RC3216F150CS Equivalent & Substitute Parts Reference

Part Overview

The RC3216F150CS is a 15 Ohm ±1% 0.25W thick film chip resistor manufactured by Samsung Electro-Mechanics in 1206 (3216 Metric) package format. This component is classified as Active product status with moisture resistant characteristics and ROHS3 compliance. The part is suitable for general-purpose applications requiring precision resistive elements in compact surface-mount form factors.

Equivalent and substitute parts are necessary when the primary manufacturer part becomes unavailable, when alternative packaging formats are required, or when design specifications permit selection from qualified alternative manufacturers meeting identical electrical and mechanical parameters.

Key Parameters

Parameter	Specification
Resistance Value	15 Ohms
Tolerance	±1%
Power Rating	0.25W (1/4W)
Package / Case	1206 (3216 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Number of Terminations	2
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts for the RC3216F150CS are classified based on strict electrical and mechanical parameter matching. The following criteria determine substitution eligibility:

Primary Matching Criteria:

Resistance value: 15 Ohms (exact match required)
Tolerance: ±1% (exact match required)
Power rating: 0.25W (1/4W) for direct substitutes
Package: 1206 (3216 Metric) (exact match required)
Composition: Thick Film (exact match required)
Temperature coefficient: ±100ppm/°C (exact match required)
Operating temperature range: -55°C ~ 155°C (exact match required)
Number of terminations: 2 (exact match required)

Secondary Considerations:

RoHS compliance status (ROHS3 preferred for regulatory alignment)
Moisture Sensitivity Level (MSL 1 preferred for unlimited shelf life)
Product status (Active preferred; Discontinued or Not For New Designs noted for reference)
Packaging format (Tape & Reel or Cut Tape availability)
Manufacturer certifications (AEC-Q200 for automotive applications)

Parts are grouped into two categories: Direct Substitutes (meeting all primary criteria with identical power rating) and Similar Parts (meeting all primary criteria with variations in secondary characteristics or power rating).

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op Temp Range	Features	Product Status	RoHS	Packaging Format
RC3216F150CS	Samsung Electro-Mechanics	15 Ω	±1%	0.25	1206	±100ppm/°C	-55~155°C	Moisture Resistant	Active	ROHS3	-
CR1206-FX-15R0ELF	Bourns Inc.	15 Ω	±1%	0.25	1206	±100ppm/°C	-55~155°C	Moisture Resistant	Active	ROHS3	Tape & Reel
ERJ-8ENF15R0V	Panasonic Electronic Components	15 Ω	±1%	0.25	1206	±100ppm/°C	-55~155°C	Automotive AEC-Q200	Not For New Designs	ROHS3	Tape & Reel
RC1206FR-0715RL	YAGEO	15 Ω	±1%	0.25	1206	±100ppm/°C	-55~155°C	Moisture Resistant	Active	ROHS3	Cut Tape & Digi-Reel
RMCF1206FT15R0	Stackpole Electronics Inc	15 Ω	±1%	0.25	1206	±100ppm/°C	-55~155°C	Automotive AEC-Q200	Active	ROHS3	Tape & Reel
AC1206FR-0715RL	YAGEO	15 Ω	±1%	0.25	1206	±100ppm/°C	-55~155°C	Automotive AEC-Q200, Moisture Resistant	Active	ROHS3	Cut Tape & Digi-Reel
CRCW120615R0FKEA	Vishay Dale	15 Ω	±1%	0.25	1206	±100ppm/°C	-55~155°C	Automotive AEC-Q200	Active	ROHS3	Tape & Reel
CRCW120615R0FKEAHP	Vishay Dale	15 Ω	±1%	0.75	1206	±100ppm/°C	-55~155°C	Automotive AEC-Q200, Pulse Withstanding	Active	ROHS3	Tape & Reel
CRCW120615R0FKEB	Vishay Dale	15 Ω	±1%	0.25	1206	±100ppm/°C	-55~155°C	Automotive AEC-Q200	Discontinued at DiGi Electronics	ROHS3	Tape & Reel
CRCW120615R0FKTA	Vishay Dale	15 Ω	±1%	0.25	1206	±100ppm/°C	-55~155°C	Automotive AEC-Q200	Active	RoHS non-compliant	Cut Tape & Digi-Reel
KTR18EZPF15R0	Rohm Semiconductor	15 Ω	±1%	0.25	1206	±100ppm/°C	-55~155°C	Automotive AEC-Q200, High Voltage	Active	ROHS3	Tape & Reel

Engineering Selection Recommendations

Direct Substitutes (Identical Electrical and Mechanical Parameters, Active Status):

The following parts are qualified direct substitutes for RC3216F150CS in applications where the original part is unavailable:

