RC3216F2802CS Equivalent & Substitute Parts Reference

Part Overview

The RC3216F2802CS is a 28 kOhms ±1% 0.25W chip resistor in 1206 (3216 Metric) package manufactured by Samsung Electro-Mechanics. This thick film, moisture-resistant resistor operates across -55°C to 155°C and is ROHS3 compliant with MSL 1 rating. The part is currently in active production status with 765 pieces available in inventory.

Substitute parts are necessary when the primary manufacturer part becomes unavailable, when supply chain optimization is required, or when design flexibility across qualified component sources is needed while maintaining identical electrical and mechanical specifications.

Substiute Parts

RC3216F2802CS

Samsung Electro-MechanicsIn Stock: 872RC3216F2802CS Datasheet

Current PartRFQ

CR1206-FX-2802ELF

Bourns Inc.In Stock: 25901CR1206-FX-2802ELF Datasheet

DirectRFQ

RC1206FR-0728KL

YAGEOIn Stock: 35694RC1206FR-0728KL Datasheet

DirectRFQ

CRCW120628K0FKEA

Vishay DaleIn Stock: 12899CRCW120628K0FKEA Datasheet

SimilarRFQ

ERJ-8ENF2802V

Panasonic Electronic ComponentsIn Stock: 44302ERJ-8ENF2802V Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict equivalence across all critical parameters. The following parameters must match identically between the main part and any substitute:

Mandatory Matching Parameters:

• Resistance value: 28 kOhms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Package: 1206 (3216 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C to 155°C
• Moisture sensitivity level: MSL 1
• RoHS compliance: ROHS3

Allowable Variations:

• Manufacturer identity (different qualified sources)
• Packaging format (Tape & Reel vs. bulk)
• Physical dimensions within tolerance (length, width, height seated)
• Product status (Active or Not For New Designs)
• Additional certifications (AEC-Q200 automotive qualification)

All four substitute parts meet these criteria and are electrically and mechanically interchangeable with RC3216F2802CS.

Parameter Comparison

Engineering Selection Recommendations

For Active Production Designs: CR1206-FX-2802ELF (Bourns Inc.) and RC1206FR-0728KL (YAGEO) are preferred substitutes. Both maintain active product status with high inventory availability (25,881 and 35,681 pieces respectively). These parts are suitable for new design implementations and provide supply chain redundancy.

For Automotive Applications: CRCW120628K0FKEA (Vishay Dale) and ERJ-8ENF2802V (Panasonic Electronic Components) include AEC-Q200 automotive qualification. CRCW120628K0FKEA is recommended for new automotive designs due to active product status. ERJ-8ENF2802V carries "Not For New Designs" status and should be used only for legacy system maintenance or replacement applications.

For General Industrial Applications: All four substitute parts are ROHS3 compliant with MSL 1 rating, making them suitable for standard industrial environments without moisture sensitivity constraints. Selection can be based on supply availability and packaging preference (Tape & Reel format).

Physical Dimension Considerations: All substitutes fit within standard 1206 package specifications. Height variations (0.60mm to 0.75mm seated) are within PCB assembly tolerances and do not affect electrical performance or mechanical fit.

Frequently Asked Questions (FAQ)

Q: Can RC1206FR-0728KL replace RC3216F2802CS directly on the PCB? A: Yes. Both parts are 1206 (3216 Metric) package with identical electrical specifications (28 kOhms ±1%, 0.25W, ±100ppm/°C, -55°C to 155°C). Physical dimensions are within standard PCB assembly tolerances.

Q: What is the difference between "Active" and "Not For New Designs" product status? A: Active parts are in current production and recommended for new designs. "Not For New Designs" indicates the manufacturer is phasing out the part but continues to supply existing inventory. ERJ-8ENF2802V falls into this category and should be used only for replacement or legacy applications.

Q: Are the automotive-rated parts (CRCW120628K0FKEA, ERJ-8ENF2802V) required for non-automotive applications? A: No. AEC-Q200 certification is an additional qualification for automotive use. For general industrial applications, standard parts without automotive rating are functionally equivalent and cost-effective.

Q: Does MSL 1 rating mean these resistors require special handling? A: No. MSL 1 (Unlimited) indicates unlimited shelf life without moisture sensitivity constraints. These parts do not require dry-pack storage or baking procedures before assembly.

Q: Can I mix different manufacturers in the same production batch? A: Yes. All four substitute parts meet identical electrical and mechanical specifications. Multi-source qualification is standard practice for supply chain resilience.

Q: What is the significance of the ±100ppm/°C temperature coefficient? A: This specification defines resistance value drift across the -55°C to 155°C operating range. All listed parts maintain this identical specification, ensuring consistent circuit performance across temperature extremes.

Q: Are there packaging format differences between the main part and substitutes? A: The main part (RC3216F2802CS) is listed with "-" packaging notation. All substitutes are supplied in Tape & Reel (TR) format, which is standard for automated PCB assembly. This does not affect electrical or mechanical compatibility.