RC3216F5362CS Equivalent & Substitute Parts Reference

Part Overview

The RC3216F5362CS is a 53.6 kOhms ±1% thick film chip resistor manufactured by Samsung Electro-Mechanics in the 1206 (3216 Metric) package format with 0.25W power rating. This component is classified as Active product status with full RoHS3 compliance and unlimited moisture sensitivity level (MSL 1). The part is specified for general-purpose applications requiring precision resistive elements across the -55°C to 155°C operating temperature range.

Equivalent and substitute parts are necessary when the primary manufacturer part becomes unavailable, when supply chain optimization is required, or when design specifications allow for alternative qualified sources meeting identical electrical and mechanical parameters.

Key Parameters

Parameter	Specification
Resistance Value	53.6 kOhms
Tolerance	±1%
Power Rating	0.25W (1/4W)
Package / Case	1206 (3216 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C to 155°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	MSL 1 (Unlimited)
Number of Terminations	2

Substitute Part Grouping Explanation

Substitution eligibility for the RC3216F5362CS is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

Resistance value: 53.6 kOhms
Tolerance: ±1%
Power rating: 0.25W
Package format: 1206 (3216 Metric)
Composition: Thick Film
Temperature coefficient: ±100ppm/°C
Operating temperature range: -55°C to 155°C
RoHS3 compliance
MSL rating: 1 (Unlimited)

All substitute parts listed below meet these mandatory electrical and mechanical parameters. Variations in physical dimensions (length, width, height) within standard tolerances, packaging format (Tape & Reel vs. Cut Tape), and additional certifications (such as AEC-Q200 automotive qualification) do not disqualify a part from substitution eligibility when the core electrical specifications remain identical.

Parameter Comparison

Manufacturer	Part Number	Resistance	Tolerance	Power	Package	Temp Coeff	Op. Temp Range	RoHS3	MSL	Product Status	Packaging Type
Samsung Electro-Mechanics	RC3216F5362CS	53.6 kΩ	±1%	0.25W	1206	±100ppm/°C	-55°C ~ 155°C	Yes	1	Active	-
Panasonic Electronic Components	ERJ-8ENF5362V	53.6 kΩ	±1%	0.25W	1206	±100ppm/°C	-55°C ~ 155°C	Yes	1	Not For New Designs	Tape & Reel
YAGEO	RC1206FR-0753K6L	53.6 kΩ	±1%	0.25W	1206	±100ppm/°C	-55°C ~ 155°C	Yes	1	Active	Tape & Reel
Stackpole Electronics Inc	RMCF1206FT53K6	53.6 kΩ	±1%	0.25W	1206	±100ppm/°C	-55°C ~ 155°C	Yes	1	Active	Tape & Reel
Vishay Dale	CRCW120653K6FKEA	53.6 kΩ	±1%	0.25W	1206	±100ppm/°C	-55°C ~ 155°C	Yes	1	Active	Tape & Reel
Rohm Semiconductor	KTR18EZPF5362	53.6 kΩ	±1%	0.25W	1206	±100ppm/°C	-55°C ~ 155°C	Yes	1	Active	Tape & Reel
Rohm Semiconductor	MCR18ERTF5362	53.6 kΩ	±1%	0.25W	1206	±100ppm/°C	-55°C ~ 155°C	Yes	1	Discontinued at DiGi Electronics	Cut Tape & Digi-Reel

Engineering Selection Recommendations

Active Status Parts (Recommended for New Designs):

RC1206FR-0753K6L (YAGEO), RMCF1206FT53K6 (Stackpole Electronics Inc), CRCW120653K6FKEA (Vishay Dale), and KTR18EZPF5362 (Rohm Semiconductor) are all classified as Active product status, indicating ongoing manufacturer support and availability. These parts are suitable for new design implementations and long-term production requirements.

Automotive-Qualified Alternatives:

RMCF1206FT53K6, CRCW120653K6FKEA, and KTR18EZPF5362 carry AEC-Q200 automotive qualification. These parts are appropriate for applications requiring automotive-grade reliability and traceability, even in non-automotive end-use scenarios where enhanced quality assurance is beneficial.

Legacy and Discontinued Parts:

ERJ-8ENF5362V (Panasonic) is marked "Not For New Designs" and MCR18ERTF5362 (Rohm) is "Discontinued at DiGi Electronics." These parts remain electrically and mechanically equivalent but should be used only for legacy system maintenance, repair, or replacement scenarios where design continuity with existing assemblies is required.

Packaging Considerations:

All substitute parts are available in Tape & Reel packaging except MCR18ERTF5362, which is supplied in Cut Tape & Digi-Reel format. Tape & Reel packaging is standard for automated assembly operations. Cut Tape format is suitable for manual assembly or low-volume applications.

Frequently Asked Questions (FAQ)

Q: Can I substitute RC3216F5362CS with any of the listed parts in existing designs?

A: Yes. All listed substitute parts meet identical electrical specifications (53.6 kOhms ±1%, 0.25W, ±100ppm/°C, -55°C to 155°C) and mechanical requirements (1206 package, 2 terminations, RoHS3 compliant, MSL 1). Physical dimension variations within standard tolerances do not affect circuit performance or PCB assembly compatibility.

Q: What is the difference between "Active" and "Not For New Designs" product status?

A: Active status indicates the manufacturer continues production and supports the part for new applications. "Not For New Designs" indicates the manufacturer has discontinued active development but may continue limited production for legacy support. For new circuit designs, select only Active status parts: RC1206FR-0753K6L, RMCF1206FT53K6, CRCW120653K6FKEA, or KTR18EZPF5362.

Q: Does AEC-Q200 certification affect substitution eligibility?

A: No. AEC-Q200 is an additional automotive qualification that does not change the core electrical or mechanical parameters. Parts with AEC-Q200 (RMCF1206FT53K6, CRCW120653K6FKEA, KTR18EZPF5362) are fully substitutable with non-automotive-qualified equivalents. AEC-Q200 certification provides additional quality assurance suitable for demanding applications.

Q: Are there dimensional differences between substitute parts?

A: Minor dimensional variations exist within standard tolerances. Length ranges from 0.120" to 0.126" (3.05mm to 3.20mm), width is consistently 0.063" (1.60mm), and height ranges from 0.024" to 0.028" (0.60mm to 0.70mm). These variations are within PCB design tolerances and do not affect assembly or electrical performance.

Q: Which substitute part offers the best availability?

A: CRCW120653K6FKEA (Vishay Dale) shows the highest inventory level at 19,859 pieces. RC1206FR-0753K6L (YAGEO) has 9,313 pieces available. Both are Active status parts with immediate availability for production requirements.

Q: Can I use MCR18ERTF5362 for new production?

A: MCR18ERTF5362 is marked "Discontinued at DiGi Electronics" and should not be selected for new production designs. Use this part only for repair or replacement of existing assemblies where design continuity is required. For new production, select from the Active status alternatives.

Q: What is MSL 1 (Unlimited) moisture sensitivity?

A: MSL 1 indicates the component has unlimited shelf life and requires no special moisture control during storage or handling. This is the least restrictive moisture sensitivity rating and simplifies supply chain management and assembly operations.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message