RC3216F32R4CS Equivalent & Substitute Parts Reference

Part Overview

The RC3216F32R4CS is a 32.4 Ohm ±1% 0.25W thick film chip resistor manufactured by Samsung Electro-Mechanics in 1206 (3216 Metric) package format. This component is classified as Active product status with moisture resistant characteristics and ROHS3 compliance. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and environmental ratings align with the original component's functional requirements.

Substiute Parts

RC3216F32R4CS

Samsung Electro-MechanicsIn Stock: 1151RC3216F32R4CS Datasheet

Current PartRFQ

RC1206FR-0732R4L

YAGEOIn Stock: 5599RC1206FR-0732R4L Datasheet

DirectRFQ

CRCW120632R4FKEA

Vishay DaleIn Stock: 15326CRCW120632R4FKEA Datasheet

SimilarRFQ

ERJ-8ENF32R4V

Panasonic Electronic ComponentsIn Stock: 16461ERJ-8ENF32R4V Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RC3216F32R4CS are qualified based on strict electrical and mechanical parameter matching:

Primary Substitution Criteria:

• Resistance value: 32.4 Ohms (exact match required)
• Tolerance: ±1% (exact match required)
• Power rating: 0.25W / 1/4W (exact match required)
• Package: 1206 (3216 Metric) (exact match required)
• Composition: Thick Film (exact match required)
• Temperature coefficient: ±100ppm/°C (exact match required)
• Operating temperature range: -55°C ~ 155°C (exact match required)
• RoHS compliance: ROHS3 Compliant (exact match required)
• Moisture sensitivity: MSL 1 (exact match required)

All identified substitute parts meet these criteria. Variations in physical dimensions (length, width, height) within standard manufacturing tolerances do not disqualify substitution eligibility. Packaging format differences (bulk versus Tape & Reel) represent logistics variations only and do not affect electrical or mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

Direct Substitutes (Active Product Status):

RC1206FR-0732R4L (YAGEO) and CRCW120632R4FKEA (Vishay Dale) are qualified direct substitutes for RC3216F32R4CS. Both maintain Active product status with full electrical and mechanical parameter equivalence. CRCW120632R4FKEA includes AEC-Q200 automotive qualification, providing additional reliability assurance for applications requiring automotive-grade components.

Conditional Substitute (Not For New Designs):

ERJ-8ENF32R4V (Panasonic Electronic Components) meets all electrical and mechanical specifications but carries "Not For New Designs" product status. This component is suitable for replacement applications, legacy system maintenance, and repair scenarios where existing design validation exists. New design implementations should prioritize Active status alternatives.

Compliance Considerations:

All substitute parts maintain ROHS3 compliance, REACH unaffected status, and MSL 1 moisture sensitivity rating. No additional environmental or regulatory constraints differentiate the substitute options.

Frequently Asked Questions (FAQ)

Q: Can RC1206FR-0732R4L replace RC3216F32R4CS in existing designs?

A: Yes. RC1206FR-0732R4L is electrically and mechanically equivalent with identical resistance (32.4 Ohms), tolerance (±1%), power rating (0.25W), package (1206), temperature coefficient (±100ppm/°C), and operating range (-55°C ~ 155°C). Both maintain Active product status and ROHS3 compliance.

Q: What is the difference between CRCW120632R4FKEA and RC3216F32R4CS?

A: Electrical and mechanical specifications are identical. CRCW120632R4FKEA includes AEC-Q200 automotive qualification, which RC3216F32R4CS does not specify. Physical dimensions vary slightly within standard manufacturing tolerances (length 3.20mm vs 3.20mm, height 0.60mm vs 0.66mm maximum seated height).

Q: Why is ERJ-8ENF32R4V marked "Not For New Designs"?

A: ERJ-8ENF32R4V carries obsolescence status indicating Panasonic has discontinued active development for new applications. The component remains functionally equivalent and suitable for replacement and repair applications where design validation already exists.

Q: Are packaging format differences (bulk vs Tape & Reel) significant for substitution?

A: Packaging format represents logistics and handling methodology only. Tape & Reel (TR) packaging does not affect electrical performance, mechanical fit, or environmental characteristics. Format selection depends on assembly process requirements and inventory management practices.

Q: Can these substitutes be used interchangeably in PCB assembly?

A: Yes. All substitute parts share identical 1206 (3216 Metric) package dimensions within standard manufacturing tolerances. PCB footprints, solder pad layouts, and assembly processes require no modification.

Q: Which substitute offers the highest reliability assurance?

A: CRCW120632R4FKEA (Vishay Dale) includes AEC-Q200 automotive qualification, indicating compliance with automotive industry reliability and testing standards. This certification provides additional assurance for applications requiring automotive-grade component performance.