RC3216F1182CS Equivalent & Substitute Parts

Part Overview

The RC3216F1182CS is a 1206 (3216 Metric) thick film chip resistor manufactured by Samsung Electro-Mechanics. This component provides 11.8 kOhms resistance with ±1% tolerance and 0.25W power rating. The part is classified as Active product status and is ROHS3 compliant with moisture sensitivity level 1 (unlimited). Equivalent and substitute parts are necessary when the primary part experiences supply constraints, inventory limitations, or when design requirements necessitate alternative sourcing from qualified manufacturers.

Substiute Parts

RC3216F1182CS

Samsung Electro-MechanicsIn Stock: 1179RC3216F1182CS Datasheet

Current PartRFQ

CR1206-FX-1182ELF

Bourns Inc.In Stock: 34264CR1206-FX-1182ELF Datasheet

DirectRFQ

RC1206FR-0711K8L

YAGEOIn Stock: 6106RC1206FR-0711K8L Datasheet

DirectRFQ

CRCW120611K8FKEA

Vishay DaleIn Stock: 10180CRCW120611K8FKEA Datasheet

SimilarRFQ

ERJ-8ENF1182V

Panasonic Electronic ComponentsIn Stock: 123312ERJ-8ENF1182V Datasheet

SimilarRFQ

RMCF1206FT11K8

Stackpole Electronics IncIn Stock: 44736RMCF1206FT11K8 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RC3216F1182CS is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Resistance value: 11.8 kOhms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Package: 1206 (3216 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• RoHS compliance: ROHS3
• Moisture sensitivity level: 1 (Unlimited)

All substitute parts listed meet these mandatory parameters. Substitute parts are categorized as Direct Manufacturer equivalents or Similar parts based on feature alignment. Direct equivalents share identical electrical and mechanical specifications. Similar parts include additional certifications (Automotive AEC-Q200) or represent legacy product status classifications.

Parameter Comparison

Engineering Selection Recommendations

Direct Manufacturer Equivalents (Preferred for Standard Applications):

CR1206-FX-1182ELF (Bourns Inc.) and RC1206FR-0711K8L (YAGEO) are direct equivalents with Active product status. Both parts maintain identical electrical specifications and ROHS3 compliance. Selection between these and the primary RC3216F1182CS part depends on supply availability and procurement lead times. Height variations (0.75mm and 0.65mm respectively versus 0.66mm for the primary part) are within acceptable PCB assembly tolerances for standard applications.

Similar Parts with Automotive Certification:

CRCW120611K8FKEA (Vishay Dale) and RMCF1206FT11K8 (Stackpole Electronics Inc) include Automotive AEC-Q200 certification. These parts are suitable for applications requiring automotive-grade reliability. Both maintain Active product status. CRCW120611K8FKEA offers the lowest maximum seated height (0.60mm), which may provide advantages in space-constrained designs.

Legacy Product Status:

ERJ-8ENF1182V (Panasonic Electronic Components) carries "Not For New Designs" product status. This part is electrically and mechanically equivalent but should not be selected for new product development. Use only when existing inventory exists or for replacement in legacy systems.

Frequently Asked Questions (FAQ)

Q: Can I substitute RC3216F1182CS with any of the listed parts in my design?

A: Yes, all listed parts meet the mandatory electrical and mechanical parameters. Direct equivalents (CR1206-FX-1182ELF and RC1206FR-0711K8L) are recommended for standard applications. Parts with AEC-Q200 certification are suitable for automotive applications. Avoid ERJ-8ENF1182V for new designs due to its legacy status.

Q: What is the significance of the height differences shown in the parameter comparison table?

A: Height variations range from 0.60mm to 0.75mm. These differences are within standard PCB assembly tolerances for 1206 package components. Height does not affect electrical performance. Verify PCB design clearances if space constraints exist in your application.

Q: Are all substitute parts ROHS3 compliant?

A: Yes, all listed substitute parts are ROHS3 compliant, matching the primary RC3216F1182CS part. All parts also maintain Moisture Sensitivity Level 1 (Unlimited).

Q: What does "Not For New Designs" mean for the ERJ-8ENF1182V part?

A: This designation indicates the part is in legacy status. Panasonic has discontinued active promotion of this part for new applications. Use existing inventory only for replacement or legacy system support. For new designs, select from Active status parts: CR1206-FX-1182ELF, RC1206FR-0711K8L, CRCW120611K8FKEA, or RMCF1206FT11K8.

Q: Do the automotive-certified parts (CRCW120611K8FKEA and RMCF1206FT11K8) work in non-automotive applications?

A: Yes. Automotive AEC-Q200 certification indicates enhanced reliability testing and qualification. These parts exceed standard requirements and function in any application requiring 11.8 kOhms ±1% 0.25W 1206 resistors. Use in non-automotive applications incurs no compatibility issues.

Q: What packaging format is available for these substitute parts?

A: All substitute parts are supplied in Tape & Reel (TR) format, suitable for automated assembly processes. The primary RC3216F1182CS part uses standard packaging. Confirm tape specifications with your procurement department if custom reel configurations are required.

Q: Can I mix different manufacturers' parts in the same production batch?

A: All listed parts meet identical electrical specifications and package requirements. Mixing manufacturers within a single batch is technically feasible. However, verify your quality assurance procedures and supply chain documentation requirements before implementing multi-source procurement.