RC2012J910CS Equivalent & Substitute Parts

Part Overview

The RC2012J910CS is a 91 Ohm ±5% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by Samsung Electro-Mechanics. This component is actively produced and widely used in general-purpose applications requiring moisture-resistant thick film construction. Equivalent and substitute parts are identified based on matching electrical specifications (91 Ohms resistance, 0.125W power rating, 0805 package) and mechanical compatibility, with tolerance and feature variations available for upgraded performance requirements.

Key Parameters

Parameter	Value
Resistance	91 Ohms
Tolerance	±5%
Power Rating	0.125W (1/8W)
Package / Case	0805 (2012 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C to 155°C
Moisture Sensitivity Level	1 (Unlimited)
RoHS Status	ROHS3 Compliant
Packaging	Tape & Reel (TR)

Substitute Part Grouping Explanation

Substitute parts are classified into three categories based on electrical and mechanical compatibility with the RC2012J910CS:

Direct Equivalents maintain identical electrical specifications (91 Ohms, ±5% tolerance, 0.125W) and package format. These parts are pin-for-pin compatible with no circuit modifications required.

Upgrade Parts provide improved tolerance (±1% instead of ±5%) while maintaining the same 91 Ohm resistance, 0.125W power rating, and 0805 package. Upgrade parts may include additional certifications such as AEC-Q200 automotive qualification or enhanced features (moisture resistance, high voltage capability, pulse withstanding). These parts are electrically and mechanically compatible and can be substituted directly.

Similar Parts share the same 91 Ohm resistance and 0805 package but differ in power rating (0.5W instead of 0.125W) or feature set. These parts are mechanically compatible but represent a design upgrade with increased power handling capability.

Substitution compatibility is determined by:

Resistance value: 91 Ohms (exact match required)
Package / Case: 0805 (2012 Metric) (exact match required)
Operating temperature range: -55°C to 155°C (minimum requirement)
Composition: Thick Film (maintained across all substitutes)
RoHS compliance: ROHS3 Compliant (maintained across all substitutes)

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (Watts)	Temperature Coefficient	Operating Temperature	Height - Seated (Max)	Product Status	Features
RC2012J910CS	Samsung Electro-Mechanics	91 Ohms	±5%	0.125W	±100ppm/°C	-55°C ~ 155°C	0.026" (0.65mm)	Active	Moisture Resistant
RC0805JR-0791RL	YAGEO	91 Ohms	±5%	0.125W	±100ppm/°C	-55°C ~ 155°C	0.024" (0.60mm)	Active	Moisture Resistant
AC0805FR-0791RL	YAGEO	91 Ohms	±1%	0.125W	±100ppm/°C	-55°C ~ 155°C	0.024" (0.60mm)	Active	Automotive AEC-Q200, Moisture Resistant
ERJ-6ENF91R0V	Panasonic Electronic Components	91 Ohms	±1%	0.125W	±100ppm/°C	-55°C ~ 155°C	0.028" (0.70mm)	Active	Automotive AEC-Q200
KTR10EZPF91R0	Rohm Semiconductor	91 Ohms	±1%	0.125W	±100ppm/°C	-55°C ~ 155°C	0.026" (0.65mm)	Active	Automotive AEC-Q200, High Voltage
MCR10ERTF91R0	Rohm Semiconductor	91 Ohms	±1%	0.125W	±100ppm/°C	-55°C ~ 155°C	0.026" (0.65mm)	Discontinued at DiGi Electronics	—
RC0805FR-0791RL	YAGEO	91 Ohms	±1%	0.125W	±100ppm/°C	-55°C ~ 155°C	0.024" (0.60mm)	Active	Moisture Resistant
RMCF0805FT91R0	Stackpole Electronics Inc	91 Ohms	±1%	0.125W	±100ppm/°C	-55°C ~ 155°C	0.026" (0.65mm)	Active	Automotive AEC-Q200
CRCW080591R0FKEA	Vishay Dale	91 Ohms	±1%	0.125W	±100ppm/°C	-55°C ~ 155°C	0.020" (0.50mm)	Active	Automotive AEC-Q200
CRCW080591R0FKEAHP	Vishay Dale	91 Ohms	±1%	0.5W	±100ppm/°C	-55°C ~ 155°C	0.020" (0.50mm)	Active	Automotive AEC-Q200, Pulse Withstanding
ERJ-UP6F91R0V	Panasonic Electronic Components	91 Ohms	±1%	0.5W	±100ppm/°C	-55°C ~ 155°C	0.028" (0.70mm)	Active	Anti-Sulfur, Automotive AEC-Q200, Pulse Withstanding

