistance value: 806 Ohms
Tolerance: ±1%
Power rating: 0.25W (1/4W)
Package: 1206 (3216 Metric)
Composition: Thick Film
Temperature coefficient: ±100ppm/°C
Operating temperature range: -55°C to 155°C
RoHS compliance: ROHS3
Moisture sensitivity level: 1 (Unlimited)

Acceptable Variation Parameters:

Physical dimensions (length and width within standard 1206 tolerances)
Height seated maximum (0.024" to 0.028")
Packaging format (Tape & Reel or Cut Tape)
Manufacturer series designation
Product status (Active or Not For New Designs)
Additional certifications (AEC-Q200 automotive qualification)

All identified substitute parts meet these mandatory matching criteria and are therefore electrically and mechanically interchangeable with the RC3216F8060CS in standard applications.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op Temp Range	RoHS	MSL	Product Status	Packaging	Inventory
RC3216F8060CS	Samsung Electro-Mechanics	806 Ω	±1%	0.25	1206	±100ppm/°C	-55 to 155°C	ROHS3	1	Active	-	869
ERJ-8ENF8060V	Panasonic Electronic Components	806 Ω	±1%	0.25	1206	±100ppm/°C	-55 to 155°C	ROHS3	1	Not For New Designs	Tape & Reel	198560
RC1206FR-07806RL	YAGEO	806 Ω	±1%	0.25	1206	±100ppm/°C	-55 to 155°C	ROHS3	1	Active	Tape & Reel	27536
RMCF1206FT806R	Stackpole Electronics Inc	806 Ω	±1%	0.25	1206	±100ppm/°C	-55 to 155°C	ROHS3	1	Active	Tape & Reel	22132
CRCW1206806RFKEA	Vishay Dale	806 Ω	±1%	0.25	1206	±100ppm/°C	-55 to 155°C	ROHS3	1	Active	Tape & Reel	15505
KTR18EZPF8060	Rohm Semiconductor	806 Ω	±1%	0.25	1206	±100ppm/°C	-55 to 155°C	ROHS3	1	Active	Tape & Reel	8515
MCR18ERTF8060	Rohm Semiconductor	806 Ω	±1%	0.25	1206	±100ppm/°C	-55 to 155°C	ROHS3	1	Discontinued at DiGi Electronics	Cut Tape & Digi-Reel	4521

Engineering Selection Recommendations

Primary Substitutes (Active Status):

RC1206FR-07806RL (YAGEO), RMCF1206FT806R (Stackpole Electronics Inc), CRCW1206806RFKEA (Vishay Dale), and KTR18EZPF8060 (Rohm Semiconductor) are all Active product status components with full electrical and mechanical equivalence to the RC3216F8060CS. These parts are suitable for new designs and ongoing production applications.

Secondary Substitute (Not For New Designs):

ERJ-8ENF8060V (Panasonic Electronic Components) is classified as Not For New Designs but remains electrically and mechanically equivalent. This part is appropriate for legacy system maintenance, repair, or replacement applications only.

Discontinued Component:

MCR18ERTF8060 (Rohm Semiconductor) is discontinued at DiGi Electronics and should be used only when existing inventory must be consumed or for repair of existing assemblies. This part is not recommended for new procurement.

Automotive Applications:

RMCF1206FT806R, CRCW1206806RFKEA, and KTR18EZPF8060 carry AEC-Q200 automotive qualification ratings. These parts are suitable for automotive and high-reliability applications requiring automotive-grade component certification.

Selection Priority:

For general industrial applications, select from Active status parts with highest inventory availability. For automotive applications, prioritize AEC-Q200 qualified parts. Verify packaging format (Tape & Reel vs. Cut Tape) matches assembly equipment requirements.

Frequently Asked Questions (FAQ)

Q: Can ERJ-8ENF8060V be used as a direct replacement for RC3216F8060CS?

A: Yes, ERJ-8ENF8060V is electrically and mechanically equivalent. However, it is classified as Not For New Designs. Use this part only for repair, maintenance, or replacement of existing systems where the original part is unavailable.

Q: What is the difference between the substitute parts?

A: All substitute parts share identical electrical specifications (806 Ω, ±1%, 0.25W, ±100ppm/°C, -55°C to 155°C). Differences exist in: manufacturer, product status (Active vs. Not For New Designs vs. Discontinued), physical dimensions (height seated varies from 0.024" to 0.028"), packaging format (Tape & Reel vs. Cut Tape), and certifications (some include AEC-Q200 automotive qualification). These differences do not affect electrical performance in standard applications.

Q: Are the AEC-Q200 qualified parts suitable for non-automotive applications?

A: Yes. AEC-Q200 qualification indicates automotive-grade reliability and testing. Parts meeting this standard exceed standard industrial requirements and are suitable for any application. AEC-Q200 qualified substitutes (RMCF1206FT806R, CRCW1206806RFKEA, KTR18EZPF8060) can replace the RC3216F8060CS in any application context.

Q: Does packaging format (Tape & Reel vs. Cut Tape) affect electrical performance?

A: No. Packaging format affects only handling, storage, and assembly process compatibility. Electrical and mechanical specifications remain identical. Verify that selected packaging format matches your assembly equipment capabilities.

Q: Can I mix different substitute parts in the same assembly?

A: Yes. All substitute parts are electrically and mechanically equivalent to RC3216F8060CS and to each other. Mixing different manufacturers in the same assembly does not affect electrical performance, provided all parts meet the specified parameters (806 Ω, ±1%, 0.25W, 1206 package, ±100ppm/°C, -55°C to 155°C, ROHS3, MSL 1).

Q: Why should I avoid MCR18ERTF8060?

A: MCR18ERTF8060 is discontinued at DiGi Electronics. While electrically equivalent, it should be used only to consume existing inventory or for repair of systems already using this part. For new procurement and new designs, select from Active status alternatives.

Q: What does "Not For New Designs" mean for ERJ-8ENF8060V?

A: This designation indicates the manufacturer has discontinued active promotion and support for new applications. The part remains available and functional but should not be selected for new product designs. Use only for legacy system support or when existing inventory must be utilized.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts are ROHS3 compliant, matching the RC3216F8060CS compliance status. All parts are also REACH unaffected and classified as EAR99 for export control purposes.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message