RC3216F2670CS Equivalent & Substitute Parts Reference

Part Overview

The RC3216F2670CS is a 267 Ohm ±1% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Samsung Electro-Mechanics. This component is classified as Active product status with 713 pieces currently in stock. The part is designed for general-purpose applications requiring moisture-resistant thick film construction with standard industrial temperature range operation. Substitute parts are identified when original inventory is unavailable, when alternative manufacturers are preferred for supply chain diversification, or when specific certifications such as automotive AEC-Q200 qualification are required for application compliance.

Substiute Parts

RC3216F2670CS

Samsung Electro-MechanicsIn Stock: 726RC3216F2670CS Datasheet

Current PartRFQ

RC1206FR-07267RL

YAGEOIn Stock: 89040RC1206FR-07267RL Datasheet

DirectRFQ

CRCW1206267RFKEA

Vishay DaleIn Stock: 14776CRCW1206267RFKEA Datasheet

SimilarRFQ

ERJ-8ENF2670V

Panasonic Electronic ComponentsIn Stock: 73492ERJ-8ENF2670V Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RC3216F2670CS is determined by strict equivalence across the following parameters: resistance value (267 Ohms), tolerance (±1%), power rating (0.25W), package type (1206), composition (thick film), temperature coefficient (±100ppm/°C), operating temperature range (-55°C ~ 155°C), and regulatory compliance (ROHS3, REACH Unaffected, EAR99). All identified substitute parts meet these core electrical and mechanical specifications. Substitute parts are grouped into two categories: Direct Manufacturer Substitutes (functionally identical with standard industrial features) and Similar Manufacturer Substitutes (functionally identical with additional automotive AEC-Q200 certification). Product status variations are noted where applicable.

Parameter Comparison

Engineering Selection Recommendations

RC1206FR-07267RL (YAGEO) is the primary direct substitute for RC3216F2670CS. Both parts are Active status products with identical electrical specifications, standard industrial features, and full regulatory compliance. This part is suitable for applications where Samsung Electro-Mechanics supply is constrained and YAGEO sourcing is preferred. Inventory availability is significantly higher (89,010 pieces).

CRCW1206267RFKEA (Vishay Dale) is a functionally equivalent substitute with additional automotive AEC-Q200 certification. This part is recommended for applications requiring automotive-grade reliability qualification or when Vishay Dale supply chain integration is required. Product status is Active with substantial inventory (14,716 pieces).

ERJ-8ENF2670V (Panasonic Electronic Components) is functionally equivalent with automotive AEC-Q200 certification. However, this part carries "Not For New Designs" product status, indicating it is in mature/declining lifecycle phase. This part is suitable only for legacy system maintenance or replacement applications where existing design qualification already exists. New design implementations should avoid this part number.

All substitute parts maintain identical core electrical parameters, package compatibility, and regulatory compliance status (ROHS3, REACH Unaffected, EAR99). Selection between substitutes depends on supply availability, manufacturer preference, and automotive certification requirements.

Frequently Asked Questions (FAQ)

Q: Can RC1206FR-07267RL replace RC3216F2670CS in existing designs?

A: Yes. RC1206FR-07267RL is electrically and mechanically equivalent. Both parts share identical resistance (267 Ohms), tolerance (±1%), power rating (0.25W), package (1206), composition (thick film), temperature coefficient (±100ppm/°C), operating temperature range (-55°C ~ 155°C), and regulatory compliance. No circuit redesign is required.

Q: What is the difference between standard industrial and AEC-Q200 versions?

A: CRCW1206267RFKEA and ERJ-8ENF2670V include automotive AEC-Q200 certification, indicating qualification for automotive environmental and reliability standards. RC3216F2670CS and RC1206FR-07267RL are standard industrial grade without this certification. AEC-Q200 parts are required for automotive applications; standard industrial parts are suitable for general industrial and consumer applications.

Q: Why is ERJ-8ENF2670V marked "Not For New Designs"?

A: This product status indicates the part is in end-of-life or mature phase. Panasonic continues to supply existing inventory but does not recommend this part for new design implementations. Use this part only for legacy system maintenance or replacement where existing design qualification exists.

Q: Are all substitute parts available in Tape & Reel packaging?

A: Yes. All identified substitute parts (RC1206FR-07267RL, CRCW1206267RFKEA, ERJ-8ENF2670V) are supplied in Tape & Reel (TR) packaging, matching the original RC3216F2670CS packaging format for automated assembly compatibility.

Q: Do all parts meet ROHS3 and REACH compliance?

A: Yes. All parts listed (RC3216F2670CS, RC1206FR-07267RL, CRCW1206267RFKEA, ERJ-8ENF2670V) are ROHS3 Compliant, REACH Unaffected, and classified as EAR99 for export control purposes.

Q: What are the physical dimension differences between substitute parts?

A: Physical dimensions are within standard manufacturing tolerance for 1206 package. RC3216F2670CS and CRCW1206267RFKEA are 0.126" L x 0.063" W (3.20mm x 1.60mm). RC1206FR-07267RL is 0.122" L x 0.063" W (3.10mm x 1.60mm). ERJ-8ENF2670V is 0.126" L x 0.063" W (3.20mm x 1.60mm). Height variations range from 0.024" to 0.028" (0.60mm to 0.70mm). All dimensions are within 1206 package specification and are compatible with standard PCB footprints.