RC3216F334CS 330kΩ ±1% 1/4W 1206 Chip Resistor Equivalent & Substitute Parts

Part Overview

The RC3216F334CS is a 330 kilohm thick film chip resistor manufactured by Samsung Electro-Mechanics in the 1206 (3216 metric) surface mount package. This component is rated for 0.25W power dissipation with ±1% tolerance and operates across the temperature range of -55°C to 155°C. The part is ROHS3 compliant and carries Moisture Sensitivity Level 1 (unlimited shelf life). The RC3216F334CS remains in active production status with 823 units currently in stock. Equivalent and substitute parts are necessary when the primary manufacturer part becomes unavailable, when supply chain constraints require alternative sourcing, or when design specifications permit the use of functionally equivalent components from alternative manufacturers.

Key Parameters

Parameter	Value	Specification Basis
Resistance Value	330 kΩ	Core electrical specification
Tolerance	±1%	Precision requirement
Power Rating	0.25W (1/4W)	Thermal dissipation capacity
Package Type	1206 (3216 Metric)	Physical footprint and mounting
Composition	Thick Film	Manufacturing technology
Temperature Coefficient	±100 ppm/°C	Stability over temperature range
Operating Temperature Range	-55°C to 155°C	Environmental operating limits
RoHS Status	ROHS3 Compliant	Environmental and regulatory compliance
Moisture Sensitivity Level	MSL 1 (Unlimited)	Storage and handling requirements
Number of Terminations	2	Standard two-terminal resistor configuration

Substitute Part Grouping Explanation

Substitution eligibility for the RC3216F334CS is determined by strict equivalence across all critical electrical and mechanical parameters. The following parameters must match exactly or fall within the specified tolerance bands:

Mandatory Matching Parameters:

Resistance value: 330 kΩ (exact match required)
Tolerance: ±1% (exact match required)
Package designation: 1206 (3216 Metric) (exact match required)
Composition: Thick Film (exact match required)
Temperature coefficient: ±100 ppm/°C (exact match required)
Operating temperature range: -55°C to 155°C (exact match required)
RoHS compliance: ROHS3 (exact match required)
Moisture Sensitivity Level: MSL 1 (exact match required)

Allowable Variations:

Power rating: Substitute parts may equal or exceed 0.25W (higher power ratings are acceptable as they provide additional thermal margin)
Physical dimensions: Minor variations in length, width, and height are acceptable provided the 1206 package footprint is maintained and components remain PCB-compatible
Packaging format: Cut Tape, Tape & Reel, or Digi-Reel formats are interchangeable for design purposes
Additional features: Automotive AEC-Q200 certification, moisture resistance, or pulse withstanding capability may be present in substitute parts without affecting substitution validity

Substitute parts are classified as either "Direct" (functionally identical across all parameters) or "Similar" (functionally equivalent with enhanced features or slightly different power ratings).

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op. Temp Range	RoHS	MSL	Product Status
RC3216F334CS	Samsung Electro-Mechanics	330 kΩ	±1%	0.25	1206	±100 ppm/°C	-55 to 155°C	ROHS3	1	Active
CR1206-FX-3303ELF	Bourns Inc.	330 kΩ	±1%	0.25	1206	±100 ppm/°C	-55 to 155°C	ROHS3	1	Active
ERJ-8ENF3303V	Panasonic Electronic Components	330 kΩ	±1%	0.25	1206	±100 ppm/°C	-55 to 155°C	ROHS3	1	Not For New Designs
RC1206FR-07330KL	YAGEO	330 kΩ	±1%	0.25	1206	±100 ppm/°C	-55 to 155°C	ROHS3	1	Active
RMCF1206FT330K	Stackpole Electronics Inc	330 kΩ	±1%	0.25	1206	±100 ppm/°C	-55 to 155°C	ROHS3	1	Active
AC1206FR-07330KL	YAGEO	330 kΩ	±1%	0.25	1206	±100 ppm/°C	-55 to 155°C	ROHS3	1	Active
CRCW1206330KFKEA	Vishay Dale	330 kΩ	±1%	0.25	1206	±100 ppm/°C	-55 to 155°C	ROHS3	1	Active
CRCW1206330KFKEAHP	Vishay Dale	330 kΩ	±1%	0.75	1206	±100 ppm/°C	-55 to 155°C	ROHS3	1	Active
KTR18EZPF3303	Rohm Semiconductor	330 kΩ	±1%	0.25	1206	±100 ppm/°C	-55 to 155°C	ROHS3	1	Active
MCR18ERTF3303	Rohm Semiconductor	330 kΩ	±1%	0.25	1206	±100 ppm/°C	-55 to 155°C	ROHS3	1	Discontinued at DiGi Electronics

Engineering Selection Recommendations

Direct Substitutes (Functionally Identical):

The following parts are direct substitutes for the RC3216F334CS and maintain complete electrical and mechanical equivalence:

CR1206-FX-3303ELF (Bourns Inc.): Active product status with 33,973 units in stock. Identical specifications across all parameters. Packaged in Tape & Reel format.
RC1206FR-07330KL (YAGEO): Active product status with 245,903 units in stock. Highest inventory availability among all substitutes. Packaged in Cut Tape and Digi-Reel format.
RMCF1206FT330K (Stackpole Electronics Inc): Active product status with 555,323 units in stock. Largest inventory position. Includes AEC-Q200 automotive qualification. Packaged in Tape & Reel format.
CRCW1206330KFKEA (Vishay Dale): Active product status with 21,359 units in stock. Includes AEC-Q200 automotive qualification. Packaged in Tape & Reel format.
KTR18EZPF3303 (Rohm Semiconductor): Active product status with 282,479 units in stock. Includes AEC-Q200 automotive qualification and high voltage capability. Packaged in Tape & Reel format.

