RC3216F5360CS Equivalent & Substitute Parts Reference

Part Overview

The RC3216F5360CS is a 536 Ohm ±1% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Samsung Electro-Mechanics. This component is classified as Active product status with 1090 pieces currently in stock. The part is designed for general-purpose applications requiring moisture-resistant thick film construction with RoHS3 compliance and unlimited moisture sensitivity level (MSL 1).

Substitute parts are necessary when the primary manufacturer part becomes unavailable, when supply chain optimization is required, or when design flexibility across multiple qualified suppliers is needed while maintaining identical electrical and mechanical specifications.

Substiute Parts

RC3216F5360CS

Samsung Electro-MechanicsIn Stock: 1113RC3216F5360CS Datasheet

Current PartRFQ

RC1206FR-07536RL

YAGEOIn Stock: 90000RC1206FR-07536RL Datasheet

DirectRFQ

CRCW1206536RFKEA

Vishay DaleIn Stock: 27221CRCW1206536RFKEA Datasheet

SimilarRFQ

ERJ-8ENF5360V

Panasonic Electronic ComponentsIn Stock: 46206ERJ-8ENF5360V Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RC3216F5360CS is determined by strict equivalence across the following critical parameters:

Electrical Parameters (Must Match Exactly):

• Resistance value: 536 Ohms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C

Mechanical Parameters (Must Match Exactly):

• Package type: 1206 (3216 Metric)
• Number of terminations: 2
• Composition: Thick Film

Compliance Parameters (Must Match or Exceed):

• RoHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)
• REACH Unaffected status

All substitute parts listed below meet these criteria. Substitute parts are grouped into two categories: Direct Manufacturer Substitutes (functionally identical, different manufacturer) and Similar Manufacturer Substitutes (functionally identical with additional certifications or features).

Parameter Comparison

Engineering Selection Recommendations

RC1206FR-07536RL (YAGEO): This part is the primary direct substitute. It maintains Active product status, identical electrical specifications, and full RoHS3 compliance. The part is available in significantly higher inventory (89913 pieces) with Tape & Reel packaging suitable for automated assembly. Dimensions are within acceptable tolerance (3.10mm L vs. 3.20mm L for the main part). This substitute is recommended for new designs and production applications.

CRCW1206536RFKEA (Vishay Dale): This part qualifies as a direct electrical substitute with the additional qualification of AEC-Q200 automotive certification. It maintains Active product status and identical electrical parameters. The height specification is slightly lower (0.024" vs. 0.026" maximum). This substitute is suitable for applications requiring automotive-grade reliability or when Vishay Dale supply chain preference is established.

ERJ-8ENF5360V (Panasonic Electronic Components): This part meets all electrical and mechanical substitution criteria and includes AEC-Q200 automotive certification. However, the product status is classified as "Not For New Designs." This part is suitable only for replacement, repair, or legacy system applications where existing design qualification has been established. The height specification is slightly higher (0.028" vs. 0.026" maximum). This substitute should not be selected for new product development.

Frequently Asked Questions (FAQ)

Q: Can RC1206FR-07536RL replace RC3216F5360CS in existing designs?

A: Yes. RC1206FR-07536RL is electrically and mechanically equivalent. Both parts share identical resistance (536 Ohms), tolerance (±1%), power rating (0.25W), temperature coefficient (±100ppm/°C), operating range (-55°C ~ 155°C), and package type (1206). Both are RoHS3 compliant with MSL 1 rating. The primary difference is manufacturer (YAGEO vs. Samsung) and packaging format (Tape & Reel vs. Bulk).

Q: What is the difference between the three substitute parts?

A: All three substitutes are electrically identical to the main part. RC1206FR-07536RL (YAGEO) is a direct general-purpose substitute with Active status. CRCW1206536RFKEA (Vishay Dale) and ERJ-8ENF5360V (Panasonic) both include AEC-Q200 automotive certification. The key distinction is product status: YAGEO and Vishay Dale parts are Active, while Panasonic's ERJ-8ENF5360V is classified as "Not For New Designs."

Q: Are there any dimensional differences between these parts?

A: Minor dimensional variations exist within acceptable tolerances. Length ranges from 3.10mm (YAGEO) to 3.20mm (Samsung and Panasonic). Height ranges from 0.60mm (Vishay Dale) to 0.70mm (Panasonic), with Samsung at 0.66mm. These variations are within standard PCB design tolerances and do not affect functional compatibility in 1206 package footprints.

Q: Which substitute should I select for a new product design?

A: RC1206FR-07536RL (YAGEO) is the recommended choice for new designs. It maintains Active product status, offers the highest inventory availability (89913 pieces), and provides standard Tape & Reel packaging optimized for automated manufacturing. If automotive-grade reliability is required, CRCW1206536RFKEA (Vishay Dale) with AEC-Q200 certification is the appropriate selection.

Q: Why is ERJ-8ENF5360V marked "Not For New Designs"?

A: The "Not For New Designs" status indicates that Panasonic has discontinued active development and promotion of this part number. While the part remains functionally equivalent and available in inventory (46116 pieces), it is intended for legacy system support and replacement applications only. New product designs should utilize RC1206FR-07536RL or CRCW1206536RFKEA.

Q: Are all these parts RoHS3 compliant?

A: Yes. All four parts (RC3216F5360CS, RC1206FR-07536RL, CRCW1206536RFKEA, and ERJ-8ENF5360V) are RoHS3 compliant with REACH Unaffected status and ECCN EAR99 classification. All parts carry MSL 1 (Unlimited) moisture sensitivity rating.

Q: Can I mix different manufacturers in the same assembly?

A: Yes. All substitute parts meet identical electrical and mechanical specifications. PCB assembly processes can accommodate parts from different manufacturers within the same design. However, for supply chain consistency and traceability, it is common practice to qualify a single primary source with documented alternates.