RC3216F57R6CS Equivalent & Substitute Parts Reference

Part Overview

The RC3216F57R6CS is a 57.6 Ohm ±1% 0.25W thick film chip resistor manufactured by Samsung Electro-Mechanics in 1206 (3216 Metric) package format. This component is classified as Active product status with moisture resistant construction and ROHS3 compliance. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and environmental ratings align with the original component's functional requirements.

Substiute Parts

RC3216F57R6CS

Samsung Electro-MechanicsIn Stock: 841RC3216F57R6CS Datasheet

Current PartRFQ

RC1206FR-0757R6L

YAGEOIn Stock: 10714RC1206FR-0757R6L Datasheet

DirectRFQ

CRCW120657R6FKEA

Vishay DaleIn Stock: 23699CRCW120657R6FKEA Datasheet

SimilarRFQ

ERJ-8ENF57R6V

Panasonic Electronic ComponentsIn Stock: 72099ERJ-8ENF57R6V Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RC3216F57R6CS are qualified based on the following criteria:

Electrical Parameters (Must Match):

• Resistance value: 57.6 Ohms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C

Mechanical Parameters (Must Match):

• Package type: 1206 (3216 Metric)
• Number of terminations: 2
• Composition: Thick Film

Compliance & Environmental (Must Match or Exceed):

• RoHS3 Compliant
• Moisture Sensitivity Level: MSL 1 (Unlimited)
• REACH Unaffected status

Three substitute parts meet these criteria across different manufacturers, with variations in physical dimensions and product status noted.

Parameter Comparison

Engineering Selection Recommendations

RC1206FR-0757R6L (YAGEO) is the primary direct substitute. This part maintains Active product status with identical electrical and mechanical specifications. The component is available in Tape & Reel packaging with high inventory availability (10,673 pcs).

CRCW120657R6FKEA (Vishay Dale) qualifies as a substitute with additional automotive AEC-Q200 qualification. This part is suitable for applications requiring automotive-grade reliability. Active product status and high inventory (23,618 pcs) support production continuity.

ERJ-8ENF57R6V (Panasonic Electronic Components) meets all electrical and mechanical substitution criteria with AEC-Q200 automotive qualification. However, this part carries "Not For New Designs" product status, indicating it is in mature/declining phase. Use is limited to legacy design support or existing production lines where supply continuity is established. Inventory availability is highest (72,050 pcs).

Frequently Asked Questions (FAQ)

Q: Can RC1206FR-0757R6L replace RC3216F57R6CS in existing designs?

A: Yes. Both components share identical resistance value (57.6 Ohms), tolerance (±1%), power rating (0.25W), package format (1206), composition (thick film), temperature coefficient (±100ppm/°C), and operating range (-55°C ~ 155°C). Both maintain MSL 1 rating and ROHS3 compliance. Physical dimensions vary slightly (3.10mm vs 3.20mm length; 0.65mm vs 0.66mm height), but remain within 1206 package specification tolerances.

Q: What is the difference between CRCW120657R6FKEA and ERJ-8ENF57R6V?

A: Both parts are electrically and mechanically equivalent to the main part. CRCW120657R6FKEA maintains Active product status, while ERJ-8ENF57R6V is designated "Not For New Designs." For new product development, CRCW120657R6FKEA is the preferred choice. ERJ-8ENF57R6V is suitable only for legacy production support where existing supply agreements exist.

Q: Are automotive-qualified versions (AEC-Q200) compatible with non-automotive applications?

A: Yes. CRCW120657R6FKEA and ERJ-8ENF57R6V carry AEC-Q200 automotive qualification, which represents enhanced reliability testing. These parts are fully compatible with non-automotive applications and may be used as direct substitutes without functional or performance degradation.

Q: What packaging formats are available for these substitutes?

A: RC1206FR-0757R6L, CRCW120657R6FKEA, and ERJ-8ENF57R6V are all supplied in Tape & Reel (TR) format. The original RC3216F57R6CS packaging format is not specified in the provided data. Verify packaging compatibility with your assembly equipment before procurement.

Q: Are there any dimensional constraints when substituting these parts?

A: All substitute parts conform to 1206 (3216 Metric) package specification. Minor variations exist in seated height (0.60mm to 0.70mm range) and length (3.10mm to 3.20mm range), but these fall within standard 1206 package tolerances. No design modifications are required for PCB layout or assembly processes.