RC3216F1022CS Equivalent & Substitute Parts Reference

Part Overview

The RC3216F1022CS is a 10.2 kOhms ±1% 0.25W chip resistor in 1206 (3216 Metric) package manufactured by Samsung Electro-Mechanics. This thick film, moisture-resistant component operates across -55°C to 155°C and maintains ROHS3 compliance with MSL 1 rating. The part is currently in active production status with 725 pieces available in inventory.

Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and environmental ratings align with the original component, enabling direct replacement in circuit designs without functional degradation.

Substiute Parts

RC3216F1022CS

Samsung Electro-MechanicsIn Stock: 804RC3216F1022CS Datasheet

Current PartRFQ

CR1206-FX-1022ELF

Bourns Inc.In Stock: 48659CR1206-FX-1022ELF Datasheet

DirectRFQ

RC1206FR-0710K2L

YAGEOIn Stock: 99155RC1206FR-0710K2L Datasheet

DirectRFQ

CRCW120610K2FKEA

Vishay DaleIn Stock: 29818CRCW120610K2FKEA Datasheet

SimilarRFQ

CRCW120610K2FKEAHP

Vishay DaleIn Stock: 5954CRCW120610K2FKEAHP Datasheet

SimilarRFQ

ERJ-8ENF1022V

Panasonic Electronic ComponentsIn Stock: 49959ERJ-8ENF1022V Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict alignment of the following parameters:

Critical Matching Parameters:

• Resistance value: 10.2 kOhms
• Tolerance: ±1%
• Package / Case: 1206 (3216 Metric)
• Composition: Thick Film
• Temperature Coefficient: ±100ppm/°C
• Operating Temperature Range: -55°C ~ 155°C
• Moisture Sensitivity Level: 1 (Unlimited)
• RoHS Status: ROHS3 Compliant

Allowable Variation Parameters:

• Power Rating: 0.25W (1/4W) or higher
• Physical dimensions: Minor variations within 1206 package specification
• Height - Seated (Max): Variations acceptable within package constraints
• Packaging format: Tape & Reel acceptable for original cut-tape or reel applications

Parts are classified as Direct Substitutes when all critical parameters match exactly at 0.25W power rating. Parts are classified as Similar Substitutes when power rating exceeds 0.25W or additional features (automotive AEC-Q200 certification, pulse withstanding capability) are present, provided all other critical parameters align.

Parameter Comparison

Engineering Selection Recommendations

Direct Substitutes (Identical Specifications):

CR1206-FX-1022ELF (Bourns Inc.) and RC1206FR-0710K2L (YAGEO) are direct functional equivalents to RC3216F1022CS. Both maintain active product status, identical electrical parameters, and full ROHS3 compliance. Selection between these options depends on packaging format availability and supply chain requirements.

Similar Substitutes (Enhanced Specifications):

CRCW120610K2FKEA (Vishay Dale) provides identical electrical performance with automotive AEC-Q200 certification. This part is suitable for applications requiring automotive-grade reliability without increased power dissipation requirements.

CRCW120610K2FKEAHP (Vishay Dale) offers 0.75W power rating with pulse withstanding capability and automotive AEC-Q200 certification. This part is applicable when circuit design requires enhanced thermal margin or pulse immunity, while maintaining the same 1206 package footprint.

Legacy Consideration:

ERJ-8ENF1022V (Panasonic Electronic Components) meets all electrical and mechanical specifications but carries "Not For New Designs" status. This part is suitable only for legacy system maintenance or replacement applications where design continuity is required.

Frequently Asked Questions (FAQ)

Q: Can CRCW120610K2FKEAHP (0.75W) replace RC3216F1022CS (0.25W) in all applications?

A: Yes. The 0.75W rating is a superset capability. Higher power rating does not degrade performance in circuits designed for 0.25W operation. The component occupies identical 1206 package space and maintains all other electrical parameters.

Q: Are there dimensional differences between substitute parts?

A: Minor variations exist within 1206 package specification. Length ranges from 0.122" to 0.126" (3.10mm to 3.20mm) and height from 0.024" to 0.030" (0.60mm to 0.75mm). All variations remain within standard 1206 footprint tolerances and are compatible with standard PCB layouts.

Q: What is the significance of AEC-Q200 certification on CRCW120610K2FKEA and CRCW120610K2FKEAHP?

A: AEC-Q200 certification indicates automotive-grade qualification. These parts meet enhanced reliability and environmental stress testing requirements. They are suitable for automotive and industrial applications requiring higher reliability standards, while remaining compatible with standard consumer electronics applications.

Q: Why is ERJ-8ENF1022V marked "Not For New Designs"?

A: This designation indicates the manufacturer has discontinued active development and recommends alternative parts for new circuit designs. The part remains available for existing production and maintenance applications but should not be selected for new product development.

Q: Does packaging format (Tape & Reel vs. Cut Tape) affect electrical performance?

A: No. Packaging format affects only handling, storage, and assembly logistics. Electrical and mechanical specifications remain identical regardless of packaging format. Selection depends on manufacturing process requirements and inventory management practices.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts maintain ROHS3 compliance and MSL 1 (Unlimited) moisture sensitivity rating, matching the original RC3216F1022CS specification.