RC3216F5232CS Equivalent & Substitute Parts

Part Overview

The RC3216F5232CS is a 52.3 kOhms ±1% 0.25W thick film chip resistor manufactured by Samsung Electro-Mechanics in 1206 (3216 Metric) package format. This component is classified as Active product status and features moisture-resistant construction with ROHS3 compliance. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and environmental ratings are maintained across alternative manufacturers while accommodating specific application requirements such as automotive qualification or packaging preferences.

Substiute Parts

RC3216F5232CS

Samsung Electro-MechanicsIn Stock: 867RC3216F5232CS Datasheet

Current PartRFQ

ERJ-8ENF5232V

Panasonic Electronic ComponentsIn Stock: 11084ERJ-8ENF5232V Datasheet

DirectRFQ

RC1206FR-0752K3L

YAGEOIn Stock: 10336RC1206FR-0752K3L Datasheet

DirectRFQ

RMCF1206FT52K3

Stackpole Electronics IncIn Stock: 1974RMCF1206FT52K3 Datasheet

DirectRFQ

CRCW120652K3FKEA

Vishay DaleIn Stock: 25507CRCW120652K3FKEA Datasheet

SimilarRFQ

KTR18EZPF5232

Rohm SemiconductorIn Stock: 5909KTR18EZPF5232 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RC3216F5232CS are qualified based on the following criteria:

Electrical Parameters (Must Match):

• Resistance value: 52.3 kOhms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C

Mechanical Parameters (Must Match):

• Package type: 1206 (3216 Metric)
• Number of terminations: 2
• Composition: Thick Film

Compliance & Environmental (Must Match):

• RoHS3 compliance
• Moisture Sensitivity Level: 1 (Unlimited)
• REACH Unaffected status

Packaging Format: Substitutes are available in Tape & Reel (TR) format, which is compatible with automated assembly processes.

Additional Qualifications: Certain substitute parts include automotive AEC-Q200 certification or high voltage features, which represent enhanced specifications beyond the base requirements and do not preclude substitution.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitutes (Active Product Status):

RC1206FR-0752K3L (YAGEO), RMCF1206FT52K3 (Stackpole Electronics Inc), CRCW120652K3FKEA (Vishay Dale), and KTR18EZPF5232 (Rohm Semiconductor) are all classified as Active products and maintain full electrical and mechanical equivalence to the RC3216F5232CS. These parts are suitable for new designs and ongoing production applications.

Secondary Substitute (Not For New Designs):

ERJ-8ENF5232V (Panasonic Electronic Components) meets all electrical and mechanical specifications but carries a "Not For New Designs" product status designation. This part is suitable for replacement and maintenance applications only and should not be selected for new circuit designs.

Automotive Applications:

RMCF1206FT52K3, CRCW120652K3FKEA, and KTR18EZPF5232 include AEC-Q200 automotive qualification. KTR18EZPF5232 additionally features high voltage capability. These parts are appropriate for automotive and high-reliability applications where such certifications are required.

Packaging Considerations:

The main part RC3216F5232CS is supplied in bulk packaging. All substitute parts are available in Tape & Reel (TR) format, which is standard for automated assembly processes. Tape & Reel packaging is compatible with pick-and-place equipment and does not affect electrical or mechanical performance.

Frequently Asked Questions (FAQ)

Q: Can ERJ-8ENF5232V be used as a direct replacement for RC3216F5232CS?

A: ERJ-8ENF5232V meets all electrical and mechanical specifications for direct substitution. However, it carries a "Not For New Designs" product status. It is suitable for replacement in existing applications but should not be selected for new circuit designs.

Q: What is the difference between the main part and substitute parts in terms of physical dimensions?

A: All parts use the 1206 (3216 Metric) package. Minor variations exist in seated height: RC3216F5232CS and RC1206FR-0752K3L measure 0.026" (0.65mm), while ERJ-8ENF5232V, RMCF1206FT52K3, and KTR18EZPF5232 measure 0.028" (0.70mm), and CRCW120652K3FKEA measures 0.024" (0.60mm). These variations are within standard 1206 package tolerances and do not affect circuit board layout or assembly.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All listed substitute parts, including RC3216F5232CS, are ROHS3 compliant and REACH unaffected.

Q: Which substitute parts are suitable for automotive applications?

A: RMCF1206FT52K3 (Stackpole Electronics Inc), CRCW120652K3FKEA (Vishay Dale), and KTR18EZPF5232 (Rohm Semiconductor) carry AEC-Q200 automotive qualification. KTR18EZPF5232 additionally features high voltage capability for demanding automotive environments.

Q: What is the Moisture Sensitivity Level (MSL) for all parts?

A: All parts, including the main part and all substitutes, have MSL rating of 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.

Q: Can substitute parts be mixed in the same production batch?

A: Yes. All substitute parts meet identical electrical specifications (52.3 kOhms ±1%, 0.25W, ±100ppm/°C, -55°C ~ 155°C operating range) and mechanical requirements (1206 package, 2 terminations, thick film composition). They are electrically and mechanically interchangeable within the same circuit design.

Q: What packaging formats are available?

A: The main part RC3216F5232CS is supplied in bulk packaging. All substitute parts are available in Tape & Reel (TR) format, which is standard for automated assembly and compatible with pick-and-place equipment.

Q: Are there any performance differences between manufacturers?

A: All parts meet the same electrical and environmental specifications. Differences are limited to product status, packaging format, and optional certifications (such as AEC-Q200 automotive qualification). Selection should be based on application requirements, product availability, and supply chain considerations.