RC3216F23R2CS Equivalent & Substitute Parts Reference

Part Overview

The RC3216F23R2CS is a 23.2 Ohm ±1% 0.25W chip resistor manufactured by Samsung Electro-Mechanics in the 1206 (3216 Metric) package. This thick film, moisture-resistant component operates across -55°C to 155°C and is ROHS3 compliant. The part is currently in active production status with 1027 pieces available in inventory.

Equivalent and substitute parts are identified when applications require alternative sourcing due to inventory constraints, supply chain considerations, or specific certification requirements such as automotive AEC-Q200 qualification.

Substiute Parts

RC3216F23R2CS

Samsung Electro-MechanicsIn Stock: 1109RC3216F23R2CS Datasheet

Current PartRFQ

AC1206FR-0723R2L

YAGEOIn Stock: 3233AC1206FR-0723R2L Datasheet

UpgradeRFQ

ERJ-8ENF23R2V

Panasonic Electronic ComponentsIn Stock: 283091ERJ-8ENF23R2V Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RC3216F23R2CS are classified based on strict electrical and mechanical parameter alignment:

Substitution Criteria:

• Resistance value: 23.2 Ohms (exact match required)
• Tolerance: ±1% (exact match required)
• Power rating: 0.25W minimum (equal or higher acceptable)
• Package: 1206 (3216 Metric) (exact match required for PCB layout)
• Temperature coefficient: ±100ppm/°C (exact match required)
• Operating temperature: -55°C ~ 155°C minimum (equal or wider range acceptable)
• Composition: Thick Film (required for performance characteristics)
• Moisture sensitivity: MSL 1 (Unlimited) (equal or lower MSL acceptable)
• RoHS compliance: ROHS3 (required for regulatory compliance)

Identified Substitute Parts:

Upgrade Category: AC1206FR-0723R2L (YAGEO) — Meets all electrical parameters with additional AEC-Q200 automotive qualification and tape & reel packaging.

Similar Category: ERJ-8ENF23R2V (Panasonic Electronic Components) — Meets all electrical parameters with AEC-Q200 automotive qualification; marked as "Not For New Designs" but available in high inventory volume.

Parameter Comparison

Engineering Selection Recommendations

For Active Production Applications:

Select AC1206FR-0723R2L (YAGEO) when sourcing new inventory. This part maintains active product status, meets all electrical and mechanical specifications of the RC3216F23R2CS, and provides additional AEC-Q200 automotive qualification. Tape & reel packaging supports automated assembly processes.

For Existing Designs with Established Supply:

The RC3216F23R2CS remains the primary choice when current inventory is available and supply continuity is established.

For High-Volume or Automotive Applications:

AC1206FR-0723R2L is preferred due to AEC-Q200 certification and higher available inventory (3178 pieces).

For Legacy or Discontinued Product Support:

ERJ-8ENF23R2V is available in substantial inventory (283018 pieces) and meets all electrical parameters. However, this part is marked "Not For New Designs" and should be used only for replacement or repair of existing assemblies where the original specification is RC3216F23R2CS or equivalent.

Frequently Asked Questions (FAQ)

Q: Can AC1206FR-0723R2L directly replace RC3216F23R2CS on existing PCBs?

A: Yes. Both parts use the 1206 (3216 Metric) package with identical footprints. Electrical parameters (23.2 Ohms ±1%, 0.25W, ±100ppm/°C, -55°C ~ 155°C) are identical. Physical dimensions differ slightly (AC1206FR-0723R2L: 3.10mm L vs RC3216F23R2CS: 3.20mm L), but both fall within standard 1206 package tolerances and are PCB-compatible.

Q: What is the difference between "Upgrade" and "Similar" substitute classifications?

A: AC1206FR-0723R2L is classified as "Upgrade" because it is in active production status and provides additional AEC-Q200 automotive qualification. ERJ-8ENF23R2V is classified as "Similar" because it meets all electrical specifications but is marked "Not For New Designs," limiting its use to replacement applications.

Q: Are all three parts ROHS3 compliant?

A: Yes. RC3216F23R2CS, AC1206FR-0723R2L, and ERJ-8ENF23R2V are all ROHS3 compliant and suitable for regulated markets.

Q: What does MSL 1 (Unlimited) mean for handling?

A: MSL 1 (Unlimited) indicates the component has no moisture sensitivity limitations. These parts do not require special dry-pack storage or baking procedures prior to assembly.

Q: Can ERJ-8ENF23R2V be used in new product designs?

A: No. ERJ-8ENF23R2V is marked "Not For New Designs." It is suitable only for replacement, repair, or support of existing products where the original specification was met by this part number.

Q: Which part should be selected for automotive applications?

A: AC1206FR-0723R2L is the recommended choice for automotive applications due to AEC-Q200 qualification. ERJ-8ENF23R2V also carries AEC-Q200 certification but is restricted to legacy applications.

Q: Are there differences in temperature coefficient between the three parts?

A: No. All three parts have identical temperature coefficients of ±100ppm/°C and identical operating temperature ranges of -55°C ~ 155°C.