RC3216F153CS Equivalent & Substitute Parts Reference

Part Overview

The RC3216F153CS is a 15 kOhms ±1% 0.25W thick film chip resistor manufactured by Samsung Electro-Mechanics in 1206 (3216 Metric) package format. This component is classified as Active product status with 793 pieces currently in stock. The RC3216F153CS serves as a standard general-purpose resistor for applications requiring moisture-resistant thick film construction across industrial and commercial temperature ranges. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, and compliance certifications to ensure direct circuit board compatibility.

Substiute Parts

RC3216F153CS

Samsung Electro-MechanicsIn Stock: 843RC3216F153CS Datasheet

Current PartRFQ

CR1206-FX-1502ELF

Bourns Inc.In Stock: 35388CR1206-FX-1502ELF Datasheet

DirectRFQ

CRG1206F15K

TE Connectivity Passive ProductIn Stock: 20854CRG1206F15K Datasheet

DirectRFQ

RC1206FR-0715KL

YAGEOIn Stock: 39689RC1206FR-0715KL Datasheet

DirectRFQ

RCG120615K0FKEA

Vishay DaleIn Stock: 3668RCG120615K0FKEA Datasheet

DirectRFQ

RMCF1206FG15K0

Stackpole Electronics IncIn Stock: 1119RMCF1206FG15K0 Datasheet

DirectRFQ

RMCF1206FT15K0

Stackpole Electronics IncIn Stock: 172432RMCF1206FT15K0 Datasheet

DirectRFQ

AC1206FR-0715KL

YAGEOIn Stock: 44809AC1206FR-0715KL Datasheet

SimilarRFQ

CRCW120615K0FKEA

Vishay DaleIn Stock: 88133CRCW120615K0FKEA Datasheet

SimilarRFQ

CRCW120615K0FKEAHP

Vishay DaleIn Stock: 40028CRCW120615K0FKEAHP Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RC3216F153CS are classified into two categories based on electrical and mechanical compatibility:

Direct Substitutes (Functionally Equivalent): Parts matching all critical parameters including 15 kOhms resistance, ±1% tolerance, 0.25W power rating, 1206 package, ±100ppm/°C temperature coefficient, -55°C to 155°C operating range, and ROHS3 compliance. These parts differ only in manufacturer, series designation, or packaging format (Tape & Reel vs. Cut Tape).

Similar Substitutes (Application-Dependent): Parts meeting core electrical specifications but with enhanced features such as Automotive AEC-Q200 qualification or higher power ratings (0.75W). These require design verification for specific application requirements.

Critical Substitution Parameters:

• Resistance value: 15 kOhms (fixed, non-negotiable)
• Tolerance: ±1% (precision requirement)
• Power rating: 0.25W minimum (thermal design constraint)
• Package: 1206 (3216 Metric) (PCB footprint compatibility)
• Temperature coefficient: ±100ppm/°C (stability specification)
• Operating temperature: -55°C to 155°C (environmental range)
• RoHS compliance: ROHS3 (regulatory requirement)

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement (No Design Changes Required):

Select from CR1206-FX-1502ELF (Bourns), CRG1206F15K (TE Connectivity), RC1206FR-0715KL (YAGEO), or RCG120615K0FKEA (Vishay Dale). These parts maintain identical electrical specifications, power rating, and operating temperature range as the RC3216F153CS. All are ROHS3 compliant and suitable for general industrial applications. Packaging format selection (Tape & Reel or Cut Tape) depends on assembly process requirements.

For Automotive or Enhanced Reliability Applications:

RMCF1206FG15K0, RMCF1206FT15K0 (Stackpole), AC1206FR-0715KL (YAGEO), or CRCW120615K0FKEA (Vishay Dale) provide Automotive AEC-Q200 qualification. These parts are suitable for automotive-grade circuits and applications requiring enhanced reliability screening. Selection between Cut Tape and Tape & Reel formats depends on production volume and assembly equipment compatibility.

For High-Pulse or Demanding Thermal Environments:

CRCW120615K0FKEAHP (Vishay Dale) offers 0.75W power rating with pulse withstanding capability. This part is suitable only for applications where the higher power dissipation capacity is required by design specification. Direct substitution with 0.25W rated parts is not appropriate for this variant.

Compliance Verification:

All listed substitute parts maintain ROHS3 compliance, MSL Level 1 (Unlimited moisture sensitivity), and REACH Unaffected status matching the original RC3216F153CS specification.

Frequently Asked Questions (FAQ)

Q: Can CRCW120615K0FKEAHP (0.75W) be used as a direct replacement for RC3216F153CS (0.25W)?

A: CRCW120615K0FKEAHP is electrically compatible but has higher power rating. It can be used in circuits designed for 0.25W resistors without functional degradation. However, this substitution is not necessary unless the design requires pulse withstanding capability or higher thermal margin. Verify PCB layout compatibility due to potential height differences (0.026" vs. 0.026" seated height).

Q: What is the difference between Cut Tape and Tape & Reel packaging?

A: Cut Tape (CT) and Digi-Reel packaging are suitable for manual or semi-automated assembly processes with lower volume requirements. Tape & Reel (TR) packaging is optimized for high-speed automated pick-and-place assembly. Electrical and mechanical specifications are identical; selection depends on production process and volume.

Q: Are Automotive AEC-Q200 qualified parts (RMCF, AC, CRCW series) suitable for non-automotive applications?

A: Yes. Automotive AEC-Q200 qualification indicates enhanced reliability screening and stricter manufacturing controls. These parts are fully compatible with non-automotive applications and provide equivalent or superior performance compared to standard industrial-grade resistors.

Q: What does Moisture Resistant feature indicate?

A: Moisture Resistant thick film construction provides enhanced protection against humidity and environmental moisture ingress. Parts with this feature (RC3216F153CS, CR1206-FX-1502ELF, RC1206FR-0715KL, AC1206FR-0715KL) are suitable for applications with elevated humidity exposure. Parts without this designation (CRG1206F15K, RCG120615K0FKEA, RMCF series, CRCW120615K0FKEA) are suitable for standard controlled environments.

Q: Can I substitute based on manufacturer preference alone?

A: No. Substitution must be based on matching electrical specifications (15 kOhms, ±1%, 0.25W), package format (1206), temperature coefficient (±100ppm/°C), operating range (-55°C to 155°C), and compliance requirements (ROHS3). Manufacturer preference is secondary to these technical requirements.

Q: What is Temperature Coefficient (±100ppm/°C) and why is it important?

A: Temperature coefficient specifies the maximum resistance change per degree Celsius across the operating temperature range. ±100ppm/°C means the resistance value can drift up to 0.01% per °C. All listed substitutes maintain this specification, ensuring consistent circuit performance across -55°C to 155°C operating range.

Q: Are there inventory considerations for substitute selection?

A: Yes. Current inventory levels vary: RMCF1206FT15K0 (172,342 pcs), CRCW120615K0FKEA (88,122 pcs), AC1206FR-0715KL (44,762 pcs), RC1206FR-0715KL (39,600 pcs), CRCW120615K0FKEAHP (39,921 pcs), CR1206-FX-1502ELF (35,337 pcs), RCG120615K0FKEA (3,586 pcs), RMCF1206FG15K0 (1,025 pcs). High-volume applications should prioritize parts with larger available inventory.