RC3216F3160CS Equivalent & Substitute Parts

Part Overview

The RC3216F3160CS is a 316 Ohms ±1% 0.25W thick film chip resistor manufactured by Samsung Electro-Mechanics in 1206 (3216 Metric) package format. This component is classified as Active product status with moisture-resistant construction suitable for general industrial applications. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and compliance certifications align with the original component, enabling direct board-level replacement without circuit redesign.

Key Parameters

Parameter	Value
Resistance	316 Ohms
Tolerance	±1%
Power Rating	0.25W (1/4W)
Package / Case	1206 (3216 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the RC3216F3160CS is determined by strict alignment of the following parameters:

Critical Matching Parameters:

Resistance value: 316 Ohms
Tolerance: ±1%
Power rating: 0.25W (1/4W)
Package format: 1206 (3216 Metric)
Composition: Thick Film
Temperature coefficient: ±100ppm/°C
Operating temperature range: -55°C ~ 155°C
RoHS3 compliance
Moisture Sensitivity Level: 1

All identified substitute parts meet these electrical and mechanical specifications. Substitute parts are categorized as Direct Manufacturer equivalents (functionally identical across all specified parameters) or Similar variants (identical electrical performance with minor dimensional or feature variations).

Parameter Comparison

Manufacturer	Part Number	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op. Temp (°C)	Features	Product Status	RoHS3	MSL
Samsung Electro-Mechanics	RC3216F3160CS	316 Ω	±1%	0.25	1206	±100ppm/°C	-55 ~ 155	Moisture Resistant	Active	Yes	1
Bourns Inc.	CR1206-FX-3160ELF	316 Ω	±1%	0.25	1206	±100ppm/°C	-55 ~ 155	Moisture Resistant	Active	Yes	1
Panasonic Electronic Components	ERJ-8ENF3160V	316 Ω	±1%	0.25	1206	±100ppm/°C	-55 ~ 155	Automotive AEC-Q200	Not For New Designs	Yes	1
YAGEO	RC1206FR-07316RL	316 Ω	±1%	0.25	1206	±100ppm/°C	-55 ~ 155	Moisture Resistant	Active	Yes	1
Stackpole Electronics Inc	RMCF1206FT316R	316 Ω	±1%	0.25	1206	±100ppm/°C	-55 ~ 155	Automotive AEC-Q200	Active	Yes	1
Vishay Dale	CRCW1206316RFKEA	316 Ω	±1%	0.25	1206	±100ppm/°C	-55 ~ 155	Automotive AEC-Q200	Active	Yes	1

Engineering Selection Recommendations

For General Industrial Applications: CR1206-FX-3160ELF (Bourns Inc.) and RC1206FR-07316RL (YAGEO) are suitable direct substitutes. Both components maintain Active product status with moisture-resistant construction matching the original RC3216F3160CS specification.

For Automotive Applications: RMCF1206FT316R (Stackpole Electronics Inc) and CRCW1206316RFKEA (Vishay Dale) are qualified alternatives. Both components carry AEC-Q200 automotive qualification and Active product status, providing enhanced reliability assurance for automotive circuit designs.

Obsolescence Consideration: ERJ-8ENF3160V (Panasonic Electronic Components) carries "Not For New Designs" product status. This component remains functionally equivalent but should not be selected for new product development. Use only when existing inventory constraints or legacy system maintenance require this specific part.

Frequently Asked Questions (FAQ)

Q: Can CR1206-FX-3160ELF replace RC3216F3160CS directly on the PCB? A: Yes. Both components share identical electrical specifications (316 Ω ±1%, 0.25W), package format (1206), and operating temperature range (-55°C ~ 155°C). Physical dimensions are equivalent, enabling direct footprint compatibility.

Q: What is the difference between moisture-resistant and automotive AEC-Q200 variants? A: Moisture-resistant variants (CR1206-FX-3160ELF, RC1206FR-07316RL) are designed for general industrial environments. Automotive AEC-Q200 variants (RMCF1206FT316R, CRCW1206316RFKEA) undergo additional qualification testing for automotive reliability standards. Selection depends on application requirements, not electrical performance.

Q: Why is ERJ-8ENF3160V marked "Not For New Designs"? A: This designation indicates the manufacturer has discontinued active development for this product line. The component remains functionally equivalent and available in inventory but should not be specified in new circuit designs. Use only for replacement or maintenance of existing systems.

Q: Are all substitute parts RoHS3 compliant? A: Yes. All identified substitute parts carry ROHS3 Compliant status, matching the original RC3216F3160CS specification.

Q: What is Moisture Sensitivity Level (MSL) 1? A: MSL 1 indicates unlimited shelf life without moisture baking requirements. All listed components share this classification, ensuring equivalent handling and storage procedures.

Q: Can I mix different manufacturers in the same PCB assembly? A: Yes. All substitute parts meet identical electrical and mechanical specifications. Mixed-manufacturer assemblies are permissible from a functional standpoint. Verify procurement and quality assurance procedures with your supply chain management.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message