Similar Substitutes (Enhanced Specifications):

AC1206FR-07330KL (YAGEO): Active product status with 12,625 units in stock. Combines AEC-Q200 automotive qualification with moisture resistance. Functionally equivalent with enhanced environmental protection.
CRCW1206330KFKEAHP (Vishay Dale): Active product status with 3,370 units in stock. Rated for 0.75W power dissipation (three times the original specification) with pulse withstanding capability. Suitable for applications requiring higher thermal margin or pulse tolerance. Includes AEC-Q200 automotive qualification.

Parts to Avoid:

ERJ-8ENF3303V (Panasonic Electronic Components): Marked as "Not For New Designs." Although functionally equivalent, this part is in end-of-life status and should not be selected for new circuit designs.
MCR18ERTF3303 (Rohm Semiconductor): Discontinued at DiGi Electronics with only 878 units remaining in stock. Not recommended for new designs or long-term production requirements.

Selection Criteria:

For applications requiring maximum supply chain stability, select RMCF1206FT330K (Stackpole) or RC1206FR-07330KL (YAGEO) based on highest inventory levels. For automotive applications, select any part with AEC-Q200 certification (RMCF1206FT330K, AC1206FR-07330KL, CRCW1206330KFKEA, or KTR18EZPF3303). For applications with thermal constraints or pulse requirements, select CRCW1206330KFKEAHP. For standard commercial applications without automotive requirements, CR1206-FX-3303ELF or RC1206FR-07330KL provide optimal balance of availability and cost.

Frequently Asked Questions (FAQ)

Q: Can I substitute the RC3216F334CS with a part rated for higher power dissipation?

A: Yes. The CRCW1206330KFKEAHP is rated for 0.75W (3/4W) compared to the original 0.25W (1/4W) specification. Higher power ratings provide additional thermal margin and are electrically compatible. The component will occupy the same PCB footprint and maintain all other electrical parameters. This substitution is valid for any application where the original 0.25W rating was sufficient.

Q: What is the difference between "Direct" and "Similar" substitute classifications?

A: Direct substitutes maintain identical specifications across all electrical and mechanical parameters. Similar substitutes are functionally equivalent but include enhanced features such as automotive AEC-Q200 certification, higher power ratings, or additional environmental protection. Both categories are valid substitutes; the choice depends on application requirements and cost considerations.

Q: Are all substitute parts compatible with the same PCB footprint?

A: Yes. All listed substitute parts use the 1206 (3216 Metric) package designation and maintain the same PCB footprint. Minor variations in physical dimensions (length, width, height) exist between manufacturers but remain within the 1206 package specification envelope. Components are mechanically interchangeable on standard PCB layouts.

Q: Which substitute part has the best supply chain availability?

A: RMCF1206FT330K (Stackpole Electronics Inc) offers the highest inventory position with 555,323 units in stock. RC1206FR-07330KL (YAGEO) is the second choice with 245,903 units. Both parts are in active production status and represent optimal selections for applications requiring long-term supply security.

Q: Can I use an AEC-Q200 qualified part in a non-automotive application?

A: Yes. AEC-Q200 certification indicates automotive-grade reliability and environmental testing. Parts with this certification exceed standard commercial specifications and are fully compatible with non-automotive applications. Using AEC-Q200 qualified parts in commercial designs provides enhanced reliability without any compatibility issues.

Q: What is Moisture Sensitivity Level (MSL) and why is it important?

A: MSL 1 (Unlimited) indicates that the component has unlimited shelf life and requires no special moisture control during storage or handling. All listed substitute parts carry MSL 1 rating, eliminating the need for dry-pack storage, baking procedures, or time-limited shelf life management. This simplifies inventory management and reduces handling costs.

Q: Are there any tolerance or temperature coefficient differences between substitute parts?

A: No. All substitute parts maintain ±1% tolerance and ±100 ppm/°C temperature coefficient, identical to the RC3216F334CS. These specifications are fundamental to the 330kΩ 1206 resistor category and do not vary among qualified manufacturers.

Q: Should I select a substitute based on packaging format (Tape & Reel vs. Cut Tape)?

A: Packaging format selection depends on assembly process requirements, not electrical compatibility. Tape & Reel format is standard for automated pick-and-place assembly. Cut Tape and Digi-Reel formats are suitable for manual assembly or lower-volume production. All formats contain electrically identical components and are interchangeable from a design perspective.

Q: Why is the ERJ-8ENF3303V marked as "Not For New Designs"?

A: This designation indicates that Panasonic has discontinued active development and marketing of this part number. While existing inventory may be available, the manufacturer does not recommend its use in new circuit designs due to uncertain long-term availability and potential future discontinuation. New designs should select from parts with "Active" product status.

Q: Can I mix different substitute part manufacturers on the same PCB?

A: Yes. All substitute parts meet identical electrical and mechanical specifications. Mixing manufacturers on the same PCB is electrically valid and commonly practiced in production environments. This approach provides supply chain flexibility and reduces dependency on single-source components.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message