RC3216F14R0CS Equivalent & Substitute Parts

Part Overview

The RC3216F14R0CS is a 14 Ohm ±1% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Samsung Electro-Mechanics. This component is classified as Active product status with moisture resistant characteristics and unlimited moisture sensitivity level (MSL 1). The part is ROHS3 compliant and REACH unaffected, making it suitable for general industrial and commercial applications. Equivalent and substitute parts are identified based on matching electrical specifications, package dimensions, and compliance certifications to ensure direct functional replacement in circuit designs.

Substiute Parts

RC3216F14R0CS

Samsung Electro-MechanicsIn Stock: 920RC3216F14R0CS Datasheet

Current PartRFQ

ERJ-8ENF14R0V

Panasonic Electronic ComponentsIn Stock: 97875ERJ-8ENF14R0V Datasheet

DirectRFQ

RC1206FR-0714RL

YAGEOIn Stock: 49990RC1206FR-0714RL Datasheet

DirectRFQ

RMCF1206FT14R0

Stackpole Electronics IncIn Stock: 16214RMCF1206FT14R0 Datasheet

DirectRFQ

AC1206FR-0714RL

YAGEOIn Stock: 26121AC1206FR-0714RL Datasheet

SimilarRFQ

CRCW120614R0FKEA

Vishay DaleIn Stock: 16074CRCW120614R0FKEA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RC3216F14R0CS are qualified based on the following critical parameters:

Electrical Specifications: Resistance value of 14 Ohms, tolerance of ±1%, and power rating of 0.25W (1/4W) must be identical across all substitutes.

Package Compatibility: All substitute parts must use the 1206 (3216 Metric) surface mount package with 2 terminations to ensure mechanical and electrical compatibility with existing PCB layouts.

Environmental Specifications: Operating temperature range of -55°C to 155°C and temperature coefficient of ±100ppm/°C must be maintained.

Compliance Requirements: All substitute parts must be ROHS3 compliant and REACH unaffected to meet regulatory standards.

Composition: Thick film construction is maintained across all substitutes.

Parts are further categorized by product status (Active vs. Not For New Designs) and optional certifications such as Automotive AEC-Q200 qualification, which indicates suitability for automotive applications but does not restrict use in general applications.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitutes (Active Product Status):

RC1206FR-0714RL (YAGEO), RMCF1206FT14R0 (Stackpole Electronics Inc), AC1206FR-0714RL (YAGEO), and CRCW120614R0FKEA (Vishay Dale) are all qualified as direct substitutes with Active product status. These parts maintain identical electrical and environmental specifications to the RC3216F14R0CS and are suitable for new designs and production applications.

Secondary Substitute (Legacy Status):

ERJ-8ENF14R0V (Panasonic Electronic Components) is electrically and mechanically equivalent but carries Not For New Designs product status. This part is suitable for replacement applications and legacy system maintenance but should not be selected for new circuit designs.

Automotive Applications:

RMCF1206FT14R0, AC1206FR-0714RL, and CRCW120614R0FKEA include Automotive AEC-Q200 certification, indicating qualification for automotive-grade applications. These parts are interchangeable with the RC3216F14R0CS in general applications and provide additional assurance for automotive environments.

Moisture Resistance:

The RC3216F14R0CS and RC1206FR-0714RL are explicitly specified as moisture resistant. AC1206FR-0714RL combines both moisture resistant and AEC-Q200 features. All parts maintain MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions during storage and handling.

Frequently Asked Questions (FAQ)

Q: Can ERJ-8ENF14R0V be used as a direct replacement for RC3216F14R0CS?

A: ERJ-8ENF14R0V is electrically and mechanically equivalent with identical resistance, tolerance, power rating, package, and operating temperature specifications. However, it carries Not For New Designs product status. It is suitable for replacement and repair applications but should not be selected for new circuit designs.

Q: Are there dimensional differences between substitute parts?

A: Minor dimensional variations exist in seated height and length. RC3216F14R0CS and RC1206FR-0714RL have maximum seated heights of 0.026" (0.65mm), while ERJ-8ENF14R0V and RMCF1206FT14R0 have maximum seated heights of 0.028" (0.70mm). CRCW120614R0FKEA has a maximum seated height of 0.024" (0.60mm). Length varies between 0.122" (3.10mm) and 0.126" (3.20mm). These variations are within standard 1206 package tolerances and do not affect PCB layout compatibility.

Q: Which substitute parts are suitable for automotive applications?

A: RMCF1206FT14R0, AC1206FR-0714RL, and CRCW120614R0FKEA are qualified to Automotive AEC-Q200 standard. These parts are suitable for automotive-grade applications and are interchangeable with the RC3216F14R0CS in general industrial and commercial applications.

Q: Do all substitute parts have the same moisture sensitivity level?

A: Yes, all substitute parts maintain MSL 1 (Unlimited) rating, identical to the RC3216F14R0CS. This indicates no moisture sensitivity restrictions during storage, handling, or assembly processes.

Q: What is the difference between Direct and Similar substitute classifications?

A: Direct substitutes (ERJ-8ENF14R0V, RC1206FR-0714RL, RMCF1206FT14R0) are electrically and mechanically equivalent with identical specifications. Similar substitutes (AC1206FR-0714RL, CRCW120614R0FKEA) meet all electrical and mechanical requirements but may include additional features such as automotive certification or enhanced moisture resistance. All are functionally interchangeable for the specified application.

Q: Are all substitute parts ROHS3 compliant?

A: Yes, all substitute parts listed are ROHS3 compliant and REACH unaffected, matching the compliance status of the RC3216F14R0CS.