RC3216F1370CS Equivalent & Substitute Parts

Part Overview

The RC3216F1370CS is a 137 Ohm ±1% 0.25W thick film chip resistor manufactured by Samsung Electro-Mechanics in the 1206 (3216 Metric) package. This component is classified as Active and is currently in production. The part is moisture resistant with a temperature coefficient of ±100ppm/°C and operates across the -55°C to 155°C temperature range. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, and compliance certifications to ensure direct interchangeability in circuit applications.

Substiute Parts

RC3216F1370CS

Samsung Electro-MechanicsIn Stock: 895RC3216F1370CS Datasheet

Current PartRFQ

RC1206FR-07137RL

YAGEOIn Stock: 156539RC1206FR-07137RL Datasheet

DirectRFQ

CRCW1206137RFKEA

Vishay DaleIn Stock: 19379CRCW1206137RFKEA Datasheet

SimilarRFQ

ERJ-8ENF1370V

Panasonic Electronic ComponentsIn Stock: 38676ERJ-8ENF1370V Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RC3216F1370CS is determined by strict equivalence across the following parameters: resistance value (137 Ohms), tolerance (±1%), power rating (0.25W), package type (1206), composition (thick film), temperature coefficient (±100ppm/°C), operating temperature range (-55°C to 155°C), and compliance certifications (ROHS3, REACH Unaffected, EAR99). All identified substitute parts match these core electrical and mechanical specifications. Substitute parts are grouped by manufacturer and product status to facilitate selection based on availability and design phase requirements.

Parameter Comparison

Engineering Selection Recommendations

RC1206FR-07137RL (YAGEO): This part is a direct equivalent with Active product status. All electrical parameters and compliance certifications match the RC3216F1370CS. Dimensional variations are minimal and within standard PCB layout tolerances. This part is suitable for new designs and production applications.

CRCW1206137RFKEA (Vishay Dale): This part meets all electrical specifications and compliance requirements. It includes Automotive AEC-Q200 qualification, which provides additional reliability assurance for automotive and high-reliability applications. Product status is Active. The seated height is 0.024" (0.60mm), which is lower than the main part. This part is suitable for new designs and applications requiring automotive-grade components.

ERJ-8ENF1370V (Panasonic Electronic Components): This part matches all electrical specifications and compliance certifications. It includes Automotive AEC-Q200 qualification. However, the product status is listed as Not For New Designs. The seated height is 0.028" (0.70mm), which is higher than the main part. This part is suitable only for legacy design support and replacement applications where existing inventory must be maintained.

Frequently Asked Questions (FAQ)

Q: Can RC1206FR-07137RL be used as a direct replacement for RC3216F1370CS?

A: Yes. Both parts share identical electrical specifications (137 Ohms ±1%, 0.25W, ±100ppm/°C, -55°C to 155°C), package type (1206), composition (thick film), and compliance certifications (ROHS3, REACH Unaffected). Dimensional differences are within standard PCB layout tolerances.

Q: What is the difference between the Samsung and YAGEO versions?

A: The RC3216F1370CS (Samsung) and RC1206FR-07137RL (YAGEO) are electrically and mechanically equivalent. The primary differences are manufacturer, series designation (RC vs. RC_L), and minor dimensional variations in length (3.20mm vs. 3.10mm) and height (0.66mm vs. 0.65mm). Both are Active products suitable for new designs.

Q: Why is the Panasonic ERJ-8ENF1370V marked as Not For New Designs?

A: The ERJ-8ENF1370V carries a product status of Not For New Designs, indicating that Panasonic has discontinued active development and promotion of this part. While it remains electrically and mechanically compatible, it is recommended only for legacy applications and replacement scenarios where existing designs must be supported.

Q: Are there dimensional constraints I should consider when substituting these parts?

A: Yes. While all parts conform to the 1206 package standard, seated heights vary: RC3216F1370CS (0.66mm), RC1206FR-07137RL (0.65mm), CRCW1206137RFKEA (0.60mm), and ERJ-8ENF1370V (0.70mm). Length also varies slightly: 3.20mm (Samsung, Vishay, Panasonic) vs. 3.10mm (YAGEO). These variations are within standard PCB design tolerances but should be verified for space-constrained applications.

Q: What does AEC-Q200 qualification mean?

A: AEC-Q200 is an automotive industry standard qualification that certifies component reliability for automotive applications. Both CRCW1206137RFKEA (Vishay Dale) and ERJ-8ENF1370V (Panasonic) carry this qualification, making them suitable for automotive and high-reliability environments where enhanced quality assurance is required.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All identified substitute parts (RC1206FR-07137RL, CRCW1206137RFKEA, and ERJ-8ENF1370V) are ROHS3 compliant and REACH Unaffected, matching the compliance status of the RC3216F1370CS.

Q: Which substitute part should I select for a new automotive design?

A: CRCW1206137RFKEA (Vishay Dale) is the recommended choice for new automotive designs. It is Active, carries AEC-Q200 qualification, and meets all electrical and mechanical specifications. RC1206FR-07137RL (YAGEO) is also suitable if automotive qualification is not required.