RC3216F30R9CS Equivalent & Substitute Parts Reference

Part Overview

The RC3216F30R9CS is a 30.9 Ohm ±1% 0.25W thick film chip resistor manufactured by Samsung Electro-Mechanics in 1206 (3216 Metric) package configuration. This component is classified as Active product status with moisture-resistant characteristics and operates across the temperature range of -55°C to 155°C. The part is ROHS3 compliant and carries MSL Level 1 rating, indicating unlimited moisture sensitivity protection. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, and environmental compliance requirements.

Substiute Parts

RC3216F30R9CS

Samsung Electro-MechanicsIn Stock: 1250RC3216F30R9CS Datasheet

Current PartRFQ

RC1206FR-0730R9L

YAGEOIn Stock: 13990RC1206FR-0730R9L Datasheet

DirectRFQ

CRCW120630R9FKEA

Vishay DaleIn Stock: 8962CRCW120630R9FKEA Datasheet

SimilarRFQ

ERJ-8ENF30R9V

Panasonic Electronic ComponentsIn Stock: 15027ERJ-8ENF30R9V Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RC3216F30R9CS are qualified based on the following critical parameters that determine functional and mechanical compatibility:

Electrical Parameters: Resistance value (30.9 Ohms), tolerance (±1%), and power rating (0.25W) must match exactly. Temperature coefficient (±100ppm/°C) and operating temperature range (-55°C to 155°C) establish thermal performance equivalence.

Mechanical Parameters: Package type (1206 / 3216 Metric), composition (thick film), and number of terminations (2) ensure physical and assembly compatibility.

Compliance Parameters: RoHS3 compliance and MSL Level 1 rating are mandatory for environmental and reliability standards alignment.

Packaging Format: Substitute parts may be supplied in different packaging configurations (Tape & Reel versus bulk) without affecting functional equivalence.

The identified substitute parts RC1206FR-0730R9L (YAGEO), CRCW120630R9FKEA (Vishay Dale), and ERJ-8ENF30R9V (Panasonic Electronic Components) satisfy all critical parameter requirements and are therefore functionally equivalent to the main part.

Parameter Comparison

Engineering Selection Recommendations

RC1206FR-0730R9L (YAGEO): This part is recommended as the primary substitute. It maintains Active product status, carries ROHS3 compliance, and provides identical electrical and thermal specifications. The part is available in high inventory (13,906 pcs) and is suitable for new design implementations.

CRCW120630R9FKEA (Vishay Dale): This part qualifies as a direct substitute with Active product status and ROHS3 compliance. It includes automotive AEC-Q200 qualification, which provides additional reliability assurance for applications requiring automotive-grade components. Inventory availability is 8,891 pcs.

ERJ-8ENF30R9V (Panasonic Electronic Components): This part meets all electrical and mechanical equivalence criteria and carries ROHS3 compliance with AEC-Q200 automotive qualification. However, the product status is classified as "Not For New Designs," which restricts its use to legacy system maintenance and repair applications only. Inventory is available at 14,927 pcs.

Frequently Asked Questions (FAQ)

Q: Can RC1206FR-0730R9L be used as a direct replacement for RC3216F30R9CS?

A: Yes. Both parts share identical resistance value (30.9 Ohms), tolerance (±1%), power rating (0.25W), package type (1206), composition (thick film), temperature coefficient (±100ppm/°C), operating temperature range (-55°C to 155°C), and compliance certifications (ROHS3, MSL 1). The parts are functionally equivalent.

Q: What is the difference between the substitute parts?

A: All three substitute parts meet the core electrical and mechanical requirements. RC1206FR-0730R9L and CRCW120630R9FKEA are both Active products suitable for new designs. CRCW120630R9FKEA and ERJ-8ENF30R9V include AEC-Q200 automotive qualification. ERJ-8ENF30R9V carries "Not For New Designs" status, limiting its application to maintenance and repair.

Q: Are there dimensional differences between the main part and substitutes?

A: Minor dimensional variations exist within acceptable tolerances. The main part (RC3216F30R9CS) has a length of 0.126" (3.20mm) and height of 0.026" (0.66mm). RC1206FR-0730R9L has a length of 0.122" (3.10mm) and height of 0.026" (0.65mm). CRCW120630R9FKEA matches the main part at 0.126" (3.20mm) length and 0.024" (0.60mm) height. ERJ-8ENF30R9V is 0.126" (3.20mm) length and 0.028" (0.70mm) height. All variations remain within 1206 package specifications and do not affect PCB assembly compatibility.

Q: Can these parts be used interchangeably in existing designs?

A: Yes, provided the design does not have specific manufacturer requirements or space constraints related to component height. All substitute parts are qualified for the same electrical performance and thermal operating conditions as the main part.

Q: Which substitute should be selected for automotive applications?

A: CRCW120630R9FKEA or ERJ-8ENF30R9V are appropriate for automotive applications due to AEC-Q200 qualification. For new automotive designs, CRCW120630R9FKEA is recommended due to Active product status. For legacy automotive system maintenance, ERJ-8ENF30R9V is acceptable despite "Not For New Designs" classification.

Q: What packaging formats are available for the substitute parts?

A: All substitute parts are supplied in Tape & Reel (TR) format, which is standard for automated assembly processes. The main part RC3216F30R9CS is supplied in bulk packaging. Packaging format does not affect component functionality or electrical performance.