RC3216F19R6CS Equivalent & Substitute Parts Reference

Part Overview

The RC3216F19R6CS is a 19.6 Ohm ±1% 0.25W thick film chip resistor manufactured by Samsung Electro-Mechanics in 1206 (3216 Metric) package format. This component is classified as Active product status with moisture-resistant construction and operates across the temperature range of -55°C to 155°C. The part is ROHS3 compliant and carries MSL Level 1 rating, indicating unlimited moisture sensitivity protection.

Equivalent and substitute parts are identified based on matching electrical specifications (resistance value, tolerance, power rating), mechanical compatibility (package size and form factor), and environmental performance characteristics (temperature coefficient, operating temperature range, and regulatory compliance).

Substiute Parts

RC3216F19R6CS

Samsung Electro-MechanicsIn Stock: 1098RC3216F19R6CS Datasheet

Current PartRFQ

RC1206FR-0719R6L

YAGEOIn Stock: 11562RC1206FR-0719R6L Datasheet

DirectRFQ

CRCW120619R6FKEA

Vishay DaleIn Stock: 15900CRCW120619R6FKEA Datasheet

SimilarRFQ

ERJ-8ENF19R6V

Panasonic Electronic ComponentsIn Stock: 56276ERJ-8ENF19R6V Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RC3216F19R6CS is determined by the following mandatory parameters:

Electrical Equivalence Requirements:

• Resistance value: 19.6 Ohms (exact match required)
• Tolerance: ±1% (exact match required)
• Power rating: 0.25W / 1/4W (exact match required)
• Temperature coefficient: ±100ppm/°C (exact match required)
• Operating temperature range: -55°C to 155°C (exact match or wider range acceptable)

Mechanical Compatibility Requirements:

• Package type: 1206 (3216 Metric) (exact match required)
• Number of terminations: 2 (exact match required)
• Composition: Thick Film (exact match required)

Regulatory & Environmental Requirements:

• RoHS3 compliance (mandatory)
• MSL Level 1 or equivalent moisture protection (mandatory)
• REACH compliance status (must be unaffected or compliant)

All identified substitute parts meet these criteria. Variations in physical dimensions (length, width, height) within the 1206 package specification and differences in product status or feature sets (such as automotive AEC-Q200 qualification) do not disqualify substitution but are noted for application-specific considerations.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitutes (Active Product Status):

RC1206FR-0719R6L (YAGEO) and CRCW120619R6FKEA (Vishay Dale) are recommended as primary substitutes. Both parts maintain Active product status, ensuring continued availability and manufacturer support. YAGEO's RC1206FR-0719R6L offers direct electrical and mechanical equivalence with standard moisture-resistant construction. Vishay Dale's CRCW120619R6FKEA provides the same electrical specifications with additional automotive AEC-Q200 qualification, suitable for applications requiring automotive-grade reliability.

Secondary Substitute (Legacy Status):

ERJ-8ENF19R6V (Panasonic Electronic Components) is electrically and mechanically equivalent but carries "Not For New Designs" product status. This part is suitable for replacement in existing production runs or field service applications where the original part is unavailable, but should not be selected for new circuit designs due to its legacy classification.

Selection Criteria:

• For standard industrial applications: RC1206FR-0719R6L (YAGEO)
• For automotive or high-reliability applications: CRCW120619R6FKEA (Vishay Dale)
• For legacy system maintenance only: ERJ-8ENF19R6V (Panasonic)

All substitutes are ROHS3 compliant, MSL Level 1 rated, and REACH unaffected, meeting regulatory requirements equivalent to the original part.

Frequently Asked Questions (FAQ)

Q: Can RC1206FR-0719R6L replace RC3216F19R6CS in all applications?

A: Yes. Both parts share identical electrical specifications (19.6 Ohms ±1%, 0.25W), temperature characteristics (±100ppm/°C, -55°C to 155°C operating range), and mechanical compatibility (1206 package, 2 terminations). Minor dimensional variations (length 3.10mm vs 3.20mm, height 0.65mm vs 0.66mm) remain within 1206 package tolerances and do not affect circuit board layout or performance.

Q: What is the difference between moisture-resistant and automotive AEC-Q200 versions?

A: The RC3216F19R6CS and RC1206FR-0719R6L feature standard moisture-resistant thick film construction with MSL Level 1 protection. The CRCW120619R6FKEA and ERJ-8ENF19R6V include automotive AEC-Q200 qualification, indicating compliance with automotive industry reliability and environmental stress testing standards. AEC-Q200 parts are suitable for automotive applications but are not required for general industrial use.

Q: Why is ERJ-8ENF19R6V marked "Not For New Designs"?

A: "Not For New Designs" indicates that Panasonic has discontinued active development and marketing of this part number. While the part remains functionally equivalent and available in inventory, manufacturers recommend using active product alternatives for new circuit designs to ensure long-term supply chain stability and continued manufacturer support.

Q: Are all substitute parts available in Tape & Reel packaging?

A: Yes. All identified substitutes (RC1206FR-0719R6L, CRCW120619R6FKEA, and ERJ-8ENF19R6V) are supplied in Tape & Reel (TR) format, compatible with automated assembly equipment and standard component handling processes.

Q: Do substitute parts meet the same regulatory compliance as the original?

A: Yes. All substitute parts are ROHS3 compliant, MSL Level 1 rated, and REACH unaffected, matching the regulatory status of RC3216F19R6CS. No additional compliance verification is required for substitution in applications where the original part was approved.

Q: Can I use CRCW120619R6FKEA in non-automotive applications?

A: Yes. CRCW120619R6FKEA meets all electrical and mechanical requirements for general industrial applications. The automotive AEC-Q200 qualification represents additional testing and reliability assurance, not a restriction on use. This part is suitable for any application requiring a 19.6 Ohm ±1% 0.25W 1206 resistor.