RC3216F1132CS Equivalent & Substitute Parts Reference

Part Overview

The RC3216F1132CS is a 11.3 kOhms ±1% 0.25W chip resistor manufactured by Samsung Electro-Mechanics in 1206 (3216 Metric) package configuration. This thick film, moisture-resistant component operates across -55°C to 155°C and is classified as Active product status. Equivalent and substitute parts are identified when component availability is limited, supply chain disruptions occur, or design flexibility is required while maintaining electrical and mechanical compatibility within specified tolerance parameters.

Substiute Parts

RC3216F1132CS

Samsung Electro-MechanicsIn Stock: 835RC3216F1132CS Datasheet

Current PartRFQ

CR1206-FX-1132ELF

Bourns Inc.In Stock: 19748CR1206-FX-1132ELF Datasheet

DirectRFQ

RC1206FR-0711K3L

YAGEOIn Stock: 23060RC1206FR-0711K3L Datasheet

DirectRFQ

CRCW120611K3FKEA

Vishay DaleIn Stock: 10250CRCW120611K3FKEA Datasheet

SimilarRFQ

ERJ-8ENF1132V

Panasonic Electronic ComponentsIn Stock: 75539ERJ-8ENF1132V Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RC3216F1132CS is determined by strict equivalence across the following parameters: resistance value (11.3 kOhms), tolerance (±1%), power rating (0.25W), package type (1206), composition (thick film), temperature coefficient (±100ppm/°C), operating temperature range (-55°C to 155°C), and regulatory compliance (ROHS3, REACH Unaffected, EAR99). All identified substitute parts match these core electrical and mechanical specifications. Substitute parts are categorized as Direct or Similar based on feature alignment: Direct substitutes maintain identical moisture-resistant thick film construction; Similar substitutes add automotive AEC-Q200 qualification, which represents an enhancement rather than a deviation from base specifications.

Parameter Comparison

Engineering Selection Recommendations

Direct Substitutes (Preferred for Standard Applications):

CR1206-FX-1132ELF (Bourns Inc.) and RC1206FR-0711K3L (YAGEO) are direct functional equivalents with Active product status. Both maintain identical electrical specifications, moisture-resistant thick film construction, and regulatory compliance. Selection between these and the primary part RC3216F1132CS depends on supply availability and packaging format requirements (Tape & Reel for both substitutes).

Similar Substitutes (For Automotive Applications):

CRCW120611K3FKEA (Vishay Dale) qualifies as a similar substitute with added Automotive AEC-Q200 certification. This part maintains all core electrical and mechanical parameters while providing enhanced automotive-grade reliability qualification. Product status is Active, supporting new design implementations.

Legacy Consideration:

ERJ-8ENF1132V (Panasonic Electronic Components) carries "Not For New Designs" product status despite meeting all electrical specifications and AEC-Q200 automotive qualification. This designation indicates manufacturer discontinuation trajectory and should be avoided for new circuit designs, though existing inventory may serve legacy system support.

Frequently Asked Questions (FAQ)

Q: Can CR1206-FX-1132ELF replace RC3216F1132CS in existing designs?

A: Yes. CR1206-FX-1132ELF is a direct substitute matching all electrical parameters (11.3 kOhms ±1%, 0.25W, ±100ppm/°C, -55°C to 155°C), package type (1206), composition (thick film), and regulatory compliance (ROHS3). Both are Active status products.

Q: What is the difference between Direct and Similar substitutes?

A: Direct substitutes (CR1206-FX-1132ELF, RC1206FR-0711K3L) maintain identical feature sets including moisture-resistant thick film construction. Similar substitutes (CRCW120611K3FKEA, ERJ-8ENF1132V) add Automotive AEC-Q200 qualification, which is an enhancement. All meet the core 11.3 kOhms ±1% 0.25W 1206 specification.

Q: Are there physical dimension differences between substitute parts?

A: Minor variations exist within tolerance. RC3216F1132CS height is 0.026" (0.66mm); CR1206-FX-1132ELF is 0.030" (0.75mm); RC1206FR-0711K3L is 0.026" (0.65mm); CRCW120611K3FKEA is 0.024" (0.60mm); ERJ-8ENF1132V is 0.028" (0.70mm). All remain within 1206 package specification and are suitable for standard PCB assembly processes.

Q: Should ERJ-8ENF1132V be used in new designs?

A: No. ERJ-8ENF1132V carries "Not For New Designs" status, indicating manufacturer phase-out. Use CR1206-FX-1132ELF, RC1206FR-0711K3L, or CRCW120611K3FKEA for new circuit implementations.

Q: Which substitute is recommended for automotive applications?

A: CRCW120611K3FKEA (Vishay Dale) is the recommended choice for automotive applications, as it carries Automotive AEC-Q200 certification while maintaining Active product status and all core electrical specifications.

Q: Are all substitutes ROHS3 compliant?

A: Yes. All listed substitutes (CR1206-FX-1132ELF, RC1206FR-0711K3L, CRCW120611K3FKEA, ERJ-8ENF1132V) are ROHS3 Compliant with Moisture Sensitivity Level 1 (Unlimited) and REACH Unaffected status.