RC3216F11R5CS Equivalent & Substitute Parts Reference

Part Overview

The RC3216F11R5CS is a 11.5 Ohm ±1% 0.25W thick film chip resistor manufactured by Samsung Electro-Mechanics in 1206 (3216 Metric) package format. This component is classified as Active product status and is RoHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating. Substitute parts are necessary to address supply chain continuity, alternative packaging formats, or specific application requirements such as automotive qualification.

Substiute Parts

RC3216F11R5CS

Samsung Electro-MechanicsIn Stock: 1000RC3216F11R5CS Datasheet

Current PartRFQ

RC1206FR-0711R5L

YAGEOIn Stock: 3823RC1206FR-0711R5L Datasheet

DirectRFQ

CRCW120611R5FKEA

Vishay DaleIn Stock: 25037CRCW120611R5FKEA Datasheet

SimilarRFQ

ERJ-8ENF11R5V

Panasonic Electronic ComponentsIn Stock: 21908ERJ-8ENF11R5V Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RC3216F11R5CS is determined by strict equivalence across the following parameters:

Critical Matching Parameters:

• Resistance value: 11.5 Ohms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Package format: 1206 (3216 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• RoHS3 compliance
• MSL rating: 1 (Unlimited)

All substitute parts listed meet these electrical and mechanical specifications. Variations in physical dimensions (length, width, height) within the 1206 package tolerance, packaging format (Tape & Reel vs. Cut Tape), and additional certifications (such as AEC-Q200 automotive qualification) do not affect functional substitutability for this resistor category.

Parameter Comparison

Engineering Selection Recommendations

RC1206FR-0711R5L (YAGEO): This part is a direct functional equivalent with Active product status. It is suitable for new designs and production applications. The Tape & Reel packaging format is standard for high-volume manufacturing environments.

CRCW120611R5FKEA (Vishay Dale): This part meets all electrical and mechanical specifications and carries AEC-Q200 automotive qualification. It is recommended for applications requiring automotive-grade components or where automotive supply chain traceability is mandated. Active product status supports long-term availability.

ERJ-8ENF11R5V (Panasonic Electronic Components): This part is electrically and mechanically equivalent but carries "Not For New Designs" product status. It is suitable only for legacy system maintenance, repair, or replacement applications where existing designs must be preserved. New design initiatives should not select this part.

Frequently Asked Questions (FAQ)

Q: Can RC1206FR-0711R5L replace RC3216F11R5CS in existing designs?

A: Yes. Both parts share identical electrical specifications (11.5 Ohms ±1%, 0.25W, ±100ppm/°C, -55°C ~ 155°C operating range) and package format (1206 / 3216 Metric). The primary difference is packaging format (Tape & Reel vs. bulk) and manufacturer. No circuit redesign is required.

Q: What is the difference between CRCW120611R5FKEA and the other substitutes?

A: CRCW120611R5FKEA includes AEC-Q200 automotive qualification, which is not present in the Samsung or YAGEO parts. This certification is required for automotive applications but is not necessary for general industrial or consumer electronics. All other electrical and mechanical parameters are identical.

Q: Why is ERJ-8ENF11R5V marked "Not For New Designs"?

A: This designation indicates that Panasonic has discontinued active development and promotion of this product line. While the part remains functionally equivalent and is in stock, it is intended only for sustaining existing products or repair applications. New product designs should select RC1206FR-0711R5L or CRCW120611R5FKEA.

Q: Are there physical dimension differences between these parts?

A: Minor variations exist within 1206 package tolerance. RC3216F11R5CS and CRCW120611R5FKEA are both 0.126" L × 0.063" W. RC1206FR-0711R5L is 0.122" L × 0.063" W. ERJ-8ENF11R5V is 0.126" L × 0.063" W. Height differences range from 0.024" to 0.028" (0.60mm to 0.70mm). These variations are within standard 1206 package specifications and do not affect PCB layout or assembly compatibility.

Q: Which substitute should I select for high-volume production?

A: RC1206FR-0711R5L (YAGEO) or CRCW120611R5FKEA (Vishay Dale) are both suitable for high-volume production. Both are Active status with substantial inventory availability. YAGEO offers Tape & Reel packaging optimized for automated assembly. Vishay Dale offers both Cut Tape and Digi-Reel® formats. Selection depends on your assembly equipment and supply chain preferences.

Q: Are all these parts RoHS3 compliant?

A: Yes. All listed parts—RC3216F11R5CS, RC1206FR-0711R5L, CRCW120611R5FKEA, and ERJ-8ENF11R5V—are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating. They are suitable for applications requiring RoHS compliance and do not require special moisture handling during storage or assembly.