RC3216F3320CS Equivalent & Substitute Parts Reference

Part Overview

The RC3216F3320CS is a 332 Ohm ±1% 0.25W thick film chip resistor manufactured by Samsung Electro-Mechanics in 1206 (3216 Metric) package format. This component is classified as Active product status with moisture-resistant construction and ROHS3 compliance. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, and environmental ratings to ensure direct functional interchangeability in circuit applications.

Substiute Parts

RC3216F3320CS

Samsung Electro-MechanicsIn Stock: 739RC3216F3320CS Datasheet

Current PartRFQ

CR1206-FX-3320ELF

Bourns Inc.In Stock: 34747CR1206-FX-3320ELF Datasheet

DirectRFQ

RC1206FR-07332RL

YAGEOIn Stock: 163902RC1206FR-07332RL Datasheet

DirectRFQ

AC1206FR-07332RL

YAGEOIn Stock: 6205AC1206FR-07332RL Datasheet

UpgradeRFQ

CRCW1206332RFKEA

Vishay DaleIn Stock: 29866CRCW1206332RFKEA Datasheet

SimilarRFQ

CRCW1206332RFKEAHP

Vishay DaleIn Stock: 14955CRCW1206332RFKEAHP Datasheet

SimilarRFQ

ERJ-8ENF3320V

Panasonic Electronic ComponentsIn Stock: 60917ERJ-8ENF3320V Datasheet

SimilarRFQ

RMCF1206FT332R

Stackpole Electronics IncIn Stock: 29480RMCF1206FT332R Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RC3216F3320CS are classified based on strict adherence to the following electrical and mechanical parameters:

Primary Substitution Criteria:

• Resistance value: 332 Ohms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W) or higher
• Package: 1206 (3216 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C to +155°C
• Termination count: 2
• RoHS3 compliance

Substitution Categories:

Direct Equivalents maintain all electrical and mechanical specifications identical to the main part with standard industrial ratings.

Upgrade Substitutes provide enhanced features such as automotive AEC-Q200 qualification while maintaining core electrical parameters and package compatibility.

Similar Substitutes meet all core electrical specifications and package requirements but may include additional certifications or enhanced power handling capabilities.

Parameter Comparison

Engineering Selection Recommendations

For Standard Industrial Applications: CR1206-FX-3320ELF (Bourns Inc.) and RC1206FR-07332RL (YAGEO) provide direct electrical and mechanical equivalence to the RC3216F3320CS with Active product status and full ROHS3 compliance. These parts are suitable for applications where automotive qualification is not required.

For Automotive Applications: AC1206FR-07332RL (YAGEO), CRCW1206332RFKEA (Vishay Dale), and RMCF1206FT332R (Stackpole Electronics Inc) are qualified to AEC-Q200 automotive standards while maintaining identical electrical specifications and 1206 package compatibility. These components are recommended for automotive circuit designs requiring enhanced reliability qualification.

For Enhanced Power Margin Applications: CRCW1206332RFKEAHP (Vishay Dale) provides 0.75W power rating with pulse withstanding capability and AEC-Q200 qualification. This part is suitable for applications requiring higher power dissipation margin while maintaining the same 332 Ohm resistance and 1206 package format.

Parts to Avoid for New Designs: ERJ-8ENF3320V (Panasonic Electronic Components) carries "Not For New Designs" product status and should not be selected for new circuit development despite meeting electrical specifications.

Frequently Asked Questions (FAQ)

Q: Can CR1206-FX-3320ELF replace RC3216F3320CS directly on the PCB?

A: Yes. Both parts share identical electrical specifications (332 Ω ±1%, 0.25W), temperature coefficient (±100ppm/°C), operating temperature range (-55°C to +155°C), and 1206 package dimensions. Physical dimensions are equivalent with maximum seated heights of 0.66mm and 0.75mm respectively, both within standard PCB assembly tolerances.

Q: What is the difference between CRCW1206332RFKEA and CRCW1206332RFKEAHP?

A: Both parts are manufactured by Vishay Dale with identical resistance (332 Ω), tolerance (±1%), and 1206 package. The primary difference is power rating: CRCW1206332RFKEA is rated 0.25W while CRCW1206332RFKEAHP is rated 0.75W with pulse withstanding capability. The higher power rating part can be used in applications requiring greater thermal margin.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts including CR1206-FX-3320ELF, RC1206FR-07332RL, AC1206FR-07332RL, CRCW1206332RFKEA, CRCW1206332RFKEAHP, ERJ-8ENF3320V, and RMCF1206FT332R carry ROHS3 compliance certification.

Q: Which substitute parts have automotive AEC-Q200 qualification?

A: AC1206FR-07332RL (YAGEO), CRCW1206332RFKEA (Vishay Dale), CRCW1206332RFKEAHP (Vishay Dale), ERJ-8ENF3320V (Panasonic), and RMCF1206FT332R (Stackpole Electronics Inc) are all qualified to AEC-Q200 automotive standards. The main part RC3216F3320CS and CR1206-FX-3320ELF (Bourns) do not carry this qualification.

Q: Can I use ERJ-8ENF3320V in a new product design?

A: No. ERJ-8ENF3320V is designated "Not For New Designs" by the manufacturer. While it meets all electrical and mechanical specifications, alternative parts with Active status should be selected for new circuit development.

Q: What is the significance of MSL 1 rating?

A: MSL (Moisture Sensitivity Level) 1 indicates unlimited shelf life without moisture bake requirements. All listed parts carry MSL 1 rating, meaning they can be stored and handled without special moisture control procedures prior to assembly.

Q: Are the physical dimensions identical across all substitute parts?

A: All parts use the 1206 (3216 Metric) package with length 0.122" to 0.126" (3.10mm to 3.20mm) and width 0.063" (1.60mm). Maximum seated heights range from 0.024" to 0.030" (0.60mm to 0.75mm), all within standard PCB assembly specifications. These dimensional variations do not affect interchangeability.