RC3216F2870CS Equivalent & Substitute Parts

Part Overview

The RC3216F2870CS is a 287 Ohm ±1% 0.25W thick film chip resistor manufactured by Samsung Electro-Mechanics in the 1206 (3216 Metric) package. This component is classified as Active product status and is RoHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating. Substitute parts are identified when original inventory is unavailable, when alternative manufacturers are preferred for supply chain diversification, or when specific certifications such as automotive AEC-Q200 qualification are required for application requirements.

Substiute Parts

RC3216F2870CS

Samsung Electro-MechanicsIn Stock: 905RC3216F2870CS Datasheet

Current PartRFQ

CR1206-FX-2870ELF

Bourns Inc.In Stock: 25734CR1206-FX-2870ELF Datasheet

DirectRFQ

RC1206FR-07287RL

YAGEOIn Stock: 20536RC1206FR-07287RL Datasheet

DirectRFQ

CRCW1206287RFKEA

Vishay DaleIn Stock: 9928CRCW1206287RFKEA Datasheet

SimilarRFQ

ERJ-8ENF2870V

Panasonic Electronic ComponentsIn Stock: 55064ERJ-8ENF2870V Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RC3216F2870CS is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Resistance value: 287 Ohms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Package: 1206 (3216 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Number of terminations: 2
• RoHS3 compliance
• MSL 1 rating

All identified substitute parts meet these mandatory parameters. Substitute parts are further categorized as Direct Manufacturer equivalents or Similar parts based on feature alignment. Direct equivalents maintain identical electrical and mechanical specifications. Similar parts introduce additional certifications such as automotive AEC-Q200 qualification, which represents an enhancement rather than a deviation from base specifications.

Parameter Comparison

Engineering Selection Recommendations

Direct Manufacturer Equivalents (Preferred for Standard Applications):

CR1206-FX-2870ELF (Bourns Inc.) and RC1206FR-07287RL (YAGEO) are direct functional equivalents to the RC3216F2870CS. Both parts maintain Active product status, identical electrical specifications, and full RoHS3 compliance. These parts are suitable for applications requiring standard moisture-resistant thick film resistor performance without automotive qualification requirements. CR1206-FX-2870ELF offers the highest inventory availability at 25,717 pieces.

Similar Parts with Enhanced Certifications (Automotive Applications):

CRCW1206287RFKEA (Vishay Dale) and ERJ-8ENF2870V (Panasonic Electronic Components) include automotive AEC-Q200 qualification in addition to base specifications. CRCW1206287RFKEA maintains Active product status and is recommended for new automotive designs. ERJ-8ENF2870V carries a "Not For New Designs" status and should be used only for legacy system maintenance or replacement applications where existing designs already specify this part number.

Selection Criteria:

• For new designs without automotive requirements: Select CR1206-FX-2870ELF or RC1206FR-07287RL
• For automotive applications: Select CRCW1206287RFKEA
• For legacy system replacement only: ERJ-8ENF2870V is acceptable but not recommended for new designs

All substitute parts are REACH Unaffected and classified under ECCN EAR99 with HTSUS code 8533.21.0030.

Frequently Asked Questions (FAQ)

Q: Can I substitute RC3216F2870CS with CR1206-FX-2870ELF in my circuit?

A: Yes. CR1206-FX-2870ELF is a direct equivalent meeting all electrical and mechanical specifications. Both parts are 287 Ohm ±1% 0.25W thick film resistors in 1206 package with identical temperature coefficients and operating ranges. Physical dimensions are identical at 0.126" L x 0.063" W.

Q: What is the difference between the Direct Manufacturer equivalents and Similar parts?

A: Direct equivalents (CR1206-FX-2870ELF and RC1206FR-07287RL) provide standard moisture-resistant thick film performance. Similar parts (CRCW1206287RFKEA and ERJ-8ENF2870V) include automotive AEC-Q200 certification, which qualifies them for automotive applications but does not alter base electrical performance.

Q: Are there physical dimension differences I should consider?

A: Minor variations exist in seated height and length. RC1206FR-07287RL has a length of 0.122" (3.10mm) compared to 0.126" (3.20mm) for other parts. Seated heights range from 0.024" to 0.030". These variations are within standard 1206 package tolerances and do not affect PCB layout compatibility for standard applications.

Q: Why is ERJ-8ENF2870V marked "Not For New Designs"?

A: This designation indicates the part is in mature or declining production phase. While functionally equivalent and suitable for replacement in existing systems, new circuit designs should specify CRCW1206287RFKEA or other Active-status alternatives to ensure long-term supply availability.

Q: Can I use CRCW1206287RFKEA in non-automotive applications?

A: Yes. CRCW1206287RFKEA meets all standard specifications and exceeds requirements through AEC-Q200 certification. It is fully compatible with non-automotive applications and provides enhanced reliability margins.

Q: What packaging formats are available for these substitute parts?

A: All substitute parts are supplied in Tape & Reel (TR) format, suitable for automated assembly processes. The main part RC3216F2870CS is supplied in standard packaging format.

Q: Are all these parts RoHS3 compliant?

A: Yes. All listed parts including the main part RC3216F2870CS and all substitutes are RoHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating, indicating no moisture bake-out requirement prior to soldering.