RC3216F7150CS Equivalent & Substitute Parts Reference

Part Overview

The RC3216F7150CS is a 715 Ohm ±1% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Samsung Electro-Mechanics. This component is classified as Active product status with full RoHS3 compliance and REACH unaffected designation. The part operates across -55°C to 155°C with moisture resistant characteristics and MSL Level 1 rating. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, and environmental compliance requirements.

Substiute Parts

RC3216F7150CS

Samsung Electro-MechanicsIn Stock: 996RC3216F7150CS Datasheet

Current PartRFQ

RC1206FR-07715RL

YAGEOIn Stock: 136293RC1206FR-07715RL Datasheet

DirectRFQ

CRCW1206715RFKEA

Vishay DaleIn Stock: 16658CRCW1206715RFKEA Datasheet

SimilarRFQ

ERJ-8ENF7150V

Panasonic Electronic ComponentsIn Stock: 39158ERJ-8ENF7150V Datasheet

SimilarRFQ

RMCF1206FT715R

Stackpole Electronics IncIn Stock: 21882RMCF1206FT715R Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RC3216F7150CS is determined by strict equivalence across the following critical parameters:

Electrical Specifications: Resistance value of 715 Ohms, tolerance of ±1%, and power rating of 0.25W (1/4W) must be identical across all substitute parts.

Package Compatibility: All substitute parts must use 1206 (3216 Metric) package configuration to ensure PCB footprint compatibility and assembly process alignment.

Material Composition: Thick film construction is required for thermal stability and performance consistency.

Environmental Performance: Temperature coefficient of ±100ppm/°C and operating range of -55°C to 155°C must be maintained.

Compliance Requirements: RoHS3 compliance and REACH unaffected status are mandatory for regulatory alignment.

Moisture Characteristics: MSL Level 1 rating ensures unlimited shelf life and moisture resistance.

Substitute parts are grouped into two categories: Direct Equivalents (identical specifications and features) and Similar Parts (matching core electrical and mechanical parameters with additional certifications such as AEC-Q200 automotive qualification).

Parameter Comparison

Engineering Selection Recommendations

Primary Selection: RC1206FR-07715RL (YAGEO) is the direct equivalent substitute for RC3216F7150CS. Both parts maintain identical electrical specifications, package configuration, and compliance status. YAGEO RC1206FR-07715RL carries Active product status with 136,201 units in stock, ensuring supply continuity.

Automotive Applications: For designs requiring AEC-Q200 automotive qualification, CRCW1206715RFKEA (Vishay Dale) and RMCF1206FT715R (Stackpole Electronics) are qualified substitutes. Both maintain all core electrical and mechanical parameters while adding automotive-grade reliability certification. RMCF1206FT715R is recommended for new automotive designs due to Active product status.

Legacy Design Consideration: ERJ-8ENF7150V (Panasonic Electronic Components) meets all electrical and mechanical requirements but carries Not For New Designs product status. This part is suitable only for sustaining production of existing designs where supply from Active alternatives is unavailable.

Compliance Verification: All substitute parts maintain RoHS3 compliance and REACH unaffected designation, ensuring regulatory alignment with the original RC3216F7150CS specification.

Frequently Asked Questions (FAQ)

Q: Can RC1206FR-07715RL replace RC3216F7150CS in existing designs?

A: Yes. RC1206FR-07715RL is a direct equivalent with identical resistance (715 Ohms), tolerance (±1%), power rating (0.25W), package (1206), temperature coefficient (±100ppm/°C), operating range (-55°C to 155°C), and compliance status (RoHS3, REACH unaffected). Both parts are Active status with MSL Level 1 rating.

Q: What is the difference between the Samsung and YAGEO parts?

A: RC3216F7150CS (Samsung) and RC1206FR-07715RL (YAGEO) are functionally equivalent. Dimensional variations exist: Samsung height is 0.66mm maximum versus YAGEO 0.65mm maximum. Both meet 1206 package specification and are suitable for identical PCB footprints.

Q: Are the Vishay Dale and Stackpole parts suitable for non-automotive applications?

A: Yes. CRCW1206715RFKEA (Vishay Dale) and RMCF1206FT715R (Stackpole) meet all electrical and mechanical requirements for general-purpose applications. AEC-Q200 automotive certification is an additional qualification that does not restrict use in non-automotive designs.

Q: Why is ERJ-8ENF7150V marked as Not For New Designs?

A: ERJ-8ENF7150V carries Not For New Designs status from Panasonic Electronic Components. This designation indicates the manufacturer is not recommending this part for new circuit designs. Use this part only for sustaining production of existing designs where alternative Active-status parts are unavailable.

Q: Do all substitute parts have the same moisture sensitivity level?

A: Yes. All substitute parts carry MSL Level 1 (Unlimited) rating, identical to RC3216F7150CS. This ensures unlimited shelf life and consistent moisture resistance across all equivalent options.

Q: What packaging formats are available for these substitute parts?

A: RC1206FR-07715RL is available in Cut Tape (CT) and Digi-Reel format. CRCW1206715RFKEA is available in Cut Tape (CT) and Digi-Reel format. ERJ-8ENF7150V and RMCF1206FT715R are available in Tape & Reel (TR) format. Packaging selection depends on assembly process requirements.

Q: Are dimensional differences between substitute parts significant for PCB assembly?

A: All parts conform to 1206 (3216 Metric) package specification. Minor height variations (0.60mm to 0.70mm maximum) fall within standard PCB assembly tolerances and do not affect footprint compatibility or reflow soldering processes.