RC3216F2324CS

Part Overview

The RC3216F2324CS is a 2.32 MOhms ±1% chip resistor manufactured by Samsung Electro-Mechanics, rated at 0.25W (1/4W) power dissipation in a 1206 (3216 Metric) surface-mount package. This thick film, moisture-resistant component is classified as Active and is ROHS3 compliant. Alternative equivalent parts are available from other manufacturers to support supply chain flexibility and inventory optimization.

Substiute Parts

RC3216F2324CS

Samsung Electro-MechanicsIn Stock: 1039RC3216F2324CS Datasheet

Current PartRFQ

RC1206FR-072M32L

YAGEOIn Stock: 6824RC1206FR-072M32L Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts must meet the following critical parameters to ensure functional and mechanical compatibility:

• Resistance Value: 2.32 MOhms (exact match required)
• Tolerance: ±1% (required for circuit accuracy)
• Power Rating: 0.25W (1/4W) minimum
• Package / Case: 1206 (3216 Metric) form factor (required for PCB layout compatibility)
• Composition: Thick Film (maintains electrical characteristics)
• Operating Temperature Range: -55°C ~ 155°C (minimum coverage required)
• Temperature Coefficient: ±100ppm/°C
• RoHS Compliance: ROHS3 Compliant
• Moisture Sensitivity Level: MSL 1 (Unlimited)

The RC1206FR-072M32L from YAGEO meets all critical substitution criteria and is electrically and mechanically equivalent to the primary part.

Parameter Comparison

Engineering Selection Recommendations

Both the RC3216F2324CS and RC1206FR-072M32L are Active products with full ROHS3 compliance and REACH unaffected status, meeting all regulatory requirements. The primary distinction is packaging: the RC3216F2324CS is supplied in bulk format (978 Pcs in stock), while the RC1206FR-072M32L is supplied in Tape & Reel (TR) format with larger inventory availability (6714 Pcs in stock).

Selection should be based on procurement requirements: bulk packaging for smaller quantity needs or tape & reel for automated assembly processes. Both parts are electrically identical and mechanically interchangeable for the 1206 (3216 Metric) package footprint.

Frequently Asked Questions (FAQ)

Q: Can RC1206FR-072M32L replace RC3216F2324CS directly? A: Yes. Both parts are functionally and mechanically equivalent. They share identical resistance values (2.32 MOhms), tolerance (±1%), power rating (0.25W), package geometry (1206/3216 Metric), and operating specifications. Direct substitution on PCB layouts is supported.

Q: Are there dimensional differences between these parts? A: Minor dimensional variations exist within acceptable tolerances. RC3216F2324CS: 3.20mm L × 1.60mm W × 0.66mm H (max). RC1206FR-072M32L: 3.10mm L × 1.60mm W × 0.65mm H (max). Both fall within the 1206 package specification and are PCB-compatible.

Q: What is the significance of packaging type (bulk vs. Tape & Reel)? A: Packaging type affects supply chain logistics and assembly processes. Bulk packaging suits manual assembly and small-batch production. Tape & Reel format is optimized for automated pick-and-place assembly lines. Electrical and mechanical performance is identical.

Q: Are both parts RoHS compliant? A: Yes. Both RC3216F2324CS and RC1206FR-072M32L are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating, suitable for standard storage and handling conditions.

Q: Can I use these parts in high-temperature applications? A: Both parts support continuous operation from -55°C to 155°C with a temperature coefficient of ±100ppm/°C. Temperature stability is identical between manufacturers.