Engineering Selection Recommendations

For Direct Replacement: RC0805JR-0791RL (YAGEO) is the primary direct equivalent, maintaining ±5% tolerance and 0.125W power rating with identical electrical performance. Both parts are actively produced and ROHS3 compliant.

For Tolerance Upgrade: RC0805FR-0791RL (YAGEO) provides ±1% tolerance improvement while maintaining moisture resistance and active production status. This part is suitable for applications requiring tighter resistance tolerances without additional certifications.

For Automotive Applications: AC0805FR-0791RL (YAGEO), ERJ-6ENF91R0V (Panasonic), KTR10EZPF91R0 (Rohm), RMCF0805FT91R0 (Stackpole), and CRCW080591R0FKEA (Vishay Dale) all carry AEC-Q200 automotive qualification with ±1% tolerance. Selection among these depends on specific feature requirements (high voltage capability, anti-sulfur properties) and availability.

For Higher Power Handling: CRCW080591R0FKEAHP (Vishay Dale, 0.5W) and ERJ-UP6F91R0V (Panasonic, 0.5W) provide increased power dissipation capability with pulse withstanding features, suitable for applications requiring enhanced thermal performance.

Avoid: MCR10ERTF91R0 (Rohm) is discontinued at DiGi Electronics and should not be selected for new designs despite meeting electrical specifications.

Frequently Asked Questions (FAQ)

Q: Can RC0805JR-0791RL replace RC2012J910CS directly? A: Yes. RC0805JR-0791RL is a direct equivalent with identical 91 Ohm resistance, ±5% tolerance, 0.125W power rating, and 0805 package. Both are moisture-resistant thick film resistors with the same operating temperature range and RoHS3 compliance. No circuit modifications are required.

Q: What is the difference between the main part and upgrade parts? A: Upgrade parts maintain the same 91 Ohm resistance and 0.125W power rating but provide ±1% tolerance instead of ±5%. Many upgrade parts include additional certifications such as AEC-Q200 automotive qualification. These parts are electrically and mechanically compatible and can be substituted directly.

Q: Are parts with 0.5W power rating compatible? A: CRCW080591R0FKEAHP and ERJ-UP6F91R0V are mechanically compatible in the 0805 package but provide 0.5W power rating instead of 0.125W. These parts can be used as upgrades for applications requiring higher power dissipation. The increased power rating does not affect circuit operation in applications designed for 0.125W resistors.

Q: What does AEC-Q200 certification mean? A: AEC-Q200 is an automotive qualification standard indicating the part meets reliability and performance requirements for automotive applications. Parts with this certification are suitable for automotive and high-reliability applications but can also be used in general-purpose circuits.

Q: Why do some parts have different seated heights? A: Seated height variations (0.020" to 0.028") result from different manufacturing processes and internal construction. These variations are within acceptable tolerances for standard PCB assembly and do not affect electrical performance or compatibility.

Q: Can I use MCR10ERTF91R0 as a substitute? A: MCR10ERTF91R0 meets all electrical and mechanical specifications but is discontinued at DiGi Electronics. For new designs and long-term supply assurance, select from actively produced alternatives such as RC0805FR-0791RL, AC0805FR-0791RL, or RMCF0805FT91R0.

Q: What is the difference between moisture-resistant and standard thick film resistors? A: Moisture-resistant thick film resistors include protective coatings to reduce moisture absorption and maintain performance in humid environments. RC2012J910CS, RC0805JR-0791RL, and RC0805FR-0791RL all feature moisture resistance. Standard thick film resistors without this feature may be used in dry environments but are not recommended for moisture-prone applications.

Q: Are all substitute parts ROHS3 compliant? A: Yes. All substitute parts listed are ROHS3 compliant, matching the environmental compliance of the main part RC2012J910CS.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message