CR1206-FX-15R0ELF (Bourns Inc.): Active product status with moisture resistant composition. Available in Tape & Reel packaging. ROHS3 compliant with MSL 1 rating. Suitable for general-purpose applications matching the original specification.
RC1206FR-0715RL (YAGEO): Active product status with moisture resistant composition. Available in Cut Tape & Digi-Reel packaging. ROHS3 compliant with MSL 1 rating. Dimensional tolerance (3.10mm length vs. 3.20mm) remains within acceptable mechanical fit for 1206 package footprints.
RMCF1206FT15R0 (Stackpole Electronics Inc): Active product status with Automotive AEC-Q200 certification. Available in Tape & Reel packaging. ROHS3 compliant with MSL 1 rating. Suitable for applications requiring automotive-grade qualification.
AC1206FR-0715RL (YAGEO): Active product status with both moisture resistant and Automotive AEC-Q200 features. Available in Cut Tape & Digi-Reel packaging. ROHS3 compliant with MSL 1 rating. Provides enhanced qualification for automotive environments.
CRCW120615R0FKEA (Vishay Dale): Active product status with Automotive AEC-Q200 certification. Available in Tape & Reel packaging. ROHS3 compliant with MSL 1 rating. Compact height (0.60mm seated) suitable for space-constrained applications.
KTR18EZPF15R0 (Rohm Semiconductor): Active product status with Automotive AEC-Q200 and High Voltage features. Available in Tape & Reel packaging. ROHS3 compliant with MSL 1 rating. Suitable for high-voltage circuit applications.

Conditional Substitutes (Variations in Secondary Characteristics):

ERJ-8ENF15R0V (Panasonic Electronic Components): Meets all primary electrical and mechanical parameters with Automotive AEC-Q200 certification. Product status is "Not For New Designs," indicating this part is suitable for replacement or maintenance applications only, not for new product development.
CRCW120615R0FKEB (Vishay Dale): Meets all primary electrical and mechanical parameters with Automotive AEC-Q200 certification. Product status is "Discontinued at DiGi Electronics," indicating limited availability through standard distribution channels.
CRCW120615R0FKTA (Vishay Dale): Meets all primary electrical and mechanical parameters with Automotive AEC-Q200 certification. RoHS compliance status is non-compliant (vs. ROHS3 for primary part), and REACH status is affected. Use only in applications where RoHS exemptions apply.

Higher Power Rating Alternative:

CRCW120615R0FKEAHP (Vishay Dale): Meets all primary electrical and mechanical parameters with 0.75W power rating (vs. 0.25W for primary part). Automotive AEC-Q200 and Pulse Withstanding features. ROHS3 compliant. Suitable for applications requiring higher power dissipation capability in the same package footprint.

Frequently Asked Questions (FAQ)

Q: Can CRCW120615R0FKEAHP (0.75W) be used as a direct replacement for RC3216F150CS (0.25W)?

A: CRCW120615R0FKEAHP is electrically and mechanically compatible with RC3216F150CS. The higher power rating (0.75W vs. 0.25W) does not prevent substitution; the component will function correctly in circuits designed for 0.25W resistors. However, the higher power rating is not required for applications designed around the 0.25W specification. Selection depends on circuit requirements and available inventory.

Q: What is the difference between "Active," "Not For New Designs," and "Discontinued" product status?

A: Active status indicates the manufacturer continues production and supports the part for new designs. "Not For New Designs" indicates the manufacturer no longer recommends the part for new product development but may continue limited production for replacement purposes. "Discontinued" indicates the part is no longer available through standard distribution channels. For new designs, select parts with Active status.

Q: Are all substitute parts ROHS3 compliant?

A: Most substitute parts listed are ROHS3 compliant. CRCW120615R0FKTA is RoHS non-compliant. Verify RoHS compliance requirements for your application before selection. ROHS3 compliance is mandatory for most consumer electronics and many industrial applications.

Q: What is the significance of Automotive AEC-Q200 certification?

A: AEC-Q200 is an automotive industry qualification standard for passive components. Parts bearing this certification have undergone additional reliability testing and are approved for automotive applications. Selection of AEC-Q200 certified parts is required for automotive circuit designs but is optional for general-purpose applications.

Q: Can I substitute a Cut Tape & Digi-Reel packaged part for a Tape & Reel packaged part?

A: Both packaging formats contain identical components; the difference is in the delivery format. Cut Tape & Digi-Reel is suitable for manual assembly or small-volume production. Tape & Reel is optimized for automated pick-and-place assembly. Substitution is possible if your assembly process accommodates the packaging format. Verify with your manufacturing or assembly department.

Q: What does MSL 1 (Unlimited) moisture sensitivity level mean?

A: MSL 1 indicates the component has unlimited shelf life and requires no special moisture control during storage or handling. This is the most favorable moisture sensitivity rating. All parts listed have MSL 1 rating, eliminating moisture-related compatibility concerns.

Q: Are there dimensional differences between substitute parts that affect PCB footprint compatibility?

A: All parts use the 1206 (3216 Metric) package with identical footprint dimensions. Minor variations in seated height (0.024" to 0.030") do not affect PCB layout or assembly. Verify component height clearance in your specific application if space constraints exist above the resistor.

Q: Which substitute part offers the best overall compatibility with RC3216F150CS?

A: CR1206-FX-15R0ELF (Bourns Inc.) and RC1206FR-0715RL (YAGEO) offer the closest compatibility. Both are Active status, ROHS3 compliant, MSL 1 rated, and match all primary electrical and mechanical parameters. CR1206-FX-15R0ELF is available in Tape & Reel format for automated assembly. RC1206FR-0715RL is available in Cut Tape & Digi-Reel format for flexible procurement options